• 대한원격탐사학회지
• /
• 제39권3호
• /
• pp.283-295
• /
• 2023

센서 및 위성 기술의 발전에 따라 전세계적으로 다양한 고해상도 다중대역 위성영상이 활용 가능해지고 있다. 다중대역 센서가 가지는 파장에 기인한 고유한 반사, 투과, 산란 특성에 따라 다중대역 위성영상은 지구 관측에 대한 다양한 상호보완적 지표정보를 제공한다. 특히, short-wave infrared (SWIR) 대역은 긴 파장으로 인해 가시광 대역에 비해 Rayleigh 산란에 적게 영향을 받으며, 이로 인해 특정 대기입자를 투과할 수 있다는 특징을 지닌다. 산불, 폭발 등에 의해 발생된 짙은 연기는 가시광 대역의 영상의 가시성을 저하시키고 일부 지역에 대한 지표를 차폐시키는데, SWIR 대역은 이러한 연기에 의해 가려진 지역에 대한 지표정보를 추가로 제공해주기도 한다. 본 연구에서는 이러한 SWIR 대역과 가시광 대역의 영상 정보를 융합하는 다중해상도 변환 기반의 영상 융합 기법을 제안하였다. 제안된 융합 기법의 목적은 상호보완적 관계에 있는 가시광 대역에서의 고해상도 세부적 배경정보와 SWIR 대역에서의 연기 지역에 대한 지표정보를 모두 내포하고 있는 단일 영상을 생성하는 것이다. 이를 위해 본 연구에서는 라플라시안(Laplacian) 피라미드 기반의 다중해상도 변환 기법을 가시광-SWIR 영상 융합에 적용하였다. 다중해상도 변환 기법은 영상 융합에 널리 활용되는 대표적인 영상분해 기반의 방법론으로, 각각의 원 영상을 다양한 스케일로 분해하여 융합하는 기법이다. 또한, 본 연구는 다중해상도 변환 기법에 haze-guided weight map을 융합한 방법론을 제안하였다. Haze-guided weight map은 SWIR 대역이 연기와 같은 특정 대기입자를 투과하여 지표에 대한 정보를 제공해줄 수 있다는 사전지식에 기반하여 제안된 알고리즘으로 다중해상도로 분해된 두 영상을 융합하는 기준이 되는 가중치 지도로써 활용되었다. 제안된 방법론은 가시광 및 SWIR 대역을 포함하고 있는 고해상도 다중대역 위성영상인 Worldview-3 위성영상을 활용하여 검증되었다. 실험 데이터는 주변 산불로 인해 연기가 발생하여 제한된 가시성을 지닌 연기 지역을 포함하고 있으며, 제안된 방법론의 투과 특성을 검증하기 위해 선정되었다. 제안된 기법에 대한 실험결과는 영상 품질 평가 지표를 활용한 정량평가 및 시각평가를 통해 분석되었으며, 결과분석을 통해 연기 지역에 대한 지표정보를 내포하는 SWIR 대역의 밝은 특징값과 가시광 대역 내의 고해상도 정보가 손실없이 최종 융합 영상에 내포됨을 확인할 수 있었다.

• 콘크리트학회논문집
• /
• 제17권1호
• /
• pp.149-155
• /
• 2005

The purpose of this study is to investigate the flexural strengthening effects of CF(Carbon Fiber) sheet for the full-scale RC beams with multi-layer CF sheets. The partial strength reduction factors of CF sheets are suggested from the full-scale RC beams tests strengthened with multi-layer CF sheets up to six layers as well as material tests. From the material tensile tests, it was observed that the average tensile strengths of CF sheets per layer are decreased as the number of CF sheets is increased. Also the steep strength reductions of CF sheets in material test results at rupture are observed compared with the structural tests results for the full-scale RC beams strengthened with multi-layer CF sheets. Finally, the partial strength reduction factors far CF sheets up to six layers are suggested considering the effects of multi-layer and unit weight of CF sheets.

• 한국공간구조학회논문집
• /
• 제3권2호
• /
• pp.77-83
• /
• 2003

This paper presents decision making method of structural multi-objective fuzzy optimum problem. The data and behavior of many engineering systems are not know precisely and the designer is required to design the system in the presence of fuzziness in the multi-goals, constraints and consequences of possible actions. In this paper, in order to find a satisfactory solution, the membership functions are constructed for the fuzzy objectives subject to the fuzzy constraints, and two approaches are presented by using the different types of fuzzy decision making. Thus, multi-objective fuzzy optimum problem can be converted into single objective non-fuzzy optimum problem and satisfactory solution of the multi-objective fuzzy optimum problem can be found with general optimum programming. Illustrative numerical example of the ten bar truss for minimum weight and minimum deflection is provided to demonstrate the process of finding the solution and the results are discussed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.119-122
• /
• 2000

Recently polymer insulators are being used for outdoor high voltage applications. Polymer insulators for transmission line have significant advantages over porcelain and glass insulators, especially for ultra-high voltage transmission lines. Their advantages are light weight, vandalism resistance and hydrophobicity. Polymer insulators are a relatively new technology, but their expected life is still unknown. Therefore these estimating technique are very important. Their life time is related to weathering and operating condition. Multi-aging test is requested because aging factor is occurred by multi-aging than unique aging. The aging test about polymer insulators have mainly carried out by IEC 61109. This paper presents multi-stress chamber experiments and tracking wheel test to examine the tracking and erosion performance of polymer insulator for transmission. Multi-stress testing is able to demonstrate deficiencies of polymer insulator materials and designs, including the nature of interfaces in insulation design. We have investigated IEC 61109 Annex C (5000h aging test) and CEA tracking wheel test as test methods of artificial accelerated aging. The aging degree of polymer insulator is estimated by leakage current, measurement of hydrophobicity degree, damage conditions of insulator surface, withstand voltage test etc.

• 한국기계가공학회지
• /
• 제18권3호
• /
• pp.74-81
• /
• 2019

Herein, we performed a comparative study on approximate multi-objective design optimization, to realize a structural design to improve the weight and vibration performances of the knuckle - a car suspension component - considering various load conditions and vibration characteristics. In the approximate multi-objective optimization process, a regression meta-model was generated using the response surfaces method (RSM), while Kriging and back-propagation neural network (BPN) methods were applied for interpolation meta-modeling. The Pareto solutions, multi-objective optimal solutions, were derived using the non-dominated sorting genetic algorithm (NSGA-II). In terms of the knuckle design considered in this study, the characteristics and influence of the meta-model on multi-objective optimization were reviewed through a comparison of the approximate optimization results with the meta-models and the actual optimization.

• 한국생활과학회지
• /
• 제24권1호
• /
• pp.111-122
• /
• 2015

The purpose of this study was to identify the shoes satisfaction and selection criteria according to women's BMI. Data was collected from 323 women in their 20-40's. Factor analysis, one-way ANOVA, Chi-square test, and multi regression analysis were done. Women were segmented into the under weight group, the regular weight group, and the over weight group according to their BMI. The factors of shoes selection criteria were fit and practicality, appearance, fashion and brand, materials and sewing, comfort and economy, and size. Generally most women were satisfied with the styles of shoes but dissatisfied with materials and size. The underweight group's foot was shorter and narrower, shoes was shorter and heel height was higher but the over weight group was opposite. The under weight group were satisfied with higher heel and comfort and practical shoes. The regular weight group were satisfied with higher heel and comfort and economy shoes but the over weight group was dissatisfied with higher heel and comfort and economy shoes.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권8호
• /
• pp.1172-1179
• /
• 2010

이 논문에서는 Light-Weight Ethernet 기반 MiTS 네트워크에서 시스템 간의 통신 및 데이터 처리를 위한 프로토콜의 개발에 관한 내용을 다룬다. 개발을 위해, Light-Weight Ethernet 기반 MiTS 네트워크 프로토콜을 구성하는 NF 및 SF를 분석하고 그 내용을 바탕으로 라이브러리를 개발하며 검증한다. 프로토콜의 구성 요소인 NF는 UDP 기반의 멀티캐스팅 방식으로 데이터그램을 송/수신하는 역할을 하고 SF는 NF를 통해 송/수신된 메시지를 Sentence 및 바이너리 이미지로 구별하여 처리하는 역할을 한다.

• 국제학술발표논문집
• /
• The 5th International Conference on Construction Engineering and Project Management
• /
• pp.494-496
• /
• 2013

Cost-Benefit Analysis (CBA) is a systematic optimization process that allows users to compare different alternatives and to determine if a project is a solid investment. Many state DOTs have included CBA in their pavement management systems (PMSs) to help allocate state funds for maintenance, rehabilitation, resurfacing, and reconstruction of pavements. In a typical CBA, each pavement type has an assigned weight factor which represents the level of importance of this pavement type. To conduct an accurate CBA, it is essential to select appropriate weight factors. Arbitrarily assigning weights factors to pavements can lead to biased and inaccurate funding allocation decisions. The purpose for this paper is to outline a method to develop an ideal set of weight factors that can be utilized to conduct more accurate CBA. To this end, a matrix of all possible weight factors sets was developed. CBA was conducted for each set of weight factors to obtain a population of possible optimization solutions. Then a regression analysis was performed to establish the relationship between benefit and weight factors. Finally, a multi-objective genetic algorithm was applied to select the optimal set of weight factors. The findings from this study can be used by state DOTs to strategically manage their roadway systems in a cost effective manner.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2012년도 한국컴퓨터종합학술대회논문집 Vol.39 No.1(A)
• /
• pp.406-408
• /
• 2012

본 논문의 연구목적은 Grey Relational Analysis와 Interval Weight을 이용하여 다수의 업체가 있는 커뮤니티 환경에서 최적의 업체를 선정하기 위한 방법론을 제공하는 것이다. 일반적으로 하나의 의사를 결정하기 위해서는 대안과 이와 관련된 기준과 같은 다양한 변수들이 고려되어야 한다. 커뮤니티 내의 다수의 업체 평가를 위해 평가기준에 대한 가중치를 도출하고 최종적으로 평가결과를 도출하기 위해 Grey Relational Analysis와 Interval Weight에 기반을 둔 다중의사결정 방법을 제안하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.919-922
• /
• 2003

The correlation between noise and vibration by a heavy-weight floor impact was studied. The triggering technique was used for increasing the reliability and stability to measure the level of sound pressure, sound intensity and vibration acceleration. The simple finite element and rigid body analysis method were suggested to calculate the natural frequencies of the multi-layer floor system. The result show that the isolation material adapted to reduce the light-weight floor impact noise, causing the natural frequency lower, make resonance with dominant driving frequency, and increase the noise level very sharply. Therefore the noise level Peak in the region of low frequency, below 63Hz, would be related with the natural frequencies of the floor system.