• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1585-1589
• /
• 2007

The HANARO, a 30 MW multi-purpose research reactor in Korea, will be equipped with a neutron guide system, in order to transport cold neutrons from the neutron source to the neutron scattering instruments in the neutron guide hall near the reactor building. The neutron guide system of HANARO consists of the in-pile plug assembly with in-pile guides, the primary shutter with in-shutter guides, the neutron guides in the guide shielding room with dedicated secondary shutters, and the neutron guides connected to the instruments in the neutron guide hall. The functions of the in-pile plug assembly are to shield the reactor environment from a nuclear radiation and to support the neutron guides and maintain them precisely oriented. The primary shutter is a mechanical device to be installed just after the in-pile plug assembly, which stops neutron flux on demand. This paper describes the mechanical design of the in-pile plug assembly and the primary shutter for the neutron guide system at HANARO. The design of the guide shielding assembly for the primary shutter and the neutron guides is also presented.

• 한국인쇄학회지
• /
• 제26권1호
• /
• pp.87-96
• /
• 2008

Paper stock could be situated in a cooled environment seasonally and/or regionally otherwise it is stored in a controlled warehouse. In this paper, printing problems on a cooled paper are investigated and characterized in terms of paper properties. For this purpose, various kinds of sample are cooled down under a specially designed freezing device and printed for observing their printability. Causes for poor ink transfer on a cooled paper are suggested due to condensation, surface inactivity, and rheological change in ink film. Paperboards with higher amount of binder, thick and/or multi-coated layers are more vulnerable to poor ink trap. Severe drying of wet coating could cause a similar result as that of the coatings with higher binder formulation. It is shown that more absorptive porous structure is desirable for better ink receptivity in a cooled status. Printing on a dampened surface may be an indicator for ink transferability on a cooled paper. Finally, desirable directions for papermaker and printshop are suggested.

• Journal of Multimedia Information System
• /
• 제1권1호
• /
• pp.11-22
• /
• 2014

This work discusses and evaluates the use of wireless and multi-sensor based technologies to develop UbiqBIOPARC, a new generation zoological park that has been created based on the zoo-immersion concept. It offers appropriate contextual information to zoo visitors, depending on their preferences and the environment in which they are positioned. It combines the flexibility of the iPhone SDK, the connectivity provided by 3G technologies, the location capabilities of GPS, and the orientation offered by a digital compass integrated in the device. In this document the overall architecture and the implementation steps followed to create this context-aware application are presented. We compare our system with respect to previous ones and demonstrate that UbiqBIOPARC is an example of how innovative context-aware applications can be built with the aid of GPS and compass features. Several real experiments have been carried out in order to evaluate performance and system behavior, and numerical results demonstrate the practicality offered by our application, while providing a quite reasonable performance in terms of delay, usability, and energy efficiency.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.92-95
• /
• 2008

The Geostationary Ocean Color Imager (GOCI) is under development to provide a monitoring of ocean-color around the Korean Peninsula from geostationary platforms. It is planned to be loaded on Communication, Ocean, and Meteorological Satellite (COMS) of Korea. The GOCI has been designed to provide multi-spectral data to detect, monitor, quantify, and predict short term changes of coastal ocean environment for marine science research and application purpose. The target area of GOCI observation covers sea area around the Korean Peninsula. Based on the nonlinear radiometric model, the GOCI calibration method has been derived. The radiometric model of GOCI has been validated through radiometric ground test. From this ground test result, GOCI radiometric model has been changed from second order to third order. In this paper, the radiometric test performed to evaluate the radiometric nonlinearity is described and the GOCI radiometric error propagation is analyzed. The GOCI radiometric calibration is based on onboard calibration devices; solar diffuser, DAMD (Diffuser Aging Monitoring Device). The radiometric model error due to the dark current nonlinearity is considered as a systematic error. Also the offset correction error due to gain/offset instability is considered. The radiometric accuracy depends mainly on the ground characterization accuracies of solar diffuser and DAMD.

• 전기학회논문지
• /
• 제61권6호
• /
• pp.865-871
• /
• 2012

In this study, ambulatory electrocardiogram(ECG) signal and the rhythms of heart beats are visualized in terms of R-R intervals and Heart Rate Variability(HRV) in the environment of an android plaform. With this aim, Graphical User Interface(GUI) is implemented by executing multi-thread Java programming modules including ECG, heart-beats, tachogram and visualization unit. ECG signals are acquired in an android device by receiving the data from ambulatory ECG sensory system. Finite Impulse Response(FIR) filters are implemented to eliminate the baseline wandering noises contained in the ambulatory signals and DC-offset level in R-R interval data. With simulating the normal or stress emotional state of a subject, we can find the fact that HRV can be successfully estimated and visualized in an android smart phone platform.

• 한국경영과학회지
• /
• 제37권4호
• /
• pp.95-109
• /
• 2012

Being able to quickly locate valuable medical equipment is critical inside hospitals. In order to utilize limited budget and resources efficiently, accurate locating or tracking is required in many fields. In this research, we focus on how to find the location of missing assets by using RFID in real time indoors to track equipment. When equipment needs to be searched, the purpose of a RFID device is to minimize the time, investment cost and effort spent searching for the equipment. Thus, this research presents a mathematical model of using RFID (both handheld reader and stationary reader) for efficient asset location. We derive the expected time of locating RFID-tagged objects in a multi-area environment where hand-held RF readers are used. We then discuss where to deploy stationary RF readers in order to maximize the efficiency of the search process.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 추계학술발표논문집
• /
• pp.17-27
• /
• 2006

Paper could be situated in a cooled environment seasonally or regionally otherwise it is forced to be in a controlled circumstance. In this paper, printing problems on a cooled paper are investigated and characterized in terms of paper properties. For this purposes, various kinds of sample are cooled down under a specially designed freezing device and printed for observing their printability. Causes for poor ink transfer on a cooled paper are suggested due to condensation, surface inactivity, and rheological change in ink film. Paperboards with higher amount of binder, thick and/or multi coat layers are more vulnerable to poor ink trap. Severe drying could cause the same effect as that of higher binder formulation. It is shown that more absorptive porous structure is desirable for better ink receptivity in a cooled status. Printing on a dampened surface may be an indicator for ink transferability on a cooled paper. Finally, desirable directions for papermaker and printshop are suggested.

• 한국정보과학회논문지:정보통신
• /
• 제32권6호
• /
• pp.651-658
• /
• 2005

모바일 장치의 사용이 대중화되면서 무선 통신을 이용한 화상회의, 다중 사용자 게임, 인터랙티브 채팅 등의 그룹 기반의 어플리케이션에 대한 관심이 증가되고 있다. 이러한 그룹 기반의 어플리케이션이 안전하게 수행되기 위해서는 그룹 구성원간 안전한 통신을 위한 키 동의가 선행되어야 한다. 기존에 제안된 모바일 환경에서의 그룹키 동의 프로토콜에서는 하나의 셀 내의 모바일 장치들이 그룹키를 공유하는 것을 고려하였다. 본 논문에서는 기존 모델을 확장하여 최초로 서로 다른 셀에 속한 모바일 장치들 간의 그룹키 동의 프로토콜을 제안하고 안전성을 분석하도록 한다. 또한 모바일 장치의 계산 부담을 줄이기 위해 패스워드 인증 방식을 제안한 프로토콜에 적용해 보도록 한다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 춘계학술대회
• /
• pp.230-231
• /
• 2016

무선통신기술의 발달과 전자장치의 고도화된 집적화로 인해 수많은 사물이 인터넷에 연결되는 사물인터넷 시대가 열렸다. 사물인터넷이 적용되는 다양한 장치들은 제한된 전원과 통신 성능을 가지므로 각 장치와 인터넷의 연결을 위한 효율적인 데이터 전달이 필요하다. 본 논문에서는 사물인터넷 게이트웨이와 다중 홉 통신을 수행하는 환경에서 각 장치의 64bit의 IPv6 주소를 작은 크기의 ID로 축약하여 통신의 효율성을 향상시켰다. 시뮬레이션을 통해 성능평가를 수행하였으며, 헤더 부하를 96.5% 감소시키고 전송 성공률이 24.3% 향상됨을 확인하였다.

• Journal of Communications and Networks
• /
• 제13권2호
• /
• pp.167-174
• /
• 2011

In this paper, we propose and simulate an efficient interference cancellation scheme with an optimal ordering successive interference cancellation (SIC) algorithm for ultra wideband (UWB)/multiple-input-multiple-output (MIMO) systems in a wireless body area network (WBAN). When there are several wireless communication devices on a human body, multiple access interference (MAI) usually occurs. To mitigate the effect of MAI and achieve additional diversity gain, we utilize SIC with an optimal ordering algorithm. A zero correlation duration (ZCD) code with robust MAI capability is employed as a spread code for UWB systems in a multi-device WBAN environment. The performance of the proposed scheme is evaluated in terms of the bit error rate (BER). Simulation results confirm that the BER performance can be improved significantly if the proposed interference cancellation scheme and the ZCD code are jointly employed.