• 한국유변학회:학술대회논문집
• /
• 한국유변학회 2006년도 춘계 학술발표회 논문집
• /
• pp.45-48
• /
• 2006

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.64-64
• /
• 2000

Since its discovery in 1991, the carbon nanotube has attracted much attention all over the world; and several method have been developed to synthesize carbon nanotubes. According to theoretical calculations, carbon nanotubes have many unique properties, such as high mechanical strength, capillary properties, and remarkable electronical conductivity, all of which suggest a wide range of potential applications in the future. Here we report the synthesis in the catalytic decomposition of acetylene at ~65 $0^{\circ}C$ over Ni deposited on SiO2, For the catalyst preparation, Ni was deposited to the thickness of 100-300A using effusion cell. Different approaches using porous materials and HF or NH3 treated samples have been tried for synthesis of carbon nanotubes. It is decisive step for synthesis of carbon nanotubes to form a round Ni particles. We show that the formation of round Ni particles by heat treatment without any pre-treatment such as chemical etching and observe the similar size of Ni particles and carbon nanotubes. Carbon nanotubes were synthesized by chemial vapour deposition ushin C2H2 gas for source material on Ni coated Si substrate. Ni film gaving 20~90nm thickness was changed into Ni particles with 30~90nm diameter. Heat treatment of Ni fim is a crucial role for the growth of carbon nanotube, High-resolution transmission electron microscopy images show that they are multi-walled nanotube. Raman spectrum shows its peak at 1349cm-1(D band) is much weaker than that at 1573cm-1(G band). We believe that carbon nanotubes contains much less defects. Long carbon nanotubes with length more than several $\mu$m and the carbon particles with round shape were obtained by CVD at ~$650^{\circ}C$ on the Ni droplets. SEM micrograph nanotubes was identified by SEM. Finally, we performed TEM anaylsis on the caron nanotubes to determine whether or not these film structures are truly caron nanotubes, as opposed to carbon fiber-like structures.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.73-76
• /
• 2005

Carbon nanotubes (CNTs) have attracted an increasing attention due to their superior mechanical properties and potential application in industries. The strength of CNT has been predicted or calculated through several simulation techniques but actual experiments on stress-strain behavior are rare due to its dimensional limit, nanoscale positioning/manipulation, and instrumental resolution. We have attempted to observe straining responses of a multi-walled carbon nanotube (MWNT) by performing an in-situ tensile testing in a scanning electron microscope. The carbon nanotube, having its both ends attached on a cantilever force sensor and Y-shaped support, was elongated by a computer-controlled nanomanipulator. Linear deformation and fracture behaviors of MWNT were successfully observed and its force-displacement curve was also measured from the bending stiffness and displacement of the force sensor and manipulator.

• Carbon letters
• /
• 제12권2호
• /
• pp.81-84
• /
• 2011

A novel experimental set-up allowing quantitative determination of the adsorption capacity of gas molecules on a surface under high-vacuum conditions is introduced. Using this system, the toluene adsorption capacities of various carbon nanostructures were determined. We found that for a give surface area, the adsorption capacities of toluene of multi-walled carbon nanotubes and nanodiamonds were higher than that of activated carbon, which is widely used as an adsorbent of volatile organic compounds. The adsorption of toluene was reversible at room temperature.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.480.2-480.2
• /
• 2014

Electrochemical capacitors have been the most strong energy storage devices due to high power density and long cycle stability. Pristine carbon nanotubes are promising electrode materials for excellent electrical conductivity and high specific surface area in electrochemical capacitor. However, the practical application of pristine carbon nanotubes was limited by the aggregation into bundles due to van der Waals force. In this research, we explained how multi-walled carbon nanotubes (MWCNT) functionalized by carboxyl, sulfonic, and amine groups (CNT-COOH, CNT-SO3H, CNT-NH2) to improve the performances of MWCNT. Functionalized CNTs showed two- to four-fold increase in capacitance over that of pristine CNTs, while maintaining reasonable cyclic stability. But, the CNT-COOH showed the lowest rate capability of 57% compared to 84%, 86% of CNT-SO3H and CNT-NH2. As demonstrated by the spectroscopic analysis, This reseach showed how surface functional group of carbon nanotubes change capacitor performances.

• Applied Microscopy
• /
• 제46권4호
• /
• pp.244-252
• /
• 2016

This paper describes a new design of carbon nanotube tip. $Nanocly^{TM}$ NC 7000 Thin Multiwall Carbon Nanotubes of carbon purity (90%) and average diameter tube 9.5 nm with a high aspect-ratio (>150) were used. These tips were manufactured by employing a drawing technique using a glass puller. The glass microemitters with internal carbon nanotubes show a switch-on effect to a high current level (1 to $20{\mu}A$). A field electron microscope with a tip (cathode)-screen (anode) separation at ~10 mm was used to characterize the electron emitters. The system was evacuated down to a base pressure of ${\sim}10^{-9}$ mbar when baked at up to ${\sim}200^{\circ}C$ overnight. This allowed measurements of typical Field Electron Emission characteristics; namely the current-voltage (I-V) characteristics and the emission images on a conductive phosphorus screen (the anode). Fowler-Nordheim plots of the current-voltage characteristics show current switch-on for each of these emitters.

• 한국표면공학회지
• /
• 제38권4호
• /
• pp.163-166
• /
• 2005

Carbon nanotube-copper composite structures were fabricated using composite plating method and their field emission characteristics were investigated. Multi-walled carbon nanotubes (MWNTs) synthesized by chemical vapor deposition were used in the present study. It was revealed that turn-on field was about $3.0\;V/{\mu}m$ with the current density of $0.1\;{\mu}A/cm^2.$ We observed relatively uniform emission characteristics as well as stable emission current Carbon nanotube-copper composite plating method is efficient and it has no intrinsic limit on the deposition area. Moreover, it gives strong adhesion between emitters and an electrode. Therefore, we recommend that carbon nanotube-copper composite plating method can be applied to fabricate electron field emitters for large area FEDs and large area vacuum lighting sources.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.49-49
• /
• 2009

Nanocomposites of gold nanoparticles and multi-walled carbon nanotubes (MWNTs) were prepared by electrostatic interaction. Gold nanopartic1es were stabilized by polyvinylpyrrolidone (PVP), sodium dodecyl sulfate (SDS) and poly(sodium-4-styrenesulfonate) (PSS) in aqueous medium, and MWNTs were modified by poly(diallyldimethylammonium)chloride (PDDA) in water. The as-perpared Au-MWNT nanocomposites were structurally and electrically characterized by transmission electron microscopy (TEM), field emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), UV/Vis spectroscopy, X-ray photoelectron spectroscopy (XPS) and cyclo voltammetry (CV). UV/Vis spectra of Au-MWNT nanocomposites showed the characteristic surface plasmon bands in the range of ~515nm, depending on the stabilizers. There is only slight change on the band shape with variation of stabilizing agents for gold nanoparticles. Through FE-SEM and TEM images, the distribution of gold, nanoparticles on the sidewalls of MWNTs was deliberately investigated on Au-MWNT nanocomposites treated with different stabilizers. XPS and CV showed redistribution of electron densities and changes in the binding energy states of nanopartic1es in nanocomposite respectively.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.445-447
• /
• 2008

본 연구에서는 다중벽 탄소나노튜브용 표면개질제를 리빙라디칼중합법을 통하여 제조하고, 이를 이용하여 표면개질되고 분산제어된 다중벽탄소나노튜브를 제조하고 염료감응형 태양전지의 대전극 재료로 사용하였다. 우선 리빙라디칼중합법 중 nitroxide mediated polymerization (NMP) 기술을 이용하여 poly(maleic anhydride-co-p-acetoxystyrene)-block-poly(p-acetoxystyrene)를 합성하고, 공중합체중의 maleic anhydride기에 이미드화 반응을 통하여 pyrene기를 도입하였다. 공중합체 중의 p-acetoxystyrene 반복단위들은 가수분해 반응을 통하여 p-hydroxystyrene 반복단위로 변환하였으며, 제조된 공중합체의 구조와 열 특성 등을 GPC, GC, $^1H$-NMR, TGA을 통하여 분석하였다. 제조된 공중합체를 이용하여 다중벽 탄소나노튜브의 표면을 polymer wrapping법으로 처리하였고, 표면개질된 탄소나노튜브의 분산성을 다양한 용매에서 비교분석하였다. 표면이 개질되고 페이스트 내에의 분산성이 향상된 다중벽탄소나노튜브를 염료감응태양전지의 대전극 제조에 응용하였으며, 표면처리 및 분산제어 여부에 따른 제작 특성 및 동작특성 등을 평가하였다.

• 한국분말재료학회지
• /
• 제21권5호
• /
• pp.343-348
• /
• 2014

A powder-in-sheath rolling (PSR) process utilizing a copper alloy tube was applied to a fabrication of a multi-walled carbon nanotube (CNT) reinforced aluminum matrix composite. A copper tube with an outer diameter of 30 mm and a wall thickness of 2 mm was used as a sheath material. A mixture of pure aluminum powders and CNTs with the volume contents of 1, 3, 5 vol% was filled in the tube by tap filling and then processed to 93.3% height reduction by a rolling mill. The relative density of the CNT/Al composite fabricated by the PSR decreased slightly with increasing of CNTs content, but showed high value more than 98%. The average hardness of the 5%CNT/Al composite increased more than 3 times, compared to that of unreinforced pure Al powder compaction. The hardness of the CNT/Al composites was some higher than that of the composites fabricated by PSR using SUS304 tube. Therefore, it is concluded that the type of tube affects largely on the mechanical properties of the CNT/Al composites in the PSR process.