• 말소리와 음성과학
• /
• 제7권4호
• /
• pp.85-92
• /
• 2015

This study aimed to establish characteristics related to voice and speech through the natural base frequency analysis of esophagus vocalization. In the study, 8 subjects were selected for esophagus vocals, and 10 other subjects were selected for a control group. MDVP(Multi-dimensional Voice Program, Model 4800, USA, 2001), Multi Speech(Model 3700, Kaypantax, USA, 2008) were used as experiment equipment. The speech samples selected for evaluation were vowels and sentences (both declarative and interrogative). For acoustic analysis, the intonation form of fo, jitter, energy, shimmer, HNR, and intonation patterns of the speech sample were measured. The results were as follows: First, the natural intrinsic frequency of extended vowels in the esophagus vocal group was lower than the frequency in the normal vocal group. In particular, the intrinsic frequency difference for high vowel /i/ was much greater than the frequency difference for low vowel /a/. Second, the jitter values of the esophagus vocal group were higher than the control group. In particular, there was a large difference between the jitter values for /a/ and /i/, with the jitter values being highest for /i/. Third, there was no significant difference in vocal strength between the esophagus vocal patient group and the control group. Fourth, the shimmer values of the voices in the esophagus vocal group were higher than shimmer values in the control group. In particular, there was a large difference in shimmer values for low vowel /a/. Fifth, the HNR values of the esophagus vocal group were showed significantly lower than the control group. In particular, the largest difference in HNR values between the two groups was for high vowel /i/. Sixth, the pitch contours of interrogative and declarative sentences of the esophagus vocal patient group showed a different form or only had with small differences compared to the pitch contours of the normal vocal group, thus presenting an inconsistent pattern.

• 복식문화연구
• /
• 제29권4호
• /
• pp.603-615
• /
• 2021

The aim of this study was to analyze the semantic network structure of keywords and the visual composition of images extracted from Instagram in relation to the multi-persona phenomenon with in fashion imagery, which has recently been attracting attention. To this end, the concept of a 'secondary character', which forms a separate identity from a 'main character' on various social media platforms as well as on the airwaves, was considered as the spread of multi-persona and #SecondaryCharacter on Instagram was investigated. 3,801 keywords were collected after crawling the data using Python and morphological analysis was undertaken using KoNLP. The semantic network structure was then examined by conducting a CONCOR analysis using UCINET and Netdraw to determine the top 50 keywords. The results were then classified into a total of 6 clusters. In accordance with the meaning and context of the keywords included in each cluster, group names were assigned : virtual characters, relationship with the main character, hobbies, daily record, N-job person, media and marketing. Image analysis considered the technical, compositional, and social styles of the media based on Gillian Rose's visual analysis method. The results determined that Instagram uses fashion images that virtualize one's face to produce multi-persona representation s that show various occupations, describe different types of hobbies, and depict situations pertaining to various social roles.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2007년도 추계학술대회 및 정기총회
• /
• pp.121-129
• /
• 2007

Recently a multi-attribute structure analysis method is one of the evident areas of important points in the decision support system analysis. This research developed an internet/intranet-based solution builder for a three-step decision support system using fuzzy-AHP in the view of 1) brainstorming far the idea generation, 2) fuzzy-AHP (fuzzy analytic hierarchy process) as a multi-attribute structured analysis method and 3) aggregation logic model to integrate the results of individual analysis. We applied this decision support system to the make-or-buy decision problem for school foodservice system considering the multi-attributes in the decision making. A computer program is developed and demonstrated it internet/intranet-based decision problem. It was known that this solution builder provides decision makers a good tool for mate-of-buy group decision making.

• 농업과학연구
• /
• 제45권4호
• /
• pp.575-582
• /
• 2018

Bacterial fruit blotch (BFB) caused by Acidovorax citrulli is a devastating disease found in many cucurbits cultivation fields. The genetic diversity for 29 strains of A. citrulli collected from various cucurbits in South Korea was determined by DNA fingerprinting with a pathogenicity test, multi locus analysis, Rep-PCR (repetitive sequence polymerase chain reaction), and URP (universal rice primers) PCR bands. Two distinct groups (Korean Clonal Complex, KCC1 and KCC2) in the population were identified based on group specific genetic variation in the multi locus phylogeny using six conserved loci and showed a very high similarity with DNA sequences for representative foreign groups [the group I (CC1-1 type) and the group II (CC2-5 type)] widely distributed worldwide, respectively. Additionally, in the case of phaC, a new genotype was found within each Korean group. The KCC1 was more heterogeneous compared to the KCC2. The KCC1 recovered mainly from melons and watermelons (ratio of 6 : 3) and 15 of the 20 KCC2 strains recovered from watermelons were dominant in the pathogen population. Accordingly, this study found that two distinct groups of differentiated A. citrulli exist in South Korea, genetically very similar to representative foreign groups, with a new genotype in each group resulting in their genetic diversity.

• 임상간호연구
• /
• 제17권2호
• /
• pp.150-162
• /
• 2011

Purpose: Multi-drug resistant (MR) infections among intensive care unit (ICU) patients with oral intubation and a ventilator are serious nosocomial infections. This study was done to compare the effects of oral care and ventilator circuit on reduction of MR infections. Methods: A total of 92 participants were recruited from an ICU at C University Hospital in G-city, Korea, assigned to one of 4 groups and evaluated: group I received oral care with sponge and reusable circuit; group II received oral care with tooth brush and reusable circuit; group III received oral care with sponge and disposable circuit; group IV received oral care with tooth brush and disposable circuit. Results: Prevalence rate of MR infections was highest in group I (47.8%), followed by group II (30.4%), group IV (19.0%), and group III (13.6%). Of the four groups, group III showed a significantly decreased MR infections (p=.035) and higher possibility of survival rate as time passes according to survival analysis (p=.019). Conclusion: Results of this study indicate that using disposable ventilator circuit significantly decreases MR infections and raises the possibility of a higher survival rate as time passes. According to this study, the use of disposable ventilator circuit is useful in prevention of MR infections.

• 대한환경공학회지
• /
• 제31권6호
• /
• pp.442-448
• /
• 2009

예혼합 분무화염의 유적군 연소 기구를 평가하기 위하여 레이저 가시화법, MICRO (multi-color integrated Cassegrain receiving optics) 및 PDA (phase Doppler anemometer) 광학계측 시스템을 이용하여 동시 시계열 계측을 실시하였다. 또한 유적군의 군연소수를 실험적으로 산출하여 이론해석에 적용하였을 경우 실제로 관찰되는 군연소 형태와 일치하는지에 대하여 검토하였다. 유적군 단면화상에 의해 확인된 모든 유적군에 대하여 실험적으로 군연소수 $G_c$를 산출한 결과 주로 내부 군연소와 외부 군연소로 분류되었으며 이론해석과 일치하였다. 또한 실제 관찰된 군연소 형태와 그 유적군의 군연소수를 이론해석에 적용한 경우에 군연소 형태가 일치하는 경우와 일치하지 않는 경우가 있었다. 일치하지 않는 원인은 군연소수를 유적의 기하학적 배치만으로 결정한 것이나 현상의 3차원성이 측정 결과에 영향을 미친 것이라고 생각되어진다.

• Nuclear Engineering and Technology
• /
• 제50권1호
• /
• pp.35-42
• /
• 2018

This article presents clean core criticality calculations and control rod worth calculations for TRIGA (Training, Research, Isotope production-General Atomics) Mark II research reactor benchmark cores using Winfrith Improved Multi-group Scheme-D/4 (WIMS-D/4) and Program for Reactor In-core Analysis using Diffusion Equation (PRIDE) codes. Cores 133 and 134 were analyzed in 2-D (r, ${\theta}$) and 3-D (r, ${\theta}$, z), using WIMS-D/4 and PRIDE codes. Moreover, the influence of cross-section data was also studied using various libraries based on Evaluated Nuclear Data File (ENDF/B-VI.8 and VII.0), Joint Evaluated Fission and Fusion File (JEFF-3.1), Japanese Evaluated Nuclear Data Library (JENDL-3.2), and Joint Evaluated File (JEF-2.2) nuclear data. The simulation results showed that the multiplication factor calculated for all these data libraries is within 1% of the experimental results. The reactivity worth of the control rods of core 134 was also calculated with different homogenization approaches. A comparison was made with experimental and reported Monte Carlo results, and it was found that, using proper homogenization of absorber regions and surrounding fuel regions, the results obtained with PRIDE code are significantly improved.

• Clinics in Orthopedic Surgery
• /
• 제10권4호
• /
• pp.484-490
• /
• 2018

Background: The use of three-dimensional multi-segment foot models (3D MFMs) is increasing since they have superior ability to illustrate the effect of foot and ankle pathologies on intersegmental motion of the foot compared to single-segment foot model gait analysis. However, validation of the repeatability of the 3D MFMs is important for their clinical use. Although many MFMs have been validated in normal adults, research on MFM repeatability in children is lacking. The purpose of this study is to validate the intrasession, intersession, and interrater repeatability of an MFM with a 15-marker set (DuPont foot model) in healthy children. Methods: The study included 20 feet of 20 healthy children (10 boys and 10 girls). We divided the participants into two groups of 10 each. One group was tested by the same operator in each test (intersession analysis), while the other group was tested by a different operator in each test (interrater analysis). The multiple correlation coefficient (CMC) and intraclass correlation coefficient (ICC) were calculated to assess repeatability. The difference between the two sessions of each group was assessed at each time point of gait cycle. Results: The intrasession CMC and ICC values of all parameters showed excellent or very good repeatability. The intersession CMC of many parameters showed good or better repeatability. Interrater CMC and ICC values were generally lower for all parameters than intrasession and intersession. The mean gaps of all parameters were generally similar to those of the previous study. Conclusions: We demonstrated that 3D MFM using a 15-marker set had high intrasession, intersession, and interrater repeatability in the assessment of foot motion in healthy children but recommend some caution in interpreting the hindfoot parameters.

• Journal of Information Processing Systems
• /
• 제12권4호
• /
• pp.724-740
• /
• 2016

The performance issues of screening large database compounds and multiple query compounds in virtual screening highlight a common concern in Chemoinformatics applications. This study investigates these problems by choosing group fusion as a pilot model and presents efficient parallel solutions in parallel platforms, specifically, the multi-core architecture of CPU and many-core architecture of graphical processing unit (GPU). A study of sequential group fusion and a proposed design of parallel CUDA group fusion are presented in this paper. The design involves solving two important stages of group fusion, namely, similarity search and fusion (MAX rule), while addressing embarrassingly parallel and parallel reduction models. The sequential, optimized sequential and parallel OpenMP of group fusion were implemented and evaluated. The outcome of the analysis from these three different design approaches influenced the design of parallel CUDA version in order to optimize and achieve high computation intensity. The proposed parallel CUDA performed better than sequential and parallel OpenMP in terms of both execution time and speedup. The parallel CUDA was 5-10x faster than sequential and parallel OpenMP as both similarity search and fusion MAX stages had been CUDA-optimized.

• 한국레이저가공학회지
• /
• 제14권3호
• /
• pp.7-11
• /
• 2011

As an active emission display using emissive polymer has had much attention recently, needs for a selective patterning of emissive layer for those displays have been increased abruptly. Therefore, the various laser sources in terms of its wavelength has been used for laser direct patterning. In this work, the feasibility of those processes is examined using numerical analysis and the experimental investigation. A sample has multi-layered structure, emissive polymer on aluminum which is deposited on a glass substrate. Key factors for optimizing the laser patterning of the emissive polymer are considered into the control of ablation products, large-sized particle, and the choice of the appropriate wavelength for minimizing the heat affected zone and the remnant layer.