• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.3 s.345
• /
• pp.84-94
• /
• 2006

In this paper, we propose the algorithm to reduce guard time of UWB MAC time slot for throughput gain. In the proposed draft by multiband ofdm alliance (MBOA), Guard time of each medium access slot (MAS) is composed of shortest inter-frame space (SIFS) and MaxDrift which is the time caused by maximum frequency offset among devices. In this paper, to reduceguard time means that we nearly eliminate MaxDrift term from guard time. Each device of a piconet computes relative frequency offset from the device initiating piconet using periodically consecutive transferred beacon frames. Each device add or subtract the calculated relative frequency offset to the estimated each MAS starting point in order to synchronize with calculated MAS starting point of the device initiating piconet. According to verification of simulations, if the frequency offset estimator is implemented with 8 decimal bit, the ratio of the wasted time to Superframe is always less than 0.0001.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12B
• /
• pp.1452-1458
• /
• 2009

In this paper, Our proposed Multipurpose Complex Card UHF band RFID small-size Tag antenna. Multi purpose Complex Card UHF band RFID small-size Tag antenna that is to minimize the low efficiency of RFID Tag Read Range that generates space limitation and a conductor surrounded by inducing fingerpring system with dual(HF, UHF) Card is presented. Our proposed UHF band RFID small-size Tag antenna is for the Multipurpose Complex Card that is mounted on the fingerpring system as well as the HF Tag. It also enables to minimize and facilitates Tag chip matching by adjusting Tapered, Meander line and Loop structure. Given the card substance properties and periphery circuit, the proposed small-size Tag antenna, in this report, is designed with PET film with size of $50{\times}15mm^2$. The RFID small-size Tag method for measurements is used by EPCglobal Static Test instrument in Anechoic Chamber, which is tested with dual Card, within the car and in wallet. It is found that Read Range is 3.8m from the EPCglobal Static Test, Maximum Read Range within the car from the field test results in 7.6m. Proposed Tag antenna is will be used in the parking control security system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.5
• /
• pp.944-949
• /
• 2015

This study proposed a patch antenna with a MIMO structure which is applicable for wireless communication equipment by combining a single patch antenna with a multi port. The proposed MIMO patch antenna was designed through the TRF-45 substrate with a relative permittivity of 4.5, loss tangent equal to 0.0035 and dielectric high of 1.6 mm, and the center frequency of the antenna was 2.45 GHz in the ISM (Industrial Scientific and Medical) band. The proposed MIMO patch antenna had a 500 MHz bandwidth from 2.16 ~ 2.66 GHz and 24.1% fractional bandwidth. The return loss and VSWR were -62.05 dB, 1.01 at the ISM bandwidth of 2.45 GHz. The Wibro band of 2.3 GHz was -17.43 dB, 1.33, the WiFi band of 2.4 GHz was -31.89 dB, 1.05, and the WiMax band of 2.5 GHz was -36.47 dB, 1.03. The radiation patterns included in the bandwidth were directional, and the WiBro band of 2.3 GHzhad a gain of 4.22 dBi, the WiFi band of 2.4 GHz had a gain of 4.12 dBi, the ISM band of 2.45 GHz had a gain of 4.06dBi, and the WiMax band of 2.5 GHz had a gain of 3.9 6dBi.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.11A
• /
• pp.912-920
• /
• 2003

This paper is about the design of a small wide-band slot loop antenna, which consists of dual offset-fed and rectangular loop within the slot on a substrate. The proposed antenna is a novel structure generating a multi-resonances due to three geometrical resonance structures. The impedance matching of this antenna can be accomplished by changing the offset position of dual-fed at resonance frequencies. In this experiment, the slot of a fabricated antenna has a center frequency of 6.755㎓, 12.5mm${\times}$50mm in size and the rectangular loop has 10.5mm${\times}$27.5mm in size. The measured result is fractional bandwidth 63.21% with VSWR 2:1, which is agreed with the simulated result within 5% of error, and the maximum antenna gain is 7.42㏈i.

• Journal of Advanced Navigation Technology
• /
• v.9 no.1
• /
• pp.1-8
• /
• 2005

In this paper, an impulse generator for UWB(Ultra Wide-band) technique with great possibility to be adopted as a next generation indoor WLAN(Wireless Local Area Network) has been designed by using SRD(Step Recovery Diode). Design goal is to design an impulse generator with simple structure, low cost, small size, and high performance. The impulse generator satisfied by FCC's regulation ( frequency range: 3.1~10.6 GHz, limit of power level: -41.25 dBm ) has been simulated by using ADS(Advanced Design System) which is the trade name of the Agilent Technologies. The output power of the impulse generator has been explained separately for single and multi band purposes, respectively.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.81-84
• /
• 2005

In this paper, we investigate the method for reducing the amount of feedback in multi-user downlink orthogonal frequency division multiple access (OFDMA) systems. The objective is to maximize the total throughput of the system under the constraints of transmit power. In previous methods, each user in a cell transmits channel quality information (CQI) of its all sub-bands to the base station, which requires extremely high feedback overhead. Thus, we propose an efficient sub-band allocation algorithm in which each user transmits partial CQI and one additional information to reduce the amount of feedback. Simulation results show that we can greatly reduce the amount of feedback than full feedback system.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.32-32
• /
• 2013

The Korean VLBI Network (KVN) as a world-first multi-frequency VLBI system is operated at four bands of 22, 43, 86, and 129 GHz simultaneously. The performances of both single dish and VLBI network were already confirmed through single dish researches and VLBI evaluation test observations. The VLBI common use of the KVN at 22/43 GHz bands has been started from this autumn. The combined network of KVN and Japanese VERA (KaVA) will start the common use from the first half of next year. Here we present several observational results in the fields of star forming regions, late-type stars, and active galactic nuclei using the KVN and KaVA. The fringes of 44 GHz $CH_3OH$ (Class I) masers were detected from 26 sources for the first time using the KVN and imaging observations are under performing. Simultaneous observations of SiO and $H_2O$ masers toward about 1000 evolved stars showed the different maser properties between SiO and $H_2O$ masers according to the evolutionary stages of AGB and post-AGB stars. The catalog of correlated flux densities were established from a 43 GHz (Q-band) survey of 637 extragalactic sources. At 22 GHz (K-band), flux density measurement and fringe survey for new sources were performed toward a large number of sources. In addition, the large program of KVN and/or KaVA under planning is introduced.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.10
• /
• pp.998-1004
• /
• 2002

This paper reports a design of feedforward linear power amplifier using pilot tone for IMT-2000 band repeaters accepting multi-carrier. As this time pilot tone is applied to the circuit differently from the existing method. Only one pilot tone is used in both 1-st loop(IMD abstraction loop) and 2-nd loop(IMD cancellation loop) to cancell IMD signals automatically according to variation of frequency or power level of input signals. As an experiment, in range of 2110 MHz - 2170 MHz at LPA output power of $20 W_{avg}$, IMD characteristics of over 20 dB was improved maintaining below -60 dBc considering respective 20 MHz. Therefore the supposed feedforward linear power amplifier can be used for linear power amplifier in IMT-2000 band repeaters.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.2A
• /
• pp.121-129
• /
• 2008

This paper presents the spatial multiplexing MIMO system to increase data rate to double in MB-OFDM UWB system, which is ECMA standards, and compares BER performance of various receiver structures. The complexity and BER performance of various types of spatial multiplexing receivers are compared and analyzed using diagonal and horizontal encoding techniques for $2{\times}2$\;and\;2{\times}3$ antennas systems. Computer simulations exhibit that $2{\times}2$ MML and $2{\times}3$ ZF method show better BER performance than that of SISO system with simple complexity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.5A
• /
• pp.494-499
• /
• 2008

In this study, a Software Defined Radio(SDR) technology-based digital filtering technique applicable to a multiple channel processing system such as a wireless mobile communication system using Code Division Multiple Access(CDMA) technology is proposed. The technique includes a micro-processor to redesign Finite Impulse Response(FIR) filter coefficients according to specific system information and to download the filter coefficients to one digital Band Pass Filter(BPF) to reconfigure another system. The feasibility of the algorithm is verified by implementing a multiple channel signal generator that is reconfigurable to other system profiles, including those for a CDMA system and a WCDMA system on identical hardware platform.