• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10b
• /
• pp.51-54
• /
• 2003

Internal defects such as chevron crack occasionally occur in the process of cold extrusion or cold drawing. It is known that the existence and property of inclusion greatly influences the generation of the internal crack. However, in the plastic working field, research about the effect of the inclusion on the fracture is not theoretically analyzed. This paper describes effects of the physical property of inclusion on the internal fracture generation in the process. Prediction of fracture was evaluated by critical damage value calculated by the equation of Cockcroft & Latham and its change by the inclusion physical property such as size and stiffness was investigated.

• Journal of Ocean Engineering and Technology
• /
• v.12 no.3 s.29
• /
• pp.103-111
• /
• 1998

This paper describes the initial hull form design process which generate a hull form using a neurofuzzy modeling. Neurofuzzy system is to combine the merits of fuzzy inference system and neural networks. Therefore it has structured knowledge representations as well as adaptive capacities. Initial hull form design stage is the process which generate an adoptable hull form from the limited design information and multi-decidions condidering correlations with design factors. It can be assidted efficiently by neurofuzzy system. This paper suggests two methods of an initial hull form generation using the neurofuzzy modeling and B-spline theory. and examines the usefulness of suggested method through its application examples.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.569-572
• /
• 2003

The broadband wireless access industry, which provides high-tate network connections to stationary sites, has matured to the point at which it now has a standard for second-generation wireless metropolitan area networks. IEEE Standard 802.16, with its WirelessMAN air interface, set the stage for widespread and effective deployments worldwide. This paper presents an implementation of media access control that can be applied to BWA (Broadband Wireless Access) system. Medium access control (MAC) is a key issue in multi-access networks where a common channel is shared by many users. The designed MAC prototype roughly consists of MAC Hardware and MAC Software. The MAC Hardware part includes timing process, MAC transmission control, MAC reception control, and CRC/HCS process. The MAC Software part includes control of MAC signaling, network interface, and Physical (PHY) control. The designed MAC protocol will be integrated with the PHY of BWA in future and we can test overall system performance of MAC and PHY.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.5
• /
• pp.444-452
• /
• 2008

This paper presents an overall image processing approach of defect inspection of patterned TFT-LCD panels for the real manufacturing process. A prototype of AOI(Automatic Optical Inspection) system which is composed of air floating stage and multi line scan cameras is developed. Adjacent pattern comparison algorithm is enhanced and used for pattern elimination to extract defects in the patterned image of TFT-LCD panels. New region merging algorithm which is based on border expansion is proposed to identify defects from the pattern eliminated defect image. Experimental results show that a developed AOI system has acceptable performance and the proposed algorithm reduces environmental effects and processing time effectively for applying to the real manufacturing process.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.4
• /
• pp.614-622
• /
• 2003

In this paper, the stress-strain curves of bearing steels at hot working conditions are obtained by hot compression test with a computer controlled servo-hydraulic Gleeble 3800 testing machine and elongations and reductions of area of the bearing steels are also obtained by hot tensile test with a Gleeble 1500 testing machine. Experiments are conducted under the various strain-rates and temperatures and their results are used to obtain the flow stress information. A rigid thermo-viscoplastic finite element method is applied to the multi-stage hot forging process in order to predict temperature distribution of workpiece. The experimental results and the analysis results are used to obtain an optimal hot forging condition.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.641-645
• /
• 2002

In case of aluminum-cased battery, The ratio of height and base of square is generally above the ten times, square-shaped and problem of non-axis symmetry. It is typical model to set up the analysis method of finite element. The reliable analysis of finite element method is suggested, which is used to investigate the possibility that multi-stage deep drawing and ironing used currently is replaced by backward impact extrusion favorable in the respect of cost production and productivity. The influence of parameter was analyzed and compared, which was considered to analyze the process of large deformation plasticity such as extrusion. Die and billet was made as the same shape of finite element model. The results of experiment show good forming without the rupture and wrinkles with the optimum velocity 100mm/sec obtained by analysis.

• Journal of the Korea Society for Simulation
• /
• v.11 no.2
• /
• pp.17-29
• /
• 2002

There is an increasing interest in high-performance A/D(Analog-to-Digital) converters for use in integrated analog and digital mixed processing systems. Pipeline A/D converter architectures coupled with BiCMOS process technology have the potential for realizing monolithic high-speed and high-accuracy A/D converters. In this paper, the design of 12bit pipeline BiCMOS A/D converter presented. A BiCMOS operational amplifier and comparator suitable for use in the pipeline A/D converter. Test/simulation results of the circuit blocks and the converter system are presented. The main features is low distortion track-and-hold with 0-300MHz input bandwidth, and a proprietary 12bit multi-stage quantizer. Measured value is DNL=${\pm}$0.30LSB, INL=${\pm}$0.52LSB, SNR=66dBFS and SFDR=74dBc at Fin=24.5MHz. Also Fabricated on 0.8um BiCMOS process.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.317-320
• /
• 2005

The micro-alloying forging steels have been developed to save energy consumption during forging and subsequent heat treatment stages. The work hardening ability of micro-alloying forging steels is one of major hardening component while it gives severe die damage if the forging process design is poorly set up on the other hand. In the present study, it was tried to characterize three types of micro-alloying forging steels to understand the differences with the conventional low carbon steels used fur cold forging with a spherodizing heat treatment. After forging of a certain forging part with both micro-alloying forging steels and conventional low carbon steel, several mechanical tests were carried out.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2003.09a
• /
• pp.497-504
• /
• 2003

An optimal design method for hybrid structural control system of building structures subject to earthquake excitation is presented in this paper. Designing a hybrid structural control system nay be defined as a process that optimizes the capacities and configuration of passive and active control systems as well as structural members. The optimal design proceeds by formulating the optimization problem via a multi-stage goal programming technique and, then, by finding reasonable solution to the optimization problem by means of a goal-updating genetic algorithm. The process of the integrated optimization design is illustrated by a numerical simulation of a nine-story building structure subject to earthquake excitation. The effectiveness of the proposed method is demonstrated by comparing the optimally designed results with those of a hybrid structural control system where structural members, passive and active control systems are uniformly distributed.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.23 no.54
• /
• pp.13-26
• /
• 2000

Machining route selection to produce parts should be based on shop flow information because of input data at scheduling tasks and is one of the main problem in process planning. This paper addresses the problem of machining route selection in multi-stage process with machine group included a similar function. The model proposed is formulated as 0-1 integer programing considering the relation of parts and machine table size, avaliable time of each machine for planning period, and delivery date. The objective of the model is to minimize the sum of processing, transportation, and setup time for all parts. Genetic algorithm approach is developed to solve this model. The efficiency of the approach is examined in comparison with the method of branch and bound technique for the same problem. Also, this paper is to solve large problem scale and provide it if the multiple machining routes are existed an optimal solution.