• Journal of Korean Society of Archives and Records Management
• /
• v.7 no.1
• /
• pp.61-82
• /
• 2007

With changes of information environment on records managements, ERMS can be a suitable solution for managing multi-typed records. In this point, this study performed analysis and design of ERMS based on key functions and requirements to perform creation, preservation, management and use of electronic records. Especially, this study focused on interoperability with the related systems, security issues and back-up methods for secured preservation and management including fundamental requirements. Also, ERMS has a close relation with related systems such as intranet system, electronic document settlement system, and so on. compared to digital library managing information resources. Considering those features mentioned above, this study proposes functional requirements and a system architecture of ERMS which is satisfied with four characteristics of electronic records mentioned on ISO 15489 and environmental requirements.

• Transactions of the KSME C: Technology and Education
• /
• v.5 no.2
• /
• pp.89-95
• /
• 2017

LCD robot vertical frame lets a arm assembly with glass substrate move up and down, so it must have high stiffness and strength. We applied new manufacturing process by using design optimization process such as topology and size optimization in order to satisfy the request of high stiffness and light weight. The proposed model should be evaluated for endurance strength. Therefore fatigue assessment for weak point of aluminum welding area of vertical frame studied with hot spot stress approach. And the actual stress measuring from test was compared and evaluated with the dynamic stress calculated from multi-body dynamics considering flexible body.

• Journal of the Society of Naval Architects of Korea
• /
• v.53 no.6
• /
• pp.447-455
• /
• 2016

Precise propulsion shafting alignment of ships is very important to prevent damage of its support bearings due to excessive reaction forces caused by hull deflection, forces acted on propeller and crankshaft, and so forth. In this paper, a new iterative shafting alignment calculation procedure considering the interaction between shaft deflection and oil film pressure of Sterntube Journal Bearing (SJB) bush with single or multiple slopes is proposed. The procedure is based on a pressure analysis to evaluate distributed equivalent support stiffness of SJB by solving Reynolds equation and a deflection analysis of shafting system by a finite element method based on Timoshenko beam theory. SJB is approximated with multi-point biaxial elastic supports equally distributed to its length. Their initial stiffness values are estimated from dynamic reaction force calculated by assuming SJB as single rigid support. Then, the shaft deflection and the support stiffness of SJB are sequentially and iteratively calculated by applying a criteria on deflection variation between sequential calculation results. To demonstrate validity and applicability of the proposed procedure for optimal slope design of SJB, numerical analysis results for a shafting system are described.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.4 s.42
• /
• pp.189-196
• /
• 2006

The ABS method which is modeling the shape-design helps designers concentrate upon the design intuitively, using the modeling method based on the geometrical characteristics, the property information (a point. a curve. slopes. etc.). For the multi-sided patches, the ABS Modeling attempts the modeling with the uniform domain like a right triangle and a regular square. The mentioned method can reduce the speed of modeling but it can cause the difference from a designer's intention in the process of interpolation between the attributes for object modeling. Therefore, in this paper. we propose ABS modeling based on the Chordlength domain method to minimize such differences. The Chordlength, one of the methods generating irregular domain. is the technique transforming the domain in accordance with the length and form of attributes which a shape consists of. The Chordlength domain method is performed using MEL.

• Journal of Korea Multimedia Society
• /
• v.10 no.8
• /
• pp.1060-1067
• /
• 2007

We need various methods to develop MMORPG that is game genre which many users use among various game genre using Internet. Specially, to heighten efficiency of distributing work, Object-oriented language such as C++ is used and we need design techniques that can take advantage of enough object-oriented concept when making large-scale game. There is various pattern that can apply in software breakup design in GoF's design pattern for these design techniques. If you apply Observer pattern to Party System Design for forming community between game users, you can easily add new class and maintain system later. Party Play is one of the important system that is used to form game users' community in MMORPG games. The main point that must be considered in Party-Play-System is to divide evenly experience value and acquisition that is got by Party-Play among users according to each user's level. To implement Party Play System that consider maintenance of system, in this paper, we propose a method using GoF's Observer-Pattern, showing you that proposed method which has advantage to dynamic memory allocation and to virtual method call can be used usefully to change object to real time at program run and to add new class and to maintain system new.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.6360-6367
• /
• 2015

The location selection of the element that should guarantee easy visual perception, like the landmark, is the a topic that appears much in the design process. Recently, a graph analysis technique using computers has been applied in order to evaluate the visibility of the visual element, but the analytic frame is flat and the setting of the visual pont and the matrix are fixed so there were great limitations in obtaining the results of the practical analysis. Thus, this study presented Nondirectional Multi-Dimensional Calculation (MDVC-N), an analytic methodology available for the analysis of the dynamic visual point in the 3D environment. It thus attempted to establish the analytic application using the 3D computer graphics technology and designed a script structure to set the visual point and the matrix. In addition to that, this study tried to verify the analytic methodology by applying the complex land as an example model, where buildings in various heights of terrains with a high-differences are located, verifying the same analytic methodology. It thus tried to identify the visual characteristics of each alternative location. The following results were gained from the study. 1) The visibility can be measured quantitatively trough the application of the 6-alternatives. 2) Using the 3dimensional graph, intuitive analysis was possible. 3) It attempted to improve the analytic applicability by calculating the results corrected as a variable behavior from the local integration variable of the space syntax.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.2
• /
• pp.73-84
• /
• 1993

In this research, configuration design optimization of plane truss structure has been tested by using decomposition technique. In the first level, the problem of transferring the nonlinear programming problem to linear programming problem has been effectively solved and the number of the structural analysis necessary for doing the sensitivity analysis can be decreased by developing stress constraint into member stress approximation according to the design space approach which has been proved to be efficient to the sensitivity analysis. And the weight function has been adopted as cost function in order to minimize structures. For the design constraint, allowable stress, buckling stress, displacement constraint under multi-condition and upper and lower constraints of the design variable are considered. In the second level, the nodal point coordinates of the truss structure are used as coordinating variable and the objective function has been taken as the weight function. By treating the nodal point coordinates as design variable, unconstrained optimal design problems are easy to solve. The decomposition method which optimize the section areas in the first level and optimize configuration variables in the second level was applied to the plane truss structures. The numerical comparisons with results which are obtained from numerical test for several truss structures with various shapes and any design criteria show that convergence rate is very fast regardless of constraint types and configuration of truss structures. And the optimal configuration of the truss structures obtained in this study is almost the identical one from other results. The total weight couldbe decreased by 5.4% - 15.4% when optimal configuration was accomplished, though there is some difference.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.2
• /
• pp.173-178
• /
• 2014

In this study, we introduce ASM-based face recognition classifier and its design methodology with the aid of 2-dimensional 2-directional hybird preprocessing algorithm. Since the image of face recognition is easily affected by external environments, ASM(active shape model) as image preprocessing algorithm is used to resolve such problem. In particular, ASM is used widely for the purpose of feature extraction for human face. After extracting face image area by using ASM, the dimensionality of the extracted face image data is reduced by using $(2D)^2$hybrid preprocessing algorithm based on LDA and PCA. Face image data through preprocessing algorithm is used as input data for the design of the proposed polynomials based radial basis function neural network. Unlike as the case in existing neural networks, the proposed pattern classifier has the characteristics of a robust neural network and it is also superior from the view point of predictive ability as well as ability to resolve the problem of multi-dimensionality. The essential design parameters (the number of row eigenvectors, column eigenvectors, and clusters, and fuzzification coefficient) of the classifier are optimized by means of ABC(artificial bee colony) algorithm. The performance of the proposed classifier is quantified through yale and AT&T dataset widely used in the face recognition.

• Journal of the Korean Society of Food Culture
• /
• v.25 no.2
• /
• pp.179-188
• /
• 2010

In order to aide in the design of an improved menu book, which could play an important role as a marketing tool, the current version of the menu books and managers (subjects) of 295 restaurants in the Incheon area were examined. These were managers of Korean (36.3%), Western (25.8%), Japanese (14.6%), cafeteria (12.5%) and Chinese (10.8%) style restaurants. The level of service (self-evaluation, 3-point scale) was average $2.25{\pm}0.45$. The general colorings of the menu books were green (19.0%), brown (18.6%), black (17.6%), yellow (15.9%), red (13.6%) and blue (13.2%). The material of the menu book cover was mainly leather (35.9%), and the internal material was mainly coated paper (59.7%). Physically, the design was two-panel fold (38.3%), two-panel multi-page (35.6%), die style (10.2%), single panel (8.1%) and tent style (7.8%). The type sizes were unchanged in 49.9% of the menu books and in 61.7% photos were not used. 53.9% of menu books did not explain the menus, and 13.2% did not classify the items into groups. Emphasis of profit-making menus was not done in 66.8%. 51.5% of menu books were irreplaceable in parts. The emphasis of profit-making menus was less among the Korean style restaurants (p<0.001). The possibility of partial replacement of menu books was lower in both Korean and Chinese restaurants (p<0.001). The explanation of the items was lower in the Japanese restaurants (p<0.001). The classification of items into groups was lower in cafeteria (p<0.001). In cases in which there were both seasonal and event menus, the possibility of partial replacements of menu books was higher (p<0.001). Restaurants of which service level was less than ordinary were lower in the differentiation of type sizes (p<0.001), the use of photos (p<0.001), the explanation of menus (p<0.001), the classification of menus by groups (p<0.05), the emphasis of profit-making menus (p<0.001) and the possibility of partial replacement of menu books (p<0.001). If these study findings are applied to the designing of menu books, the role of the menu book as an important tool for marketing could be greatly improved.

• Transactions of the KSME C: Technology and Education
• /
• v.4 no.1
• /
• pp.3-10
• /
• 2016

Heat pump unit performance is represented by the COP(Coefficient of Performance) and expressed by the one point design condition according to KS C 9306. However, when heat pump operated to the real buildings, the simulations are changed continuously according to the actual weather conditions, the building load and heat pump source conditions. The purpose of this paper is to evaluate the APF(Annual performance factor) for a climate dependent building integrated air-to-air heat pump system in major cities in Korea. TRNSYS simulation tool with an international MV standard based IPMVP 4.4.2 was utilized to perform the annual performance analysis. The APF with the multi-performance data based method was calculated as 2.29 for Daejeon residential building case while Busan residential building case appeared as the highest with 2.36.