• The KIPS Transactions:PartA
• /
• v.16A no.1
• /
• pp.1-8
• /
• 2009

Ubiquitous computing requires an intelligent environment where the users do not need to be involved in the operation. The agent technology allows effective implementation of ubiquitous system, while agent platform provides efficient and stable interaction between the agents. In this paper we propose a hierarchical P2P networking approach where the messages are combined inside the agent platform and then compressed in two levels. The proposed approach capitalizes the static nature of the messages of typical context-aware applications. Experiment with an actual multi-agent system reveals that the response time and throughput are significantly improved compared to the existing scheme.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.3
• /
• pp.268-275
• /
• 2003

In this paper, the capacity of VSG-CDMA system supporting multi-media service in the reverse link is analyzed by considering the two models according to the power control and user distribution. In analysis model I, assuming perfect power control and uniform distribution of users, the equation of blocking probability is calculated and the maximum number of voice and data user is derived in accordance with 1 % blocking probability. In analysis model II, it is analyzed by assuming power control error and non-uniform distribution of users. The result of analysis model I means the upper bound of system capacity in the 5 MHz wideband VSG-CDMA system, and the result of analysis model II shows the lower bound of system capacity. Also, the improved plan of performance for VSG-CDMA system is suggested by the analyzed result according to data activity and the value of $E_b/N_o$ in model II.

• Journal of KIISE:Information Networking
• /
• v.36 no.2
• /
• pp.118-129
• /
• 2009

The ISO 18000-7 Active RFID standard, a single channel system operating in the 433Mhz, faces technical difficulties in supporting some recently introduced application demands because of its low transmission rates and radio interference between readers. We propose a new multi-channel active RFID system operating in the 2.4Ghz. The special feature of the proposed system is that a reader makes use of multiple interfaces to improve its performance like a multi-core processor. However if only a small part of interfaces are actually used, the performance improvement would not meet the expectation. To overcome this problem, a new multi-channel multi-interface active RFID protocol, which balances communication loads among all available interfaces, is necessary. 3 protocols, named as "Aggregated", "LP-Combined", "AP-Balanced", are proposed. Through simulation, we compare them for various conditions by changing number of tags, number of interfaces, tag data size. AP-Balanced shows the best performance and its performance increases almost linearly as the number of interface increases, which meets our expectation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1537-1540
• /
• 2003

MEMS technology with micro scale is complete system utilized as the sensor. micro electro device. The metallization of MEMS is very important to transfer the power operating the sensor and signal induced from sensor part. But in the MEMS structures local stress concentration and deformation is often happened by geometrical shape and different constraint on the metallization. Therefore. this paper studies the effect of supporting type and thickness ratio about thin film thickness of the substrate thickness for the residual stress variation caused by thermal load in the multi-layer thin film. Specimens were made from materials such as Al, Au and Cu and uniform thermal load was applied, repeatedly. The residual stress was measured by FEA and nano-indentation using AFM. Generally, the specimen made of Al induced the large residual stress and the 1st layer made of Al reduced the residual stress about half percent than 2nd layer. Specimen made of Cu and Au being the lower thermal expansion coefficient induce the minimum residual stress. Similarly the lowest indentation length was measured in the Au_Cu specimen by nano-indentation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.5
• /
• pp.532-538
• /
• 2004

MEMS technology applying to the sensors and micro-electro devices is complete system. These microsystems are made by variable processes. Especially, the mentallization process has very important functions to transfer the power operating the sensor and signal induced from sensor part. But in the structures of MEMS the local stress concentration and deformation are often yielded by an irregular geometrical shape and different constraint. Therefore, this paper studies the effect of supporting type and thickness ratio about thin film of the substrate on the residual stress variation when the thermal loads is applied to the multi-layer thin film fabricated by metallization process. Specimens were made from several materials such as Al, Au and Cu. Then, uniform thermal load was applied, repeatedly. The residual stress was measured by FE Analysis and nano-indentation method using AFM. Generally, the specimen made of Al induced the larger residual stress than that of made of other materials. Specimen made of Cu and Au having the low thermal expansion coefficient induces the minimum residual stress. Similarly, the lowest indentation length was measured by nano-indentation method in the Si/Au/Cu specimen. Particularly, clusters are created in the specimen made of Cu by thermal load and the indentation length became increasingly large by cluster formation.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.1
• /
• pp.199-206
• /
• 2013

Recently, the diverse needs of the drivers for in-vehicle infotainment systems are increasing rapidly. As a result, the infotainment systems are equipped with more convenient and human-friendly high-tech features. In this paper, we designed and implemented in-vehicle multimedia infotainment system based on embedded system that was applied various multimedia to in-vehicles. The proposed system can support independent display on each screen for the multi-channel multimedia source based on one processor(1 CPU). Therefore, our system can be reduced costs compared to other systems. This system not only displays the video and audio data in storage devices but also displays CAM, T-DMB, and DVB-T multimedia contents which are supplied in real-time services. Also, our system could multi-screen displays multimedia data in smart phone using Wi-Fi. We expect that in-vehicle infotainment systems like AVN(Audio video navigation) and RSE(Rear Seat Entertainment) could be used in various applications and reduced costs.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.5
• /
• pp.691-708
• /
• 2010

An important issue of supporting multi-users with diverse quality-of-service (QoS) requirements over wireless networks is how to optimize the systematic scheduling by intelligently utilizing the available network resource while, at the same time, to meet each communication service QoS requirement. In this work, we study the problem of a variety of communication services over multi-media heterogeneous cognitive OFDM system. We first divide the communication services into two parts. Multimedia applications such as broadband voice transmission and real-time video streaming are very delay-sensitive (DS) and need guaranteed throughput. On the other side, services like file transmission and email service are relatively delay tolerant (DT) so varying-rate transmission is acceptable. Then, we formulate the scheduling as a convex optimization problem, and propose low complexity distributed solutions by jointly considering channel assignment, bit allocation, and power allocation. Unlike prior works that do not care computational complexity. Furthermore, we propose the FAASA (Fairness Assured Adaptive Sub-carrier Allocation) algorithm for both DS and DT users, which is a dynamic sub-carrier allocation algorithm in order to maximize throughput while taking into account fairness. We provide extensive simulation results which demonstrate the effectiveness of our proposed schemes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.6B
• /
• pp.630-640
• /
• 2009

The thesis suggests hand-held equipment to overhaul for mobile TFT LCD/OLED module of high-performance. The established module equipment to overhaul could distinguish outputting video data to module for distinguishing flicker, but it is impossible with low system. In this thesis, supporting system could check the various supplement functions from bringing equipment to overhaul without changing design of FPGA or H/W the module various size for equipment to overhaul for module of high-performance coincidently. The system includes hand-held equipment to overhaul, test software embedded and software a base personal computer and have designed to output, save, and certify all contents of module test of hand-held equipment to overhaul to interface universal serial bus. Setting up 9 items that represent for efficient verification of the proposed system have been possible confirmation with TFT LCD/OLED module of high-performance, establishment scan time, creation gamma, changing register, supporting interface, and multi inch modules.

• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.3
• /
• pp.259-267
• /
• 2005

The effects of hull flexibility on shaft alignment are growing as ship sizes are increased mainly for container carrier and LNG carrier. In order to consider hull flexibility on a propulsion shafting system, standardization of ship service conditions is necessary because hull deformation is continuously variable according to ship service conditions. How to summarize ship service conditions is suggested based on practically applicable four viewpoints : hull, engine, loading and sea status. Effects of the external forces acting on a ship propulsion shafting system are generally commented. Several design criteria regulated by classification societies are pointed at issue which seems to have Insufficient technical background. A qualitative verification is carried out to point out the invalidity of the assumption of effective supporting position. In this work, an elastic nonlinear multi-supporting bearing system is introduced as a key concept of the elastic shaft alignment. Hertz contact theory is proved to be more proper one than projected area method in calculation of the nonlinear elastic stiffness of the bearing, The squeezing and oil film pressure calculations in the long journal bearing like an after stern tube bearing are recognized as a necessary process for elastic shaft alignment design.

• IE interfaces
• /
• v.16 no.4
• /
• pp.473-484
• /
• 2003

In this paper we deal with the logistics brokerage process in which a logistics agent intermediates between vehicle owners and shippers for matching empty vehicles and freights. Based on the Multi-Criteria Decision Making (MCDM) methodology, the proposed agent system matches the most preferred empty vehicle to the shipper and the most preferred freight to the vehicle owner. In the proposed agent system, an MCDM based sensitivity analysis is also used for supporting decision makers under negotiations. Among various MCDM methodologies, Analytic Hierarchy Process (AHP) is utilized in this paper. Although AHP is one of the most popular MCDM methodologies, AHP needs a number of pair-wise comparisons for assessing alternatives and hence may give excessive decision making burden to the decision makers. In this paper, in order to reduce the decision making burden, a preference function based estimation method is proposed. We can expect that the MCDM based logistics brokerage agent can be used as an efficient and effective tool for e-logistics marketplaces on the internet.