• Smart Structures and Systems
• /
• v.20 no.2
• /
• pp.151-162
• /
• 2017

In practical engineering, the friction damper is a widely used energy dissipation device because of its large deformation capacity, stable energy dissipation capability, and cost effectiveness. While based on conventional friction dampers, the double-sliding friction damper (DSFD) being proposed is different in that it features two sliding friction forces, i.e., small and large sliding friction forces, rather than a single-sliding friction force of ordinary friction dampers. The DSFD starts to deform when the force sustained exceeds the small-sliding friction force, and stops deforming when the deformation reaches a certain value. If the force sustained exceeds the large sliding friction force, it continues to deform. Such a double-sliding behavior is expected to endow structures equipped with the DSFD better performance in both small and large earthquakes. The configuration and working mechanism of the DSFD is described and analyzed. Quasi-static loading tests and finite element analyses were conducted to investigate its hysteretic behavior. Finally, time history analysis of the single-degree-of-freedom (SDOF) and multi-degree-of-freedom (MDOF) systems were performed to investigate the seismic performance of DSFD-equipped structures. For the purpose of comparison, tests on systems equipped with conventional friction dampers were also performed. The proposed DSFD can be realized perfectly, and the DSFD-equipped structures provide better performances than those equipped with conventional friction dampers in terms of interstory drift and floor acceleration. In particular, for the MDOF system, the DSFD helps the structural system to have a uniform distributed interstory drift.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.1
• /
• pp.255-259
• /
• 2016

Background: Reliable and validated instruments are needed in order to study the quality of life in myeloma patients. This study aimed to translate and explore the psychometric properties of the European Organisation for Research and Treatment of Cancer (EORTC) myeloma module (QLQ-MY20) in Iranian patients. Materials and Methods: Two hundred and fifteen patients with multiple myeloma (MM) were recruited from Imam Khomeini Hospital, Tehran. A standard forward-backward translation procedure was implemented. Participating patients were asked to complete the EORTC QLQ-C30 and the QLQ-MY20 three times, at study entry, after two weeks, and again after three months. Data were tested for the range of measurement, internal consistency, test-retest reliability, known group comparison, responsiveness and factor structure. Results: Mean age of the patients was 60.7 years. No floor and ceiling effects were seen for the QLQ-MY20. Cronbach's ${\alpha}$ was greater than 0.80 for all three multi-item scales (ranging from 0.82 to 0.93). All four scales had test-retest reliability of 0.85 or greater. Results of the confirmatory factor analysis that the hypothesized 3-scale measurement model of the QLQ-MY20. Moreover, the Persian version for the QLQ-MY20 differentiated between subgroups of the patients in terms of beta-2 microglobulin, fracture and performance status. The responsiveness of the QLQ-MY20 to change over time was confirmed within 3 months. Conclusions: the results of our study indicate that our Iranian version of the QLQ-MY20 is a feasible, reliable and valid questionnaire for assessing the condition-specific quality of life of patients with MM.

• Journal of computational fluids engineering
• /
• v.21 no.3
• /
• pp.15-23
• /
• 2016

In the present study, two phase flows around a projectile vertically launched from an underwater platform have been numerically investigated by using a three dimensional multi-phase RANS flow solver based on pseudo-compressibility and a homogeneous mixture model on unstructured meshes. The relative motion between the platform and projectile was described by six degrees of freedom equations of motion with Euler angles and a chimera technique. The propulsive power of the projectile was modeled as the fluid force acting on the lower surface of the body by the compressed air emitted from the underwater platform. Various flow conditions were considered to analyze the fluid-dynamics motion parameters of the projectile. The water level of platform and the current speed around the projectile were the main parametric variables. The numerical calculations were conducted up to 0.75sec in physical time scale. The dynamics tendency of the projectile was almost identical with respect to the water level variation due to the constant buoyancy term. The moving speed of the projectile along the vertical axis inside the platform decreased when the current speed increased. This is because the inflow from outside of the platform impeded development of the compressed air emitted from the floor surface of the launch platform. As a result, the fluid force acting on the lower surface of the projectile decreased, and injection time of the projectile from the platform was delayed.

• The Journal of Information Systems
• /
• v.12 no.2
• /
• pp.57-72
• /
• 2003

The purpose of this paper is to propose the modeling of multiagent based SCM and implement the prototype in the Internet environment. SCM process follows the supply chain operations reference (SCOR) model which has been suggested by Supply Chain Counsil. SCOR model has been positioned to become the industry standard for describing and improving operational process in SCM. Five basic processes, plan, source, matte, deliver and return are defined in the SCOR model, through which a company establishes its supply chain competitive objectives. A supply chain is a world wide network of suppliers, factories, warehouses, distribution centers and retailers through which raw materials are acquired, transformed or manufactured and delivered to customers by autonomous or semiautonomous process. With the pressure from the higher standard of customer compliance, a frequent model change, product complexity and globalization, the combination of supply chain process with an advanced infrastructure in terms of multiagent systems have been highly required. Since SCM is fundamentally concerned with coherence among multiple decision makers, a multiagent framework based on explicit communication between constituent agents such as suppliers, manufacturers, and distributors is a natural choice. Multiagent framework is defined to perform different activities within a supply chain. Dynamic and changing functions of supply chain can be dealt with multi-agent by cooperating with other agents. In the areas of inventory management, remote diagnostics, communications with field workers, order fulfillment including tracking and monitoring, stock visibility, real-time shop floor data collection, asset tracking and warehousing, customer-centric supply chain can be applied and implemented utilizing multiagent. In this paper, for the order processing event between the buyer and seller relationship, multiagent were defined corresponding to the SCOR process. A prototype system was developed and implemented on the actual TCP/IP environment for the purchase order processing event. The implementation result assures that multiagent based SCM enhances the speed, visibility, proactiveness and responsiveness of activities in the supply chain.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.1A
• /
• pp.17-24
• /
• 2012

In this paper, we described a received signal model in terms of the starting point of FFT window and derive a post-detection SINR for the receiver with MMSE filter and the corresponding filter coefficients in order to mitigate the effects of interferences caused by time and frequency selective fading channels and time difference of arrival (TDoA) in OFDMA-based Mesh Networks. In addition, we proposed an MMSE Bidirectional Successive Detection (BSD) technique which can suppress the effects of interferences among multi-nodes without any redundant FFT operations. It was shown by simulation that the proposed interference suppression technique has not an error floor at higher average SNR than 30dB in terms of 64QAM uncoded BER contrary to the conventional techniques.

• Journal of the Korea Safety Management & Science
• /
• v.15 no.1
• /
• pp.31-40
• /
• 2013

For the matter of elevator, one of the multi-use facilities for unspecified public, the JIS has re-established and reformed to apply to the environment in South Korea for the past 20 years. In the aspect of safety assurance, it was inevitable to suggest improved measures. The government, Ministry of Public Administration and Security has secured the safety by enhancing the safety management functions in the elevator inspection standards and expanding its safety device measures. Further, the international inspection standard has been introduced, which is about unifying inspection standard system into the international standard code. In March 14th 2012, the international standard (EN) has been amended and fully announced. Escalator and passenger conveyor among lift devices have several common danger factor that cause safety accident. First, the accident caused by decreased braking power of brake. Second, the accident caused by the rate difference between handrail and tread-board. Third, the accident caused by defects of contraflow preventing device or carelessness inspection. Fourth, the accident caused by wet tread-board or wet floor of platform which makes passenger slip and fall. As the improvements to prevent and reduce these negligent accidents, the inspection list to check and methods should be subdivided and applied for each accident likelihood cause for safety management enhancement and safety assurance of existing escalator and passenger conveyors. The escalators and passenger conveyors without safety devices in existence should be obliged to modify the part of the system or install additional safety device. With making these measures obligations, it requires to improve the system to be suitable for the international inspection standard and to have measures to prevent safety accidents. It also needs to arrange improvements for skid accident of tread-board by the external environment factors such as snow and rain.

• Korean Institute of Interior Design Journal
• /
• v.21 no.6
• /
• pp.271-279
• /
• 2012

Among the community-based cultural facilities, public libraries are places for social and educational purpose that improve the education of the resident, the expansion of the basic cultural education, communication between the members of society, and the accumulations and preservations of the culture. Public libraries should be a local cultural facility that expresses the value of a community. This study aims to analyze the design expression of publicness in a public branch library as a community-based cultural space through the study of branch library in the U.S. This study focused on the most future-oriented and innovative Ten New Landmark Libraries in the United States selected by Library Journal magazine in 2011. Among the selected libraries, three branch libraries which belongs Arizona Maricopa County were included in the study. The results of this study are as follows. First, the sites of the branch libraries vary geographically, but the libraries increase accessibility are caused by unique appearances and design concept of intellectual interest. Second, the floor plan shows the separation of meeting rooms and faculty space from the public space and has visual and spatial open space by high ceiling of the reading room. Third, multi-functional public space for residents are meeting rooms, the external patios for reading, galleries, cafes, libraries-shops which provides a variety of cultural programs, activities, and the opportunity to socialize neighbors. Fourth, branch Libraries have unique designs that harmonizes with nearby places to reflect locality, giving the locals a sense of pride in their community. Fifth, concrete brick and metal panel were used as finishing material for the practicality of maintenance. In particular, transparent glass envelope allows the locals to stay for long time due to openness and brightness of space.

• Korean Institute of Interior Design Journal
• /
• v.26 no.6
• /
• pp.135-144
• /
• 2017

In addition to the well-known 'Frankfurt Kitchen', Austrian female architect Margarette $Sch{\ddot{u}}tte-Lihotzky^{\prime}s$ architectural achievements include a study on the housing for working class, contribution to the resident participation movement, the planning of multi-family housing complexes, rational floor plan design, and the design and study of interior spaces. The purpose of this study is to investigate how she, who played intermediate roles between an architect and a social reformer, reflected social issues and the demands of living on the housing plans in the Red Wien era and to discuss diverse issues of modern residential planning furthermore. In this study, first, the housing situation in Vienna immediately after World War I was grasped and the architectural and housing discourses at that time were examined. Thereafter, cases of $Sch{\ddot{u}}tte-Lihotzky^{\prime}s$ works were investigated and analyzed. In the period of transition to modern times, the concepts of residential planning of $Sch{\ddot{u}}tte-Lihotzky$, who began as a social democratic architect, often showed transitional tendencies in private and public functions of housing, spatial distribution for the daily life, and functions of modern family and home. However, thereafter, the paradigm of the rationalism-functionalism was already sprouting from her architectural and residential plans. In conclusion, it can be said that the works of $Sch{\ddot{u}}tte-Lihotzky$ has realized the social responsibility of residential planning and become a cornerstone of the later modern housing.

• Journal of the Korean Institute of Educational Facilities
• /
• v.24 no.6
• /
• pp.55-64
• /
• 2017

This study analyzes the common space of the high schools before and after the decade of 2009 which starts Subject-centered clusters school plan, and proposes the direction of common space planning for the future. Based on the floor plans of high schools awarded as excellent school facilities every year, first, types and numbers of common space, second, area ratio between common space and program space and also moving space and staying space, third, space connections were analyzed for tracking the change of the relationship between common, staying and program spaces. The study results demonstrated that types, numbers and area ratio of the common space were increased as the years go on. Especially, the area ratio of staying space was dramatically increased after 2009 and this result was caused by the home-base, alcove space, and hall that were adopted for subject-centered clusters planning after 2009. Connecting diagram of staying area and program spaces also shows the spaces related to staying area were changed from a classrooms and administrative office etc. to a library, gym, and seminar rooms etc. In case of staying area, it would have a value as a common space for various student activities such as group activities, meetings, and multi-uses. Because student activities would be changed and encouraged depending on the location, sizes and program spaces around staying area, it should be emphasized that the planning for staying area is critical for future school design.

• Journal of Families and Better Life
• /
• v.30 no.5
• /
• pp.29-47
• /
• 2012

The purpose of this research is to identify the everyday life culture, housing satisfaction and housing importance of older Korean-Chinese living in Harbin, China. Social survey research using the questionnaire was conducted from August to October in 2011. A total of 94 usable samples were analyzed by the SPSS version the 18.0 statistical program using frequency, percentage, cross-tabulation, factor analysis, and Pearson's correlation. The major findings were as follows. Firstly, older Chinese in Harbin were assimilated into Chinese culture such as national holidays and respectful people, but acculturated in terms of their daily food, and their preference to live in a Korean-Chinese village. Secondly, they had mainly lived in multi-story houses, the so called Chinese-style apartments. The average size of their living space was $80.33m^2$ and they were usually unsatisfied with their neighbors and floor treatment lacking Ondol(溫突). Thirdly, 5 factors affecting on housing value orientation were 'physical characteristics','emotional characteristics', 'economic characteristics', 'social characteristics', 'neighbor characteristics/reputation of the house' and they explained 73.9%. 2 factors affecting on housing satisfaction were 'inner complex/inner space' and 'neighborhood environment' and they explained 69.4%. In conclusion, some policy is needed for Korean Chinese living in Harbin for their well-being when it comes to their housing needs and conditions. Given the nature of big city, Harbin and its attraction, younger Korean-Chinese tend to be rapidly assimilated into Chinese culture. However older people in Harbin think that it is important for their children to learn both countries' languages and cultures in order to be successful, so some concrete policies and supports are needed.