• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권6호
• /
• pp.2689-2708
• /
• 2016

Multi-camera systems which integrate two or more low-cost digital cameras are adopted to reach higher ground coverage and improve the base-height ratio in low altitude remote sensing. To guarantee accurate multi-camera integration, the geometric relationship among cameras must be determined through platform calibration techniques. This paper proposed a combined two-step platform calibration method. In the first step, the static platform calibration was conducted based on the stable relative orientation constraint and convergent conditions among cameras in static environments. In the second step, a dynamic platform self-calibration approach was proposed based on not only tie points but also straight lines in order to correct the small change of the relative relationship among cameras during dynamic flight. Experiments based on the proposed two-step platform calibration method were carried out with terrestrial and aerial images from a multi-camera system combined with four consumer-grade digital cameras onboard an unmanned aerial vehicle. The experimental results have shown that the proposed platform calibration approach is able to compensate the varied relative relationship during flight, acquiring the mosaicing accuracy of virtual images smaller than 0.5pixel. The proposed approach can be extended for calibrating other low-cost multi-camera system without rigorously mechanical structure.

• 한국생산제조학회지
• /
• 제22권6호
• /
• pp.901-907
• /
• 2013

The development of high-rise firefighting vehicles warrants thorough structural analysis for ensuring vehicle stability. A few structural analyses were carried out using CAD data, material properties, load conditions, and boundary conditions for evaluating the structural stability of an overloaded multi-aerial platform for firefighting and rescue. Structural analysis was performed with an analytical model consisting of a turntable, six booms, two jib booms, and a basket structure. This model was operated in eight modes. All simulation was performed using NASTRAN, a commercial code. As a result, we confirm that the position of local stress exceeds that of the yield strength. Therefore, stress concentration relaxation is possible by introducing reinforcing boom structures, changing the shape, or imparting a larger moment of inertia to the booms' cross sections.

• 한국생산제조학회지
• /
• 제21권6호
• /
• pp.885-891
• /
• 2012

In this study, some structural analysis using 3D CAD data, material properties, load conditions and boundary conditions are carried out to evaluate structural stability of the multi-aerial platform for high-rise fire fighting and rescue. We conduct structural analysis for the upper structures such as turn table, booms and basket, by using a universal structural analysis program NASTRAN. As the results, there is local stress exceeding the yield strength, but it is able to relax stress concentration in a way such as changing thickness of the structure or making larger inertia moment in cross section of booms.

• International Journal of Aeronautical and Space Sciences
• /
• 제10권2호
• /
• pp.140-147
• /
• 2009

The paper presents the design, development and testing activities of the multi-rotorcraft-based unmanned aerial vehicle at the Center for Unmanned System Studies, Institut Teknologi Bandung (ITB), Indonesia. The multi-rotor system was selected as the design stepping stone for future development of personal aerial vehicle prototypes. A step-by-step design program is conducted to study the technology building blocks and critical issues associated with the design, development and operation of personal aerial vehicles. A number of multi-rotor configurations have been investigated providing basic guidelines for developing a stable unmanned aerial platform. The benefit of the presently selected configuration is highlighted and some preliminary testing results are presented.

• 한국시뮬레이션학회논문지
• /
• 제24권3호
• /
• pp.69-75
• /
• 2015

본 연구에서는 복합굴절차의 강도 해석을 통한 구조적 안정성을 평가하고자 한다. 3D CAD 데이터, 사용 재질에 대한 물성값, 하중 조건 및 경계조건을 바탕으로, 범용 구조 해석 프로그램인 Nastran을 활용하여 복합굴절차에 대한 정적 구조 해석을 실시하였다. 하부 프레임(Sub frame, Out-trigger, Chassis frame)에 대한 구조해석을 수행하기 위해, 각 Out-trigger가 최대 하중을 받는 4가지 경우를 산정하였다. 이러한 해석된 결과를 통하여 국부적으로 강도가 부족한 위치를 특정지어, 보다 안전한 설계에 도움이 되도록 하였다.

• 대한원격탐사학회지
• /
• 제20권5호
• /
• pp.337-351
• /
• 2004

Our laboratory originally developed the compact, multi-spectral, automatic aerial photographic system PKNU3 to allow greater flexibility in geological and environmental data collection. We are currently developing the PKNU3 system, which consists of a color-infrared spectral camera capable of simultaneous photography in the visible and near-infrared bands; a thermal infrared camera; two computers, each with an 80-gigabyte memory capacity for storing images; an MPEG board that can compress and transfer data to the computers in real-time; and the capability of using a helicopter platform. Before actual aerial photographic testing of the PKNU3, we experimented with each sensor. We analyzed the lens distortion, the sensitivity of the CCD in each band, and the thermal response of the thermal infrared sensor before the aerial photographing. As of September 2004, the PKNU3 development schedule has reached the second phase of testing. As the result of two aerial photographic tests, R, G, B and IR images were taken simultaneously; and images with an overlap rate of 70% using the automatic 1-s interval data recording time could be obtained by PKNU3. Further study is warranted to enhance the system with the addition of gyroscopic and IMU units. We evaluated the PKNU 3 system as a method of environmental remote sensing by comparing each chlorophyll image derived from PKNU 3 photographs. This appraisement was backed up with existing study that resulted in a modest improvement in the linear fit between the measures of chlorophyll and the RVI, NDVI and SAVI images stem from photographs taken by Duncantech MS 3100 which has same spectral configuration with MS 4000 used in PKNU3 system.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 추계학술발표회 논문집
• /
• pp.143-152
• /
• 2004

Researchers seeking geological and environmental information, depend on remote sensing and aerial photographic datum from various commercial satellites and aircraft. However, adverse weather conditions as well as equipment expense limit the ability to collect data anywhere and anytime. To allow for better flexibility in geological and environmental data collection, we have developed a compact, multi-spectral automatic Aerial Photographic system (PKNU2). This system's Multi-spectral camera can record visible (RGB) and infrared (NIR) band (3032＊2008 Pixels) images Visible and infrared band images were obtained from each camera respectively and produced color-infrared composite images to be analyzed for the purpose of the environmental monitoring. However this did not provide quality data. Furthermore, it has the disadvantage of having the stereoscopic overlap area being 60% unsatisfied due to the 12 seconds of storage time of each data The PKNU2 system in contrast, photographed photos of great capacity Thus, with such results, we have been proceeding to develop the advanced PKNU2 (PKNU3) system that consists of a color-infrared spectral camera that can photograph in the visible and near-infrared bands simultaneously using a single sensor, a thermal infrared camera, two 40G computers to store images, and an MPEG board that can compress and transfer data to the computer in real time as well as be able to be mounted onto a helicopter platform.

• 한국측량학회지
• /
• 제28권3호
• /
• pp.369-375
• /
• 2010

다각사진은 3차원 공간정보의 시각화 뿐 아니라 측정 목적으로도 사용되므로 카메라 시스템에 대한 캘리브레이션이 요구된다. 다각사진 카메라 시스템을 구성하는 각 카메라는 홀더에 장착되어 상대적인 자세 및 위치가 고정된다. 따라서 투영중심점 위치와 자세각은 중앙에 장착된 연직사진에 대해서 적용하고 나머지 4 대의 경사사진용 카메라에 대한 투영중심점 위치 및 자세각은 연직사진에 대한 상대적인 값으로부터 계산될 수 있다. 이에 본 연구에서는 다각사진 카메라 시스템에 의해 실제 촬영된 다각사진을 이용하여 항공삼각측량을 실시 한 후 얻어진 다각사진의 외부표정요소로부터 연직사진을 기준으로 경사사진의 상대적 자세각과 투영중심점의 상대적 위치에 대해 조사 분석하였다. 연구결과 연직사진에 대한 경사사진의 투영중심점 위치는 표준편차가 크게 나타났으며 자세각에 대해서는 경사방향에 관계없이 연직사진을 고정하고 경사사진만 조정할 때 그 표준편차가 더 작게 나타났다. 또한 전체 외부표정요소를 구할 경우보다 자세각만 구할 경우 전반적으로 표준편차가 작으며 안정적인 것을 알 수 있었다.

• 한국산업융합학회 논문집
• /
• 제25권4_2호
• /
• pp.655-662
• /
• 2022

Recently, with the increase in the use of UAV(unmanned aerial vehicles), research on horizontal maintenance stations that can take off and land in various environments has been actively conducted. These stations can safely land UAV through multiple DOF(degrees of freedom) or at least 2-DOF-based actuator actuation. Among them, many researchers are dealing with the multi-DOF stewart platform due to its high safety. However, the stewart platform requires high-precision control technology because it requires a lot of torque to actuate according to the load action. Therefore, in this paper, to solve the mentioned problem, a bevel gear-based 2-DOF horizontal maintenance station system is proposed. The proposed system is configured to prevent damage due to air resistance when maintaining ships and to install it in a small space. Also, in terms of system configuration, the bevel gear-based horizontal maintenance system has the main advantage of being able to take off and land UAVs of various sizes through the replacement of station pads. The driving of the system consists of a simple form that can control the motor by adjusting the rotation speed of the motor according to the sea waveform.

• Spatial Information Research
• /
• 제19권4호
• /
• pp.21-31
• /
• 2011

최근 대규모 재난 재해의 발생빈도가 증가하고 있으며 이로 인한 인명 재산 피해를 최소화하고 신속한 복구를 위하여 긴급 상황에 빠르게 대처해야 한다. 긴급 상황에 보다 효율적으로 대처하기 위하여 발생 지역의 공간정보를 신속 정확하게 취득하는 것이 중요하다. 따라서 본 연구에서 신속하게 대상지역의 고해상도 공간정보를 취득할 수 있는 저고도 무인 항공기 기반의 근접 실시간 공중 모니터링 시스템을 개발하고 있다. 근접 실시간 공중 모니터링 시스템은 항공 플랫폼과 디지털카메라, 레이저스캐너, GPS/IMU와 같은 멀티센서, 센서의 지원모듈로 구성되는 항공부문과 지상 차량, 항공부분으로부터 실시간 센서 데이터를 수신하는 수신부와 고속으로 공간 정보를 생성하는 처리부로 구성되는 지상부문으로 이루어진다. 항공부문은 저고도 무인항공기를 플랫폼으로 하며 저가 경량의 센서들과 자체 개발된 지원시스템으로 이루어지는 구성의 독창성을 가지며 지상부문은 센서데이터를 실시간으로 수신 및 처리하여 대상지의 공간정보를 고속으로 제공한다는 차별성을 가진다. 현재 시스템의 하드웨어는 개발 완료된 상태이며 개별 소프트웨어 통합 및 시스템 검증을 수행하고 있다. 본 논문에서 개발 중의 시스템을 소개하고 현재까지의 연구 성과, 향후 기대되는 최종 성과를 제시하고자 한다.