• 한국전산유체공학회지
• /
• 제19권2호
• /
• pp.72-78
• /
• 2014

A hybrid particle-mesh method as the combination between the Vortex-In-Cell (VIC) method and penalization method has been achieved in recent years. The VIC method, which is based on the vorticity-velocity formulation, offers particle-mesh algorithms to numerically simulate flows past a solid body. The penalization method is used to enforce boundary conditions at a body surface with a decoupling between body boundaries and computational grids. The main advantage of the hybrid particle-mesh method is an efficient implementation for solid boundaries of arbitrary complexity on Cartesian grids. However, a numerical simulation of flows in large domains is still not too easy. In this study, a multi-domain approach is thus proposed to further reduce computation cost and easily implement it. We validate the implementation by numerical simulations of an incompressible viscous flow around an impulsively started circular cylinder.

• 한국재료학회지
• /
• 제14권5호
• /
• pp.368-373
• /
• 2004

To improve the conventional cathode-supported tubular solid oxide fuel cell (SOFC) from the viewpoint of low cell power density, expensive fabrication process and high operation temperature, the anode-supported tubular solid oxide fuel cell was investigated. The anode tube of Ni-8mol% $Y_2$O$_3$-stabilized $ZrO_2$ (8YSZ) was manufactured by extrusion process, and, the electrolyte of 8YSZ and the multi-layered cathode of $LaSrMnO_3$(LSM)ILSM-YSZ composite/$LaSrCoFeO_3$ were coated on the surface of the anode tube by slurry dip coating process, subsequently. Their cell performances were examined under gases of humidified hydrogen with 3% water and air. In the thermal cycle condition of heating and cooling rates with $3.33^{\circ}C$/min, the anode-supported tubular cell showed an excellent resistance as compared with the electrolyte-supported planar cell. The optimum hydrogen flow rate was evaluated and the air preheating increased the cell performance due to the increased gas temperature inside the cell. In long-term stability test, the single cell indicated a stable performance of 300 mA/$\textrm{cm}^2$ at 0.85 V for 255 hr.

• 한국도로학회논문집
• /
• 제12권4호
• /
• pp.11-16
• /
• 2010

보행교통류를 주제로 다양한 연구들이 진행되었지만 초기의 보행연구는 차량의 교통류이론을 그대로 적용하여 해석하기도 하였다. 최근 보행교통류에 대한 다양한 모형들이 제시되고 있으며, 특히 CA모형은 보행교통류를 위한 시뮬레이션 모형으로 빈번하게 사용되고 있다. 대표적인 CA 모형으로 가스입자의 움직임을 이용하여 양방향의 보행교통류를 설명하기도 하였는데 초기에는 정방형의 Gas-lattice 모형이 제안되었으며 이후에 정육방 Gas-lattice 모형을 이용하여 보행자의 움직임과 회피를 묘사하기도 하였다. 하지만 이러한 모형들은 보행자의 움직임을 편의임의보행으로 가정하였기 때문에 단일방향으로의 움직임만을 설명할 수 있었다. 본 연구에서 제시된 MLPM(the Multi-Layer Pedestrian Model)은 어떤 공간에서 복수개의 기종점을 가진 경우에도 현실적인 보행자의 움직임을 설명할 수 있는 모형이다.

• 에너지공학
• /
• 제11권3호
• /
• pp.254-261
• /
• 2002

The fabrication method for the main components of the polymer electrolyte membrane fuel cell stack such as electrodes, membrane-electrode assemblies, and bipolar plates was established for the effective electrode area of 240 ㎠. A counter-flow type 100-cell stack was fabricated by using the above components and then a maximum power of 7.44 kW for H$_2$/O$_2$ and 5.56 kW for H$_2$/air could be obtained at 70$\^{C}$ and 1 atm. It was seen that the distribution of the OCV for unit cells in the stack was uniform but the voltage deviation increased as the load increased due to the IR drop and the electrode polarization. The stack was applied to the power source of the fuel cell/battery hybrid electric golf car. It produced about 1 kW at a room temperature operation during the test run, which occupied about 43% of the total power required by the 2.3 kW motor.

• 대한기계학회논문집B
• /
• 제33권9호
• /
• pp.688-698
• /
• 2009

Using the multi-dimensional, multi-phase, nonisothermal Polymer Electrolyte Fuel Cell (PEFC) model presented in Part I, the effects of land/channel flow-field on temperature and liquid saturation distributions inside PEFCs are investigated in Part II. The focus is placed on exploring the coupled water transport and heat transfer phenomena within the nonisothermal and two-phase zone existing in the diffusion media (DM) of PEFCs. Numerical simulations are performed varying the land and channel widths and simulation results reveal that the water profile and temperature rise inside PEFCs are considerably altered by changing the land and channel widths, which indicates that oxygen supply and heat removal from the channel to the land regions and liquid water removal from the land toward the gas channels are key factors in determining the water and temperature distributions inside PEFCs. In addition, the adverse liquid saturation gradient along the thru-plane direction is predicted near the land regions by the numerical model, which is due to the vapor-phase diffusion driven by the temperature gradient in the nonisothermal two-phase DM where water evaporates at the hotter catalyst layer, diffuses as a vapor form and then condenses on the cooler land region. Therefore, the vapor phase diffusion exacerbates DM flooding near the land region, while it alleviates DM flooding near the gas channel.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.224-224
• /
• 2012

For decades, carbon fiber has expanded their application fields from reinforced composites to energy storage and transfer technologies such as electrodes for super-capacitors and lithium ion batteries and gas diffusion layers for proton exchange membrane fuel cell. Especially in fuel cell, water repellency of gas diffusion layer has become very important property for preventing flooding which is induced by condensed water could damage the fuel cell performance. In this work, we fabricated superhydrophobic network of carbon fiber with high aspect ratio hair-like nanostructure by preferential oxygen plasma etching. Superhydrophobic carbon fiber surfaces were achieved by hydrophobic material coating with a siloxane-based hydrocarbon film, which increased the water contact angle from $147^{\circ}$ to $163^{\circ}$ and decreased the contact angle hysteresis from $71^{\circ}$ to below $5^{\circ}$, sufficient to cause droplet roll-off from the surface in millimeter scale water droplet deposition test. Also, we have explored that the condensation behavior (nucleation and growth) of water droplet on the superhydrophobic carbon fiber were significantly retarded due to the high-aspect-ratio nanostructures under super-saturated vapor conditions. It is implied that superhydrophobic carbon fiber can provide a passage for vapor or gas flow in wet environments such as a gas diffusion layer requiring the effective water removal in the operation of proton exchange membrane fuel cell. Moreover, such nanostructuring of carbon-based materials can be extended to carbon fiber, carbon black or carbon films for applications as a cathode in lithium batteries or carbon fiber composites.

• International Journal of Precision Engineering and Manufacturing
• /
• 제1권2호
• /
• pp.124-131
• /
• 2000

A shop floor can be considered as and importand level to develop a Computer Integrated Manufacturing system (CIMs). The shop foor is a dynamic environment where unexpected events contrinuously occur, and impose changes to planned activities. The shop floor should adopt an appropriate control system that is responsible for scheduling coordination and moving the manufacturing material and information flow. In this paper, the architecture of the hybrid control model identifies three levels; i.e., the shop floor controller (SFC), the cell controller(CC) and the equipment controller (EC). The methodology for developing these controller is employ an object-oriented approach for static models and IDEF0 for function models for dispatching a job. SFC and CC are coordinated by employing a multi-factors bidding and an adapted Analytic Hierarchy Process(AHP) prove applicability of the suggested method. Test experiment has been conducted by with the shopfloor, consisting of six manufacturing cells.

• 대한기계학회논문집B
• /
• 제34권10호
• /
• pp.885-891
• /
• 2010

고분자 전해질 연료전지(PEMFC)의 열관리는 성능 향상과 내구성 측면에서 중요한 문제이다. 일반적으로 냉각수 순환 유로를 가진 냉각판이 여러 개의 단전지 사이에 삽입되어 PEMFC 내부에서 발생하는 반응열을 외부로 배출한다. 본 연구에서는 개선된 병렬 사형유로(MPSFF)를 향상된 냉각성능을 가진 냉각판 유로형상으로 제안하고, 이를 전산유체역학(CFD) 해석을 통하여 평가하였다. 비교를 위하여 냉각수 유로로 일반적으로 사용되는 사형유로 및 병렬형유로의 냉각성능에 대한 계산도 수행하였다. CFD 결과는 개선된 병렬 사형유로가 냉각판 표면에서의 온도의 비균일도를 상당히 감소시키고, 따라서 PEMFC의 내구성과 성능을 향상시킬 수 있음을 보여주었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.30-32
• /
• 2001

There are many difficult problems in analyzing the flow characteristics in a high voltage circuit breaker such as shock wave and complex geometries, which may be either static or in relative motion. Although a variety of mesh generation techniques are now available, the generation of meshes around complicated, multi-component geometries like a gas circuit breaker is still a tedious and difficult task for the computational fluid dynamics. This paper presents the CFD program for analyzing the compressible flow fields in a high voltage gas circuit breaker using the Cartesian cut-cell method based on the CFD-CAD integration, which can achieve the accurate representation of the geometry designed by a CAD tools. This technique is frequently satisfied, and it will be almost universally so in the future, as the CFD-CAD traffic increase.

• 정보학연구
• /
• 제1권2호
• /
• pp.65-79
• /
• 1998

본 논문에서는 ATM 망으로 입력되는 트래픽(CBR/VBR)의 QoS 특성을 만족시키기 위한 버퍼할당 및 버퍼관리 메카니즘을 제안하였다. 본 논문에서 제안하는 ATM 망의 트래픽 처리방식은 입력되는 트래픽의 특성에 따라 버퍼를 각각 할당하는 방식을 사용하는 경로분리 메카니즘을 기본으로하며 임계치를 설정하여 버퍼관리 메카니즘의 셀처리 스케줄링 및 알고리즘, 그리고 서비스 크래스의 특성에 따라 요구되는 평균 셀지연과 셀손실을 고찰하였고, CBR/VBR 버퍼의 임계치가 셀지연이나 셀손실에 많은 영향을 미치는 것을 확인할 수 있었다.