• 한국실내디자인학회논문집
• /
• 제20권4호
• /
• pp.74-82
• /
• 2011

All the phenomena and subjects of nature and society are within correlation interconnection, and they are inseparably connected one another. The elements of this interaction can be found out through the concept of transparency in the space composition of Korean traditional architecture. This study is focusing on the access space, in other words, a gate-house that is a buffer zone playing a process role up to the main space among successive spaces. It was chosen to be the subject of the study since it strengthens convergence into the main building and with the effect connecting spaces, it could show well the spatial possibility of transparency. Besides, the subject of the study is limited to the Moonru Multi roofs that improves the functionality of spaces between gate-houses, and it is intended to progress contents by comparative analysis of two kinds such as Seo Won gate-house and temple gate-house. Korean traditional architecture places emphasis on harmony within the whole spaces. There are intimate relations between surrounding environment, external spaces and internal spaces, and it is important understand the spatial relations according to the shape appearing through interactions of parts in the whole spaces. In conclusion, the Moonru Multi roofs is analyzed with the method of extracting the concept that is contained in the frame of analysis and through ecological views through a visible and structural method. It can be understood what kinds of method for communication were used for ancestors to recognize and use spaces with the deduced concept through the analysis of the Moonru Multi roofs with different character.

• 방송공학회논문지
• /
• 제12권6호
• /
• pp.565-573
• /
• 2007

본 논문에서는 JVT에서 표준화가 진행 중인 다시점 비디오 부호화의 부호화 효율을 높이기 위해 다시점 비디오의 예측구조의 특성을 고려하여 움직임벡터 예측값을 선택하는 방법을 제안한다. 다시점 비디오 부호화에서 시간 방향과 뷰 방향의 예측을 수행하면서 서로 다른 성향의 움직임벡터가 발생된다. 또한 주변 블록에서 시간 방향과 뷰 방향 참조의 움직임벡터가 혼재하는 상황에서 동일한 성향의 움직임벡터가 선택되지 않는 경우가 발생되어 움직임벡터의 예측 효율이 저하된다. 이에 다시점 비디오 부호화의 예측구조에 따라 움직임벡터 예측값을 선택할 수 있는 방법을 제안한다. 제안하는 움직임벡터 예측값 선택 방법을 통하여 다시점 비디오 부호화의 압축 효율을 높일 수 있었으며, JMVM 3.6에서 움직임벡터 예측값을 선택하는 방법을 사용하는 다시점 비디오 부호화와 비교하여 PSNR(Peak Signal-to-Noise Ratio)이 약$0.03{\sim}0.1$ dB 정도 향상되었다.

• 대한건축학회논문집:계획계
• /
• 제33권12호
• /
• pp.105-112
• /
• 2017

Through various media, damage of both smoking and second-hand smoking has been recognized, and brought global scale of interest in antismoking. In Korea, government has tightened regulations of smoking in non-smoking zone since December, 1980, and after National Health Promotion Act in 1995, non-smoking zone has been gradually expanded. On the other hand, there were law suits to find those regulation towards smokers are either unconstitutional or not for 4 times. In this current state, people need smoking area to prevent second-hand smoking and to consider smokers in multi-unit dwelling. Main purpose of this research is to plan smoking spaces based on various typology of multi-dwelling plan for protection of both smokers and non-smokers' right. The research group collected and analyzed the smoking behaviors in various multi-unit dwelling types such as flat type, tower type, hybrid type and others. Based on those data, the group found three phenomena. First, there are internal regulations in multi-unit dwelling to make non-smoking zone based on National Health Promotion Act and resident representative meeting decision. Second, main smoking activities are occurring at major traffic line and entrances. Third, smoking inside of multi-unit dwelling complex causes second-hand smoking to residents live in $1^{st}$ floor and when they enter. Therefore, one can achieve both smokers' and non-smokers' protection of right by creating a designated smoking space near main entrances of multi-unit dwelling complex to consider smokers' and prevents second-hand smoking by using shaft space, which is in core space, to ventilate tobacco smoke through roof.

• 한국전산유체공학회지
• /
• 제19권4호
• /
• pp.80-85
• /
• 2014

High-volume low-speed (HVLS) fans are one category of ceiling fan installed in large enclosings such as warehouses, large barns and health clubs in order to generate comfortable air circulation. As a rotary blade, aerodynamic performance of a HVLS fan is predominantly related to its airfoil(s), and the pitch and twist angles. This paper first, investigates the effects of airfoil on the performances of three different HVLS fans with NACA 5414, 6413 and 7415 airfoils. The fans have six untwisted blades with the diameter of 6 m and rotate at 60 RPM. The blades pitch angels are $12^{\circ}$, $12^{\circ}$ and $13^{\circ}$, respectively. The results are presented in the form of the aerodynamic forces and moments, volumetric flow rate and streamlines. Regarding the volumetric flow of air, the results show that the model with NACA 7415 has the best performance. Hence, two other HVLS fans with the same airfoil but, with four and five blades are studied in order to investigate the effects of number of blades. From the point of view of air circulation still the six-bladed fan is the best one; however, the five-bladed fan is more efficient in power consumption.

• 한국전산유체공학회지
• /
• 제21권1호
• /
• pp.103-109
• /
• 2016

With the rapid increase in the number of patients with cardiopulmonary diseases, more cardiopulmonary circulatory assist devices are also needed. These devices can be employed when heart and/or lung function poorly. Due to the critical role they take, these devices have to be designed optimally from both mechanical and biomechanical aspects. This paper presents the CFD results of a baseline model of a centrifugal blood pump for the ECMO condition. The details of flow characteristics of the baseline model together with the performance curves and the modified index of hemolysis(MIH) are investigated. Then, the geometry of baseline impeller and the volute are modified in order to improve the biomechanical performance and reduce the MIH value. The numerical simulations of two cases represent that when impeller radius and prime volume decrease the MIH value also decreases. In addition, the modified geometry shows more uniform pressure distribution inside the volute. The findings provide valuable information for further modification and improvement of centrifugal blood pumps from both mechanical and biomechanical aspects.

• Nuclear Engineering and Technology
• /
• 제53권5호
• /
• pp.1446-1453
• /
• 2021

In the past, several experimental investigations aiming at characterizing the natural circulation (NC) behavior in test facilities were carried out. They showed a variety of flow patterns characterized by an inverted U-shape of the NC flow curve versus primary mass inventory. On the other hand, attempts to reproduce such curves using thermal-hydraulic system codes, showed 10-30% differences between the measured and calculated NC mass flow rate. Actually, the used computer codes are generally based upon nodalization using single U-tube representation. Such model may not allow getting accurate simulation of most of the NC phenomena occurring during such tests (like flow redistribution and flow reversal in some SG U-tubes). Simulations based on multi-U-tubes model, showed better agreement with the overall behavior, but remain unable to predict NC phenomena taking place in the steam generator (SG) during the experiment. In the current study, the CATHARE code is considered in order to assess a NC characterization test performed in the four loops PKL facility. For this purpose, four different SG nodalizations including, single and multi-U-tubes, 1D and 3D SG inlet/outlet zones are considered. In general, it is shown that the 1D and 3D models exhibit similar prediction results up to a certain point of the rising part of the inverted U-shape of the NC flow curve. After that, the results bifurcate with, on the one hand, a tendency of the 1D models to over-predict the measured NC mass flow rate and on the other hand, a tendency of the 3D models to under-predict the NC flow rate.

• Journal of Welding and Joining
• /
• 제30권6호
• /
• pp.120-125
• /
• 2012

Because ships and offshore structures have very large dimensions and complicated shapes, it is difficult to determine the deformation or internal stress in the structure by simple lab tests. Thus, a rigorous analysis by using the computer simulation technology is essential for obtaining their distortions by considering the entire production process characteristics. The rapid development of computer technology made it possible to analyze the heat transfer phenomena, deformation and phase transformation in the welded joint. For large shell structures, shell elements modeling contributed primarily to this development. But if a welding is done by multi-pass, shell elements whose thickness are unchangeable can hard to describe the local situation. Recently, it was researched how to introduce the imaginary temperature for V grooved multi-layer butt welding in strain-boundary method (a kind of shrinkage methodologies). In the present study, we formulated the imaginary temperature for the double bevel and double V groove by considering the thickness change of each pass through the bead and the thickness directions simultaneously and also demonstrated the feasibility of the formula by applying it to the thermal distortion analysis of the erection process of crane pedestal.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권2호
• /
• pp.889-906
• /
• 2020

Analysis of multi-physics systems and the visualization of simulation data are crucial and difficult in computational science and engineering. In Korea, Korea Institute of Science and Technology Information KISTI developed EDISON, a web-based computational science simulation platform, and it is now the ninth year since the service started. Hitherto, the EDISON platform has focused on providing a robust simulation environment and various computational science analysis tools. However, owing to the increasing issues in collaborative research, data format standardization has become more important. In addition, as the visualization of simulation data becomes more important for users to understand, the necessity of analyzing input / output data information for each software is increased. Therefore, it is necessary to organize the data format and metadata for the representative software provided by EDISON. In this paper, we analyzed computational fluid dynamics (CFD) and computational structural dynamics (CSD) simulation software in the field of mechanical engineering where several physical phenomena (fluids, solids, etc.) are complex. Additionally, in order to visualize various simulation result data, we used existing web visualization tools developed by third parties. In conclusion, based on the analysis of these data formats, it is possible to provide a foundation of multi-physics and a web-based visualization environment, which will enable users to focus on simulation more conveniently.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권3호
• /
• pp.238-242
• /
• 2015

다중 효용 해수 담수화 설비에 적용되는 증기이젝터 진공장치에 대한 수치해석적 연구를 수행하였다. 본 연구의 목적은 해수 담수화 과정을 위한 증기이젝터 진공장치의 성능특성에 대한 수치적 검토를 수행하는 데에 있다. 증기이젝터 내부의 유동특성을 보다 잘 파악하고 최적의 설계를 도모하기 위하여, 노즐 사이즈 및 디퓨저 축소각의 변화와 같은 설계변수의 변화가 증기이젝터의 성능에 미치는 영향에 대해서도 논의하였다. 해석결과는 실험결과와 전반적으로 잘 일치함을 알 수 있으며, 목부에서의 shock train 현상도 잘 재현하고 있음을 알 수 있다.

• 지역연구
• /
• 제10권2호
• /
• pp.105-121
• /
• 1994

This study intends to analyze the trip and transportation structure of Seoul Metropolitan Area(SMA) where has been experiencing the rapid growth and the extra-concentration in the recent 2∼3 decades. By analyzing the trip and transportation structure which reveals the frame of travel flow phenomena on the real space, this paper evaluates the transporation policy realized in SMA for the last 10∼15 years. The policy implications of this paper are as follows; 1. The activities and the daily travel movement of SMA have been larger and more complex rapidly, but the transportation policy bas been poor. 2. The distribution of commuter's origins and destinatinos have been getting wider, and the distance between the home and the workplace longer. In short, the land use policy, the industrial policy, and housing policy have failed, and the coordination of those policies has been very poor. 3. The multi-center spatial structure was the official policy. Indeed, SMA has been reorgnized in such a way. But the implementation strategy was very poor. 4. Now, the for-business travels closely related with the multi-center structure, are increasing more and more rapidly. It is required that the strategic policy of mulit-center structure and the transportation policy should be coordinated. And as soon as possible, the more powerful mass transit system should be developed and constructed.