• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.1C
• /
• pp.1-7
• /
• 2011

Recently, multi-hop relay transmission has drawn much attention owing to its advantage of coverage extension at low power consumption. In this paper, we derive a performance bound of multi-hop communication systems with multiple amplify-and-forward relays when the optimal path is selected. The bound is derived in generalized Nakagami fading channels with different parameters for each hop by applying the geometric mean bound to the path signal-to-noise ratio (SNR) and obtaining the moment generation function of the bound. It is shown that the bound based on the geometric mean is closer to the actual performance of optimal path selection when the fading effect is small.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.4
• /
• pp.17-22
• /
• 2013

In this paper, we propose a multi-hop cooperative transmission protocol over Rayleigh fading channels. In the proposed protocol, the multi-hop cooperative transmission is used to improve the system performance. Due to broadcast nature, we do not limit the receiving node to be only the next node, but the destination and all the nodes between the transmitting node and the destination. The proposed protocol can hence save the average transmit power, compared with multi-hop direct transmission protocol due to the skipped transmissions from some intermediate nodes or chosen relays. The proposed scheme is implemented and evaluated in mobile ad-hoc wireless networks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.7B
• /
• pp.567-574
• /
• 2008

In this paper, we propose an optimal coverage extension scheme in the OFDMA based mobile multi-hop relay system. First, we propose an optimal frequency and time assignment scheme for maximizing system throughput and analyze the frame efficiency of schemes. Then, under the given BS capacity, we find the maximum number of relay hops that can be used to estimate the maximum coverage area of a BS in a multi-hop relay system. Analytical results show that the proposed scheme is efficient in coverage extension and throughput maximization in OFDMA based multi-hop relay system. Our work may be a rough guideline to control the parameters for multi-hop relay system optimization.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.5B
• /
• pp.327-337
• /
• 2012

There have been lots of researches on the optimal relay selection in relay-based systems. However, most researches have been focused on the maximization of transmission capacity with a constraint of sum power at both transmitter and relays. In Ad-hoc networks where relays have batteries of limited power, it is imperative to minimize the energy consumption while maintaining the required quality-of-service (QoS). In this paper, we propose an optimal relay selection strategy to minimize the relay power consumption while satisfying the required signal-to-noise ratio (SNR). Through intensive simulations, we show the proposed method is more effective in terms of energy consumption and guarantee lower transmission failure probability in multi-hop Ad-hoc environments.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.2
• /
• pp.670-683
• /
• 2016

Network coding, as a new technique to improve the throughput, is studied combined with multi-relay model in this paper to address the challenges of long distance and power limit in deep space communication. First, an amplify-and-forward relaying approach based on analog network coding (AFNC) is proposed in multi-relay network to improve the capacity for deep space communication system, where multiple relays are introduced to overcome the long distance link loss. The design of amplification coefficients is mathematically formulated as the optimization problem of maximizing SNR under sum-power constraint over relays. Then for a dual-hop relay network with a single source, the optimal amplification coefficients are derived when the multiple relays introduce non-coherent noise. Through theoretic analysis and simulation, it is shown that our approach can achieve the maximum transmission rate and perform better over single link transmission for deep space communication.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.7C
• /
• pp.592-600
• /
• 2012

In this paper, we proposed that decentralized frequency allocation scheme(DFAS) without network entry procedure between relays in mobile relay system. Frequency Indicator(FI) signal which is the reference signal of frequency division of each relay and Energy Detection(ED) region are defined. In addition, the mobile connected to the relay transmits the FI signal to neighbor relays in order to facilitate communication between relays. Finally, by using this scheme, the cell throughput improvement is confirmed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.10B
• /
• pp.911-918
• /
• 2008

In this paper, we propose new cell structures using multi-hop Relay Station(RS) based on IEEE802.16j in Narrow-Beam Trisector Cell (NBTC) and Wide-Beam Trisector Cell (WBTC), which are two methods for cell sectorization using 3-sector directional antennas. Then, we analyze our proposed structures compared with the existing system which does not use any RS about the numbers of optimized Base Station (BS) and multi-hop relay, the extended BS coverage, and the deployment cost according to the traffic density using optimization model. According to the results, we know the reduction of total deployment cost of the proposed systems and that WBTC is suitable when the traffic density is high and NBTC is suitable when the traffic density is low in our proposed multi-hop based NBTC and WBTC structures.

• Journal of Communications and Networks
• /
• v.12 no.2
• /
• pp.103-113
• /
• 2010

In this paper, a tradeoff between the total energy consumption-per-bit and the end-to-end rate under spatial reuse in wireless multi-hop network is developed and analyzed. The end-to-end rate of the network is the number of information bits transmitted (end-to-end) per channel use by any node in the network that is forwarding the data. In order to increase the bandwidth efficiency, spatial reuse is considered whereby simultaneous relay transmissions are allowed provided there is a minimum separation between such transmitters. The total energy consumption-per-bit includes the energy transmitted and the energy consumed by the receiver to process (demodulate and decoder) the received signal. The total energy consumption-per-bit is normalized by the distance between a source-destination pair in order to be consistent with a direct (single-hop) communication network. Lower bounds on this energy-bandwidth tradeoff are analyzed using convex optimization methods. For a given location of relays, it is shown that the total energy consumption-per-bit is minimized by optimally selecting the end-to-end rate. It is also demonstrated that spatial reuse can improve the bandwidth efficiency for a given total energy consumption-per-bit. However, at the rate that minimizes the total energy consumption-per-bit, spatial reuse does not provide lower energy consumption-per-bit compared to the case without spatial reuse. This is because spatial reuse requires more receiver energy consumption at a given end-to-end rate. Such degraded energy efficiency can be compensated by varying the minimum separation of hops between simultaneous transmitters. In the case of equi-spaced relays, analytical results for the energy-bandwidth tradeoff are provided and it is shown that the minimum energy consumption-per-bit decreases linearly with the end-to-end distance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.9C
• /
• pp.887-895
• /
• 2009

This paper proposes a cooperative power allocation with the use of partial channel information (e.g., the average signal-to-noise ratio (SNR) and transmit correlation) in multi-cell dual-hop multi-input single-output (MISO) relay systems. In a dual-hop MISO relay channel, it is desirable to allocate the transmit power between dual-hop links to maximize the end-to-end capacity. We consider the maximization of the end-to-end capacity of a dual-hop MISO relay channel under sum-power constraint. The proposed scheme adaptively allocates the transmit power considering the average channel gain of the target relay and the transmit correlation of the desired and inter-relay interference channel from adjacent relays. It is shown by means of upper-bound analysis that the end-to-end capacity can be maximized by making the angle difference of the principal eigenvectors of the desired and inter-relay interference channel orthogonal in highly-correlated channel environments. Finally, the performance of the proposed scheme is verified by computer simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.3B
• /
• pp.304-310
• /
• 2009

In this paper, we evaluate the performance of VoIP in OFDMA-based relay systems with various capabilities of relays. We classify relays according to capability as "mid-capability (MC)" and "high-capability (HC)" relay. In system with HC relays, not only base station (BS) but also relay station (RS) performs scheduling at its ova whereas only BS performs scheduling in system with MC relays using the information reported by MS (i.e. the received signal-to-interference-plus-noise ratio (SINR) of mobile station (HS), the amount of MS traffic, etc). In system with MC relays, the controling overhead of BS is larger than that of system with HC relays. However, since BS has all MS information, efficient resource allocation and scheduling is possible. We derived the "average packet delay," "good packet ratio," and "cell goodput" in a VoIP environment. The simulation results demonstrate that the system with MC relays has better VoIP performance over that with HC relays.