• Korean Journal of Remote Sensing
• /
• v.37 no.6_3
• /
• pp.1965-1974
• /
• 2021

Satellite remote sensing approach can be actively used for forest monitoring. Especially, it is much meaningful to utilize Korea multi-purpose satellites, an independently operated satellite in Korea, for forest monitoring of Korea, Recently, several studies have been performed to exploit meaningful information from satellite remote sensed data via machine learning approaches. The forest information produced through machine learning approaches can be used to support the efficiency of traditional forest monitoring methods, such as in-situ survey or qualitative analysis of aerial image. The performance of machine learning approaches is greatly depending on the characteristics of study area and data. Thus, it is very important to survey the best model among the various machine learning models. In this study, the performance of deep neural network to classify artificial or natural forests was analyzed in Samcheok, Korea. As a result, the pixel accuracy was about 0.857. F1 scores for natural and artificial forests were about 0.917 and 0.433 respectively. The F1 score of artificial forest was low. However, we can find that the artificial and natural forest classification performance improvement of about 0.06 and 0.10 in F1 scores, compared to the results from single layered sigmoid artificial neural network. Based on these results, it is necessary to find a more appropriate model for the forest type classification by applying additional models based on a convolutional neural network.

• The Journal of the Korea Contents Association
• /
• v.12 no.8
• /
• pp.1-12
• /
• 2012

We develop the Spatio-Temporal Graph to imbue the historical context to the situations in a virtual world, and an ontology to enable a structural description of their elements such as the objects, relationships, and activities. In the time dimension the graph models all the temporal phases of the future besides the past and present in a comprehensive manner, and all the spatial aspects in an intuitive but efficient fashion. The overall architecture composing the Physical Layer, Logical Layer and Conceptual Layer which are integrated according to their interrelations allows events occurring in their corresponding worlds to be simulated in historical context. The S-T Graph could be used both to simulate the situations in the virtual world and to realize the knowledge systems of the virtual inhabitants to be used in judging and evaluating those situations. By adding temporal changes to the multi-layered architecture of our virtual world, this model lays a foundation for maximizing the diversity of situations in the simulation of a virtual world.

• Journal of Digital Convergence
• /
• v.12 no.5
• /
• pp.395-401
• /
• 2014

As social network service becomes common, the consumers use many discount coupons with which they can purchase goods via social commerce. Although, the quantities of coupons offered from social commerce are currently on the sharp increase, customized coupon service that reflects user preference is not offered. This paper proposes a coupon service method reflecting user's subjective inclination targeting food coupons to offer customized coupon service for social commerce. Towards this end, this paper conducts hierarchization of the factors that become standard in selecting coupons including food types, food prices, discount rates and the number of buyers. And then, this study classifies, extracts and offers the coupons using Fuzzy-AHP, a decision making support method that reflects subjective inclination. From the user satisfaction results on the extracted coupons, the users are generally satisfied: very satisfactory with 45%, satisfactory with 33% and fair with 22%, and there was no experiment participant, who was dissatisfied.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.98.2-98.2
• /
• 2012

We firstly present the unified Far-UV continuum map of the Taurus-Auriga-Perseus (TPA) complex, one of the largest local associations of dark cloud located in (l, b)=([154,180], [-28, -2]), by merging both FIMS and GALEX. The FUV continuum map shows that dust extinction correlate well with the FUV around the complex. It shows strong absorption in FUV toward the dense Taurus cloud while it does not in California cloud. It turned out that it is related to the relative location of each cloud and Perseus OB2 association. We also present some results of dust scattering simulation based on Monte Carlo Radiative Transfer technique (MCRT). Through this dust scattering simulation, we have derived the scattering parameter for this region, albedo(a)=$0.42^{+0.05}{_{-0.05}}$, asymmetry factor(g)=$0.47^{+0.11}{_{-0.27}}$. The optical parameters we obtained seem reasonable compared to the theoretical model values ~0.40 and ~0.65 for the albedo and the phase function though the phase function is rather small. Using the result of simulation, we figured out the geometries of each cloud in the complex region, especially their distances and thicknesses. Our predictions from the results are in good agreement with the previous studies related to the TPA complex. For example, the Taurus cloud is within ~200pc from the Sun and the Perseus seems to be multi-layered, at least two. The California cloud is more distant than the other cloud on average at ~350 pc and Auriga cloud seems to be between the Taurus cloud and the eastern end of the California cloud. We figured out that across the TPA complex region, there might be some correlation between the LSR velocity and the distance to each cloud in the complex.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.6
• /
• pp.511-520
• /
• 2000

Ultrasonic pulse echo method comes to be difficult to apply to the multi-layered structure with very thin layer, because the echoes from the top and the bottom of the layer are superimposed. We can easily meet this problem when the silicon chip layer in the semiconductor is inspected by a SAM equipment using fairly low frequency lower than 20MHz by which severe attenuation in the epoxy mold compound of packaging material can be overcome. Conventionally, deconvolution technique has been used for the decomposition of superimposed UT signals, however it has disabilities when the waveform of the transmitted signal is distorted according to the propagation. In this paper, the wavelet transform based deconvolution(WTBD) technique is proposed as a new signal processing method that can decompose the superimposed echo signals with superior performances compared to the conventional deconvolution technique. WTBD method uses the wavelet transform in the pre-stage of deconvolution to extract out the common waveform from the transmitted and received signal with distortion. Performances of the proposed method we shown by through computer simulations using model signal with noise and we demonstrated by through experiments for the fabricated semiconductor sample with partial delamination at the top of silicon chip layer.

• Journal of the Korean GEO-environmental Society
• /
• v.6 no.1
• /
• pp.53-62
• /
• 2005

This paper estimates the long-term settlement of Kimpo metropolitan landfill based on measured settlement data from 180 landfill monitors accumulated over a period of 12 years. Comparison of domestic and international settlement records indicate that the domestic compression rate is slightly lower due to greater portion of organic component. Several existing settlement models are used to compare with the observed behavior and also to estimate long-term settlement. The hyperbolic, Gibson & Lo, Bjarngard & Edgers and Power Creep Law models compare well with the measured settlement of the Kimpo metropolitan landfill. The settlement models are further used to estimate long-term settlement. Bjarngard & Edgers and Power Creep Law models result in higher estimates of the long-term settlement compared to the hyperbolic and Gibson & Lo models. Further comparisons indicate that other models, including Sowers and log models, are inapproriate for predicting the long-term settlement of the Kimpo metropolitan landfill.

• Journal of the Microelectronics and Packaging Society
• /
• v.25 no.4
• /
• pp.59-66
• /
• 2018

In this paper, we analyzed the usefulness of single-structured printed circuit board (PCB) modeling by using numerical analysis to model the PCB structure applied to a package for semiconductor purposes and applying modeling assuming a single structure. PCBs with circuit layer of 3rd and 4th were used for analysis. In addition, measurements were made on actual products to obtain material characteristics of a single structure PCB. The analysis results showed that if the PCB was modeled in a single structure compared to a multi-layered structure, the warpage analysis results resulting from modeling the PCB structure would increase and there would be a significant difference. In addition, as the circuit layer of the PCB increased, the mechanical properties of the PCB, the elastic coefficient and inertia moment of the PCB increased, decreasing the package's warpage.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.8
• /
• pp.1205-1212
• /
• 2022

Cyber threat targeting ICS (Industrial Control System) has indicated drastic increases over the past decade and Cyber Incident in Critical Infrastructure such as Energy, Gas Terminal and Petrochemical industries can lead to disaster-level accidents including casualties and large-scale fires. In order to effectively respond to cyber attacks targeting ICS, a multi-layered defense-in-depth strategy considering Control System Architecture is necessary. In particular, the centralized security log system integrating OT (Operational Technology) and IT (Information Technology) plays an important role in the ICS incident response plan. The paper suggests the way of implementing centralized security log system that collects security events and logs using OPC Protocol from Level 0 to Level 5 based on IEC62443 Purdue Model to integrate ICS security logs with SIEM (Security Information Event Management) operated in IT environment.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.5D
• /
• pp.505-512
• /
• 2010

Generally, the repeated traffic loading condition should be considered to predict the long-term deformation on road foundations or foundation systems. However, it is not easy to estimate long-term deformation on multi-layered system like roads and railways. For more quantitative analysis, mechanistic-empirical approach requires proper analytical tool, material's model, and material properties of foundation geomaterials under both traffic and environmental loadings. In this study, therefore, laboratory data from the long-term repeated load triaxial tests were used to predict accumulated deformation on pavement foundations and the results were analyzed based on the nonlinear models and stress state considered. All these results are presented and verified on laboratory based scale using the finite element analysis with the deformation characteristics of foundation geomaterials at various stress states.

• ETRI Journal
• /
• v.45 no.5
• /
• pp.910-921
• /
• 2023

In this study, we designed a 6T-SRAM cell using 16-nm CMOS process and analyzed the performance in terms of read-speed latency. The temperaturedependent Cu and multilayered graphene nanoribbon (MLGNR)-based nanointerconnect materials is used throughout the circuit (primarily bit/bit-bars [red lines] and word lines [write lines]). Here, the read speed analysis is performed with four different chip operating temperatures (150K, 250K, 350K, and 450K) using both Cu and graphene nanoribbon (GNR) nano-interconnects with different interconnect lengths (from 10 ㎛ to 100 ㎛), for reading-0 and reading-1 operations. To execute the reading operation, the CMOS technology, that is, the16-nm PTM-HPC model, and the16-nm interconnect technology, that is, ITRS-13, are used in this application. The complete design is simulated using TSPICE simulation tools (by Mentor Graphics). The read speed latency increases rapidly as interconnect length increases for both Cu and GNR interconnects. However, the Cu interconnect has three to six times more latency than the GNR. In addition, we observe that the reading speed latency for the GNR interconnect is ~10.29 ns for wide temperature variations (150K to 450K), whereas the reading speed latency for the Cu interconnect varies between ~32 ns and 65 ns for the same temperature ranges. The above analysis is useful for the design of next generation, high-speed memories using different nano-interconnect materials.