• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.12
• /
• pp.1286-1293
• /
• 2008

This paper proposes a realization of robust trajectory tracking for an industrial robot by using PD-sliding mode hybrid control. The PD control has a good performance in the transient period while the sliding mode control has robustness against the system uncertainties. The proposed control method is proposed for the control of a multi-joint robot by taking advantages of both the PD and sliding mode controls. The embodiment of distributed controllers that drive 4-DOF axes has evaluated through experiments with the multi-joint robot AT1. The PD-sliding mode algorithm which is proposed in this paper shows a good performance in the transient period and robustness against disturbances and This paper shows accuracy of end-effector.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.1
• /
• pp.73-80
• /
• 2004

We have developed a general purpose motion controller using an FPGA(Field Programmable Gate Array). The multi-PID controllers and GUI are implemented as a system-on-chip for multi-axis motion control. Comparing with the commercial motion controller LM 629, since it has multi-independent PID controllers, we have several advantages such as space effectiveness, low cost and lower power consumption. In order to test the performance of the proposed controller, motion of the robot hand is controlled. The robot hand has three fingers with 2 joints each. Finger movements show that tracking was very effective. Another experiment of balancing an inverted pendulum on a cart has been conducted to show the generality of the proposed FPGA PID controller. The controller has well maintained the balance of the pendulum.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.138-141
• /
• 2002

In this paper, we developed a Master Hand which has 20 potentiometer for getting grasping data of human hands, a Slave Hand which has 20 DOF and five fingers with servo-motors, and a controller for the 7 DOF Arm with Multi-fingered hands. And, we programmed a 3D simulation S/W which controls a Robot System with Multi-fingered hands. A developed Robot System showed good performance in the grasping of an object with known position and shape.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.6
• /
• pp.619-624
• /
• 2014

This paper introduces a robot-based learning system which is designed to teach multiplication to children. In addition to a small humanoid and a smart device delivering educational content, we employ a type of mixed-initiative operation which provides enhanced multi-modal cognition to the r-learning system through human intervention. To investigate major factors that influence people's intention to use the r-learning system and to see how the multi-modality affects the connections, we performed a user study based on TAM (Technology Acceptance Model). The results support the fact that the quality of the system and the natural interaction are key factors for the r-learning system to be used, and they also reveal very interesting implications related to the human behaviors.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.511-516
• /
• 2000

In order to not only perform as a extreme model under the severe operating condition but also acquire more diverse and advanced control capability utilizing high compliance, active vibration control of a flexible 2-link robot manipulator are investigated. Multi variable-structured frequency shaped optimal sliding mode is proposed for the flexible robot manipulator like control system, whose control variables, an angular motion of joint and vibration of flexible link, have to be controlled simultaneously by one control torque at a driving joint. The control system is divided into two subsystems, a control input related subsystem and an added subsystem. The proposed sliding mode, composed of multi control variables, makes optimized relation between subsystems and a individual control input, thus, the sliding mode controller can compensate whole dynamics of each subsystems simultaneously. And the possibility and effectiveness are verified by vibration control of a manipulator having two flexible links. Simulation and experiment results show that the proposed control scheme achieves the purpose effectively.

• The Journal of Korea Robotics Society
• /
• v.18 no.2
• /
• pp.225-232
• /
• 2023

With the recent increase of multiple robots cooperating in smart manufacturing logistics environments, it has become very important how to predict the safety and efficiency of the individual tasks and dynamically assign them to the best one of available robots. In this paper, we propose a novel task policy learner based on deep relational reinforcement learning for predicting the safety and efficiency of tasks in a multi-robot manufacturing logistics environment. To reduce learning complexity, the proposed system divides the entire safety/efficiency prediction process into two distinct steps: the policy parameter estimation and the rule-based policy inference. It also makes full use of domain-specific knowledge for policy rule learning. Through experiments conducted with virtual dynamic manufacturing logistics environments using NVIDIA's Isaac simulator, we show the effectiveness and superiority of the proposed system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.7
• /
• pp.614-619
• /
• 2013

In multi-robot systems, ultrasonic sensors are widely used for localization and/or obstacle detection. However, conventional ultrasonic sensors have a drawback, that is, the interference problem among ultrasonic transmitters. There are some previous studies to avoid interferences, such as TDMA (Time Division Multiple Access) and CDMA (Code Division Multiple Access). In multiple autonomous mobile robots systems, the Doppler-effect has to be considered because ultrasonic transceivers are attached to the moving robots. To overcome this problem, we find out the ASK (Amplitude Shift Keying)-CDMA technique is more robust to the Doppler-effect than the BPSK (Binary Phase Shift Keying)-CDMA technique. In this paper, we propose a new code-expression method and a Monte-Carlo based algorithm that optimizes the ultrasonic code combination in the ASK-CDMA ultrasonic system. The experimental results show that the proposed algorithm improves the performance of the ultrasonic multiple accessing capacity in the ASK-CDMA ultrasonic system.

• The Journal of Korea Robotics Society
• /
• v.18 no.1
• /
• pp.10-17
• /
• 2023

Recently, robots have been actively utilized for logistics and delivery services in various places such as restaurants, hotels, and hospitals. In addition, it provides a safer environment, convenience, and cost efficiency to the customers. However, when it comes to autonomous delivery in a multi-floor environment, the task is still challenging. Especially for wheeled mobile robots, it is necessary to deal with elevators to perform the last-mile delivery services. Therefore, we present a multi-floor route planning algorithm that enables a wheeled mobile robot to traverse an elevator for the delivery service. In addition, an elevator boarding mission algorithm was developed to perceive the drivable region within the elevator and generate a feasible path that is collision-free. The algorithm was tested with real-world experiments and was demonstrated to perform autonomous postal delivery service in a multi-floor building. We concluded that our study could contribute to building a stable autonomous driving robot system for a multi-floor environment.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.612-616
• /
• 1997

In this paper, two kinds of controller are proposed for a soccer robot system.. One for Supervisor and defense mode, and the other for attack mode. Robot soccer game has very dynamic characteristics. Furthermore, there exist competitions between agents. The soccer-playing robot should take an appropriate action according to its surroundings. Initially, an attack mode controller using a vector field concept is designed, then a supervisor and a defense mode controller are designed with a Petri-net. The efficiency and applicability of the proposed controllers are demonstrated through a real robot soccer game(MiroSot 97).

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.337-339
• /
• 2007

This paper proposes a new paradigm for cooperation of multi-robot system for home service. For localization of each robot. the master robot collects information of location of each robot based on communication of RFID tag on the floor and RFID reader attached on the bottom of the robot. The Master robot communicates with slave robots via wireless LAN to check the motion of robots and command to them based on the information from slave robots. The operator may send command to slave robots based on the HRI(Human-Robot Interaction) screened on masted robot using information from slave robots. The cooperation of multiple robots will enhance the performance comparing with single robot.