• Asian Journal of Atmospheric Environment
• /
• v.2 no.1
• /
• pp.34-46
• /
• 2008

Emissions inputs for use in air quality modeling of Korea were generated with the emissions inventory data from the National Institute of Environmental Research (NIER), maintained under the Clean Air Policy Support System (CAPSS) database. Source Classification Codes (SCC) in the Korea emissions inventory were adapted to use with the U.S. EPA's Sparse Matrix Operator Kernel Emissions (SMOKE) by finding the best-matching SMOKE default SCCs for the chemical speciation and temporal allocation. A set of 19 surrogate spatial allocation factors for South Korea were developed utilizing the Multi-scale Integrated Modeling System (MIMS) Spatial Allocator and Korean GIS databases. The mobile and area source emissions data, after temporal allocation, show typical sinusoidal diurnal variations with high peaks during daytime, while point source emissions show weak diurnal variations. The model-ready emissions are speciated for the carbon bond version 4 (CB-4) chemical mechanism. Volatile organic carbon (VOC) emissions from painting related industries in area source category significantly contribute to TOL (Toluene) and XYL (Xylene) emissions. ETH (Ethylene) emissions are largely contributed from point industrial incineration facilities and various mobile sources. On the other hand, a large portion of OLE (Olefin) emissions are speciated from mobile sources in addition to those contributed by the polypropylene industry in point source. It was found that FORM (Formaldehyde) is mostly emitted from petroleum industry and heavy duty diesel vehicles. Chemical speciation of PM2.5 emissions shows that PEC (primary fine elemental carbon) and POA (primary fine organic aerosol) are the most abundant species from diesel and gasoline vehicles. To reduce uncertainties in processing the Korea emission inventory due to the mapping of Korean SCCs to those of U.S., it would be practical to develop and use domestic source profiles for the top 10 SCCs for area and point sources and top 5 SCCs for on-road mobile sources when VOC emissions from the sources are more than 90% of the total.

• International Journal of Quality Innovation
• /
• v.3 no.2
• /
• pp.113-131
• /
• 2002

The relationships among multi-dimensional data (such as medical examination data) with ambiguity and variation are difficult to explore. The traditional approach to building a data classification system requires the formulation of rules by which the input data can be analyzed. The formulation of such rules is very difficult with large sets of input data. This paper first describes two classification approaches using back-propagation (BP) neural network and Mahalanobis distance (MD) classifier, and then proposes two classification approaches for multi-dimensional feature selection. The first one proposed is a feature selection procedure from the trained back-propagation (BP) neural network. The basic idea of this procedure is to compare the multiplication weights between input and hidden layer and hidden and output layer. In order to simplify the structure, only the multiplication weights of large absolute values are used. The second approach is Mahalanobis-Taguchi system (MTS) originally suggested by Dr. Taguchi. The MTS performs Taguchi's fractional factorial design based on the Mahalanobis distance as a performance metric. We combine the automatic thresholding with MD: it can deal with a reduced model, which is the focus of this paper In this work, two case studies will be used as examples to compare and discuss the complete and reduced models employing BP neural network and MD classifier. The implementation results show that proposed approaches are effective and powerful for the classification.

• Journal of Korea Multimedia Society
• /
• v.18 no.7
• /
• pp.873-885
• /
• 2015

Today, It is difficult to search the various and numerous information efficiently. For this reason, Semantic Web emerged to provide searching services more easily through the structuring of a variety of unstructured format data and the definition of meaningful relationships between information. Especially, definition of relationship and meaning among resources is significant to share and infer related information. Ontology modeling plays just that role. Weapon parts development information is unstructured and dispersed all over. There are many difficulties in finding desired information, leading to getting improper outcomes. In this paper, we present an intuitive ontology model with weapon parts development information including the multi-dimensional information analysis and expansion of the relevant information. This study build up a ontology model through creating class and hierarchy about parts information and defining the properties of classes with Ontology Development 101[1] procedures using Protégé tools. The ontology model provides users with a platform on which search of needed information can be easy and efficient.

• Journal of Korean Society on Water Environment
• /
• v.27 no.5
• /
• pp.699-709
• /
• 2011

The uses of multi-dimensional hydrodynamic and water quality models are increasing to support a sustainable management of large dam reservoirs in Korea. Any modeling study requires selection of a proper spatial dimension of the model based on the characteristics of spatial variability of concerned simulation variables. For example, a laterally averaged two-dimensional (2D) model, which has been widely used in many large dam reservoirs in Korea, assumes that the lateral variations of hydrodynamic and water quality variables are negligible. However, there has been limited studies to give a justification of the assumption. The objectives of this study were to present the characteristics of spatial variations of water quality variables through intensive field monitoring in Daechung Reservoir, and provide information on a proper spatial dimension for different water quality parameters. The monitoring results showed that the lateral variations of water temperature are marginal, but those of DO, pH, and conductivity could be significant depending on the hydrological conditions and local algal biomass. In particular, the phytoplankton (Chl-a) and nutrient concentrations showed a significant lateral variation at R2 (Daejeongri) during low flow periods in 2008 possibly because of slow lateral mixing of tributary inflow from So-oak Stream and wind driven patchiness.

• Journal of the Korean Regional Science Association
• /
• v.14 no.1
• /
• pp.21-45
• /
• 1998

Urban quality of life(QOL) is recently considered as the important determinant of inter-urban migration and industrial location chice. However, there is little concensus in the method of measurement of QOL. This study provides an theoretical framework of the measurement of QOL. This study provides an theoretical framework of the measurement of QOL, and developes a new method, a multi-year$\cdot$mulit-dimensional distance index model. Based on the theoretical framework and the method, the QOLs of 74 urban areas in Korea are measured, and the determinants of the QOL and the changes of the QOL between two years of 1993 and 1995 are analyzed. The results of the analysis are as follows: 1) The interurban differences of the QOL tens to be interban differences of the QOL tend to be intensified over time. 2) The OQLs of the cities in the Capital Region are relatively deteriorated. 3) The conditions of education$\cdot$Culture$\cdot$leisure life determiner over 65% of the QOL of the Korean cities.

• Journal of the korean Society of Automotive Engineers
• /
• v.15 no.1
• /
• pp.73-80
• /
• 1993

In this study, 3-dimensional linear and non-linear vehicle models are proposed to improve ride quality. The simulations of a vehicle passing over a bump were performed with those two vehicle models. The dynamic responses of the models were analyzed in time-domain and frequency-domain. Then, discomforts in each vibration axis and the combined-axes were evaluated based on the vibrations of the proposed models. The actual vehicle test results in time domain and frequency domain. Also, the discomfort values were compared. Then the validity of those two models were verified. Also, the design parameters of the suspension system are proposed for improving the ride quality.

• Speech Sciences
• /
• v.14 no.4
• /
• pp.213-220
• /
• 2007

This study investigates the voice quality including F0, jitter, shimmer, and NHR for the children with cochlear implant (CI group) and those with normal hearing (NH group). The CI group was further classified two sub-groups depending upon the time of surgery (i.e. under four years vs. over four years). Three corner vowels (e.g. /a/, /i/, /u/) with extended vocalization were used and analyzed with Multi-Dimensional Voice Program (Kay Elemetrics, Model 4300). The statistics were made in two independent sample t-test with SPSS 11.5. The results can be summarized as follows: (1) The children with cochlear implanted before 4 years of age had very similar data with the NH group except for the vowel /a/. (2) The children with cochlear implanted after 4 years of age, however, indicated significant differences in Fo (/a/, /i/, /u/), Jitter (/e/), shimmer (/a/, /i/, /u/) and NHR(/a/) in all three vowels. It is concluded that the early CI surgery and the early intervention would be very important to maintain better voice quality.

• The Korean Journal of Applied Statistics
• /
• v.31 no.1
• /
• pp.97-108
• /
• 2018

It has been routine practice in regression analysis to check the validity of the assumed model by the use of regression diagnostics tools. Outliers and influential observations often distort the regression output in an undesired manner. Jang and Anderson-Cook (Quality and Reliability Engineering International, 30, 1409-1425, 2014) proposed a graphical method (called a firework plot) so that there could be an exploratory visualization of the trace of the impact of the possible outliers and influential observations on individual regression coefficients and the overall residual sum of the squares measure. This paper further extends a graphical approach to a multi-response surface methodology problem.

• Knowledge Management Research
• /
• v.19 no.2
• /
• pp.109-132
• /
• 2018

Recently, new financial services related to FinTech has gained attention more and more. Online P2P financial services transactions such as FinTech require careful examination of the constituents of information systems as an investment is made based on the information presented on the online platform without direct face-to-face contact. The purpose of this study is to find out the success factors of online P2P Lending service among FinTech. To serve the purpose, we build IS (information system) success model, and then use Kano model and fuzzy analytic hierarchy process (Fuzzy-AHP) to find out factors for the success of online P2P Lending service. In particular, this study uses Kano model to classify information system satisfaction factors and to calculate the satisfaction coefficient. The Kano model, however, has a drawback of evaluating single criterion. Therefore, we use multi-criteria decision-making technique such as Fuzzy-AHP to derive the relative importance of the factors. The analysis results show different results depending on the analysis technique. In the Kano model, most of the information system factors are a one-dimensional quality attribute. The satisfaction coefficient is highest for personalized service, followed by the responsiveness of service, ease of using a system, understanding of information, usefulness of information' reliability. The service reliability is the highest in dissatisfaction coefficient, followed by system security, service responsiveness, system stability, and personalized service. The results of the Fuzzy-AHP analysis shows that the usefulness of information quality, the personalization of service quality, and the security of system quality are the significant factors and the stability of system quality was a secondary factor.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.10
• /
• pp.2768-2787
• /
• 2023

As an important research direction of the application of computer science in the medical field, the automatic generation technology of radiology report has attracted wide attention in the academic community. Because the proportion of normal regions in radiology images is much larger than that of abnormal regions, words describing diseases are often masked by other words, resulting in significant feature loss during the calculation process, which affects the quality of generated reports. In addition, the huge difference between visual features and semantic features causes traditional multi-modal fusion method to fail to generate long narrative structures consisting of multiple sentences, which are required for medical reports. To address these challenges, we propose a multi-feature optimization Transformer (MFOT) for generating radiology reports. In detail, a multi-dimensional mapping attention (MDMA) module is designed to encode the visual grid features from different dimensions to reduce the loss of primary features in the encoding process; a feature pre-fusion (FP) module is constructed to enhance the interaction ability between multi-modal features, so as to generate a reasonably structured radiology report; a detail enhanced attention (DEA) module is proposed to enhance the extraction and utilization of key features and reduce the loss of key features. In conclusion, we evaluate the performance of our proposed model against prevailing mainstream models by utilizing widely-recognized radiology report datasets, namely IU X-Ray and MIMIC-CXR. The experimental outcomes demonstrate that our model achieves SOTA performance on both datasets, compared with the base model, the average improvement of six key indicators is 19.9% and 18.0% respectively. These findings substantiate the efficacy of our model in the domain of automated radiology report generation.