• 설비공학논문집
• /
• 제13권12호
• /
• pp.1255-1265
• /
• 2001

A numerical study has been conducted to characterize the transient flow in a utility gas turbine burning natural gas. The solution domain encompasses the supply gas pressure regulator to the combustor of the gas turbine that employs multi-nozzle fuel injectors. Some results produced for verification in the present study agree suite well with the experimental ones. It is found that the total gas flow may decrease noticeably during its combustion mode change, which would be the reason of momentary combustion upset, when a reference case of opening ratios of control valves in the system is applied. Several parameters are then varied in order to make the total gas flow stable over that period of time. Results of this study may be useful to understand the unsteady behavior of combustion system burning natural gas.

• 한국해양공학회지
• /
• 제3권2호
• /
• pp.87-100
• /
• 1989

해양구조물의 원통형 조인트에 대한 파괴역학적 피로수명 산출방법이 개발되었다. 개발된 방법을 이용해서 2평면 K형 조인트에 대한 피로수명을 구체적인 파괴역학적 방법으로 산출 하였다. 이 분석을 위해 용접부위 표면균열의 응력확대 계수를 3차원 유한요소법에 의해 계산하였다. 계산된 결과에 의하면 용접부위 표면균열 첨단은 단순한 Mode I형태를 보이지 않고 Mode I, II, III이 복합된 형태임이 입증되었다. 계산된 응력확대 계수를 사용해서 16개의 용접부위균열 성장형태를 일반적인 피로균열 성장법칙을 적용해서 계산하였고, 균열성장의 안정분석을 통해 각 균열의 최종 파괴상태를 파괴해석도면(failure assessment diagram)법을 이용해서 계산하였다.

• International Journal of Aeronautical and Space Sciences
• /
• 제12권4호
• /
• pp.305-317
• /
• 2011

This paper presents an overview on flutter boundary prediction in tests which is principally based on a system stability measure, named Jury's stability criterion, defined in the discrete-time domain, accompanied with the use of autoregressive moving-average (AR-MA) representation of a sampled sequence of wing responses excited by continuous air turbulences. Stability parameters applicable to two-, three- and multi-mode systems, that is, the flutter margin for discrete-time systems derived from Jury's criterion are also described. Actual applications of these measures to flutter tests performed in subsonic, transonic and supersonic wind tunnels, not only stationary flutter tests but also a nonstationary one in which the dynamic pressure increased in a fixed rate, are presented. An extension of the concept of nonstationary process approach to an analysis of flutter prediction of a morphing wing for which the instability takes place during the process of structural morphing will also be mentioned. Another extension of analytical approach to a multi-mode aeroelastic system is presented, too. Comparisons between the prediction based on the digital techniques mentioned above and the traditional damping method are given. A future possible application of the system stability approach to flight test will be finally discussed.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 제33회 추계학술대회논문집
• /
• pp.378-381
• /
• 2009

압축기에 불안정한 특성인 선회실속(Rotating stall)이 발생하면 압력 및 효율이 저하되고, 기계적인 손상도 야기한다. 이러한 불안정성을 개선하고 안정 운전영역을 넓히기 위해 4단 저속 축류압축기에 공기 분사(Air injection) 방법을 적용하여 안정성 개선 실험을 실시하였다. 동익 팁에 축방향으로 공기를 분사할 수 있도록 하기 위해 코안다 효과를 적용한 노즐을 사용하였고, 8개의 인젝터를 1단 동익 상단에 등간격으로 설치하였다. 축류 압축기 80% speed로 운전하면서 선회실속이 발생하기 전에 공기 분사를 실시하였고, 모드(Mode) 발생 유량의 5.4%에 해당하는 공기를 분사하여 약 4%의 안정성 개선 효과를 얻었다.

• Journal of Information Display
• /
• 제7권3호
• /
• pp.5-8
• /
• 2006

A novel a-Si TFT integrated gate driver circuit using multi-thread driving has been developed. The circuit consists of two independent shift registers alternating between the two modes, "wake" and "sleep". The degradation of the circuit is retarded because the bias stress is removed during the sleep mode. It has been successfully integrated in 14.1-in. XGA LCD Panel, showing enhanced stability.

• 한국항공우주학회지
• /
• 제36권1호
• /
• pp.62-71
• /
• 2008

액체로켓엔진에서 발생하는 고주파 연소불안정을제어하기 위하여 인젝터의 길이 변화를 줄 수 있는 다중 스월 인젝터의 감쇠효과를 분석하였다. 음향흡수자로서 인젝터의 효과를 분석하기 위하여 인젝터는 1/4 파장 공명기로 해석하였고, 상온에서 감쇠 효과의 적합성을 검증하였다. 인젝터 내부에 형성되는 air core의 부피가 감쇠 효과에 직접적인 영향을 주므로 이를 모사한 다수의 튜브로 실험을 하였다. 실험을 통해 각 모드의 배(anti-node point)에 장착된 인젝터의 수의 증가로 감쇠 효과가 커지는 것을 확인하였다. 또한 1L, 1T, 1L1T 모드에 동조된 인젝터들을 동시에 각 모드의 배에 장착했을 경우, 각 모드에서 단일 모드에 튜닝된 인젝터들을 장착하였을 경우와 거의 같은 감쇠 효과를 얻을 수 있었다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.303-308
• /
• 2004

The failure at the head section of rubble mound breakwaters is more important than other failure modes. because this initial failures will occur the failure of the trunk section and lead to the instability of the structure. The three-dimensional failure modes are discussed using the experimental data with multi-directional waves considering the failure modes. It was occurred by the topographical characteristics around the head of rubble mound breakwater. The spacial characteristics of failure mode around the rubble-mound structures can be summarized as follows: 1) It was clarified that the failure modes at the round head of a detached breakwater are classified as failure by plunging breaker on the slope, failure by direct incident wave force and failure at the rubble mound breakwaters. 2) The failure mode was found in the lower wave height than the design wave by the breaker depth effects and topography around structures. It is clarified that the structure was monitored safely designed for the design wave but the failure was occurred by the reason of breaker waves.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 추계학술대회 논문집
• /
• pp.144-149
• /
• 2001

The failure at the head section of rubble-mound detached breakwaters is more important than other failure modes. because this initial failures will occur the failure of the trunk section and lead to the instability of the structure. The three-dimensional failure modes are discussed using the experimental data with multi-directional waves considering the failure modes occurring around the head of the rubble-mound detached breakwater. The spacial characteristics of failure mode around the rubble-mound structures can be summarized as follows: 1) It was clarified that the failure modes at the round head of a detached breakwater are classified as failure by plunging breaker on the slope, failure by direct incident wave force and failure by scouring at the toe of the detached breakwater. 2) The failure mode was found in the lower wave height than the design wave by the breaker depth effects. It is clarified that the structure monitored was safely designed for the design wave but the failure was occurred by the reason of breaker waves and scouring processes at the toe 3) It was observed that scouring at the toe developed in the region where steady stream due to vorticity was generated and the spatial variation of scour at the toe of the round head was predominated by incident wave direction.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2023년도 춘계학술발표대회
• /
• pp.527-529
• /
• 2023

Generative Adversarial Networks (GANs) models have developed rapidly due to the emergence of various variation models and their wide applications. Despite many recent developments in GANs, mode collapse, and instability are still unresolved issues. To address these problems, we focused on the fact that a single GANs model itself cannot realize local failure during the training phase without external standards. This paper introduces a novel training process involving multiple GANs, inspired by auction mechanisms. During the training, auxiliary performance metrics for each GANs are determined by the others through the process of various auction methods.

• 한국해양공학회지
• /
• 제24권1호
• /
• pp.10-19
• /
• 2010

ANSYS multi-physics software was applied to solve the coupled dynamic problem related to a full-scale TLP foundation for floating wind turbines. In this coupled dynamics simulation, the forced oscillation imposed on the tethers' top resulting from the sway of the wind turbine platform and the self-excited vortex-induced vibration (VIV) along the tether span have been taken into account. The stability of this tensioned tether system has been validated in the form of separate static and dynamic analyses. The dynamic characteristics of the tensioned tether linked to the floating wind turbine were analyzed by the resultant modal form and its corresponding vortex shedding pattern. The calculated result shows that even a slight forced oscillation imposed on the tethers' top leads to the VIV amplification and enhances the risk of instability in the case of low pretension. It is also found that the "synchronization" would be aggravated when the top tension decreases and the "2P" vortex shedding mode takes place. The increased top tension imposed on the tethers contributes to the stability of the tensioned legs by diminishing the oscillation amplitude markedly.