• Tribology and Lubricants
• /
• v.17 no.4
• /
• pp.290-296
• /
• 2001

Lift-off means that the rotating journal surface separates from the leaf surface in an air-lubricated multi-leaf foil journal bearing. Lift-off builds up minimum film thickness which will provide load capacity between leaves and journal. In this paper an analysis of air-lubricated multi-leaf foil journal bearing was performed with effects of multi-leaf foil deflection and compressible lubrication equation simultaneously. Minimum film thickness built up versus journal speed predicts the lift off characteristics and these results will be useful in designing and selecting the proper speed of the air-lubricated multi-leaf foil journal bearing.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.3
• /
• pp.399-407
• /
• 1986

본 연구에서는 공기역학 탄성베어링의 설계에 필요한 기본이론에 대하여 고찰 하고 그의 신빙성을 그러한 베어링에 지지된 고속회전축의 진등측정을 통하여 검토하 고저 한다. 탄성베어링의 한 예로써 여러 개의 탄성박판이 겹쳐 저어널을 지지하는 겹판베어링(

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2000.11a
• /
• pp.177-185
• /
• 2000

The characteristics of multi-leaf feil bearing are investigated. The Foil bearing is preloaded and has several leaf foils modeled by curved beams. An analysis of the air foil bearing was performed, considering effects of foil deflection and compressible lubrication equation simultaneously. A parametric study shows that the number of foils significantly affect the static characteristics of air foil bearings and describes what the minimum film thickness means. The results include pressure profile, load capacity, dimensionless torque and minimum film thickness in the foil bearing.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.936-941
• /
• 2001

This paper deals with the design of oil-tree motor-driven two-stage centrifugal compressor supported by air-lubricated multi-leaf foil bearings. The design of this compressor is performed, based upon prediction of critical speeds, load capacity, and stability. It is demonstrated in this paper that multi-leaf foil bearings can be adopted to satisfactorily support this centrifugal compressor.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11a
• /
• pp.349-353
• /
• 2001

An air foil bearing is developed for the high speed generator. The bearing is type of multi-leaf and is stable on 60,000RPM. The vibration level is 12um(p-p) and the highest temperature level is below 100$^{\circ}C$. The dynamic parameter of air foil bearing is acquired by experimental method using exciter. The air foil bearing is also good condition at test of real generator and load condition. The condition of foil is very good after 3,000cycle start-stop test. Therefore the air foil bearing is ideal for high speed, light weight and modem turbo-machinery.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11a
• /
• pp.354-359
• /
• 2001

A flexible rotor was smoothly passed through its bending critical speed, which is supported by AFB. Then, maximum magnitude of the rotor vibration at the middle point was 25${\mu}$m. The test rig was largely consisted of air turbine, multi-leaf type air foil bearing and flexible rotor and its bending critical speed was 32,600 rpm. And the balancing system and method for field balancing of the flexible rotor were developd successfully.

• Korean Journal of Environmental Agriculture
• /
• v.22 no.4
• /
• pp.294-299
• /
• 2003

The seeds of naturally growing Heteropappus hispidus (Thunb.) were treated by nine different doses (0, 10, 20, 40, 80, 120, 160, 200, 300, 400 Gy) of gamma rays to investigate their germination rate and to quantity the characteristics of their germinated plants as like as leaf appearance and length, the formation rate of anthocyanin color in stem 30 days after germination, the formation rate of rosette leaf and multi-shoot, the flowering and seed-bearing, and shoot length. The germination rate at least up to 120Gy was not greatly affected but was rapidly decreased at over 160Gy. It seemed that lethal dose ($LD_{50}$) of germination was 160Gy. The leaf appearance and growth was also inhibited, but the formation rate of anthocyanin color in the flower stem was enhanced up to 30% with dose. The rosette plants were observed in plants irradiated with higher than 40Gy. Multi-shoots were developed over 80Gy. For a short shoot length and bundle of thin stem, it was considered that they can be selected as the potential pot flower plants, through genetic fixation. In particular, it was suggested that the formation of anthocyanin color in flower stem, rosette and multi-shoot plants induced by the high dose of gamma rays could be utilized as the morphological markers for the mutant selection of Heteropappus hispidus (Thunb.).

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.26 no.1
• /
• pp.56-68
• /
• 1981

A maize line was selected in 1979 among 1000 Korean local maize lines collected in 1977. The selected maize line was characterized by having three to four tillers and eight to 10 ears on each individual plant. The line was assumed to have a great potential as a silage crop. The investigation was conducted as one of the serial studies on the Korean maize collected lines to provide basic information on the genetic variabilities of the multi-eared and tillered (MET) line and on other agronomic characters, prior to use the line as material for future breeding works for silage crop. The MET line and Suwon #19, single cross hybrid, as check variety were planted on May 1, 15 and 30, in three different levels of plant populations. The results obtained were summarized as follows: 1. The genetic variabilities of multi-ear and tillering habits were greater than environmental variabilities. 2. Total dry leaf weight of individual plant of MET line was also significantly higher than that of Suwon #19. 3. The mean number of tillers and ears bearing on the individual plant of MET line varied greatly with plant densities. The number of tillers and ears was on the average 2.9 and 7.0, respectively, when planted in 60cm. by 60cm. 4. The total dry matter and dried stem weight of the individual plant on MET line were comparable to those of Suwon #19. 5. The kernel weight from the individual plant of MET line was 5 to 40% less than that of Suwon #19, depending upon the plant densities. 6. The Kernel to stover ratio was higher for Suwon #19 than for the MET line. (41% to 35%). 7. The MET line had shown first tiller two weeks after planted on May 1. The second and third tillers appeared three to five days after the appearance of the first tiller. 8. The MET line was very specific in tillering habits. All the tillers were borne on the first few nodes of main stem below the soil surface. 9. The tillering habits of MET line were vigorous in the early part of the growing season, but less vigorous in the later part of the growing season. The number of efficient tillers bearing useable ears, was around two to three, when planted in 60cm. by 60cm. 10. The difference of plant height between main stem and first few tillers was around 10cm. 11. The ear size of MET line was around one-third of the major corn belt hybrids. The shape of ear of MET line was conical, with different diameter. 12. The kernel of the MET line was flinty with small soft starch patches on the endosperm part. 13. The 100 kernel weight was around 15gr., which is about one half of the major high yielding hybrids. 14. The ear height of MET line was comparatively higher than that of Suwon #19. 15. Significantly high and positive phenotypic correlation coefficients were obtained among major plant characters. 16. The growth rate of MET line was slower than that of Suwon #19. 17. MET line and Suwon #19 were both heavily infected with black streaked mosaic virus.