• 대한기계학회논문집B
• /
• 제29권9호
• /
• pp.988-996
• /
• 2005

Flame structure and extinction mechanism of counterflow methane/air non-premixed flame diluted with nitrogen are studied by NASA 2.2 s drop tower experiments and two-dimensional numerical simulations with finite rate chemistry and transport properties. Extinction mechanism at low strain rate is examined through the comparison among results of microgravity experiment, 1D and 2D simulations with a finite burner diameter. A two-dimensional simulation in counterflow flame especially with a finite burner diameter is shown to be very important in explaining the importance of multidimensional effects and lateral heat loss in flame extinction, effects that cannot be understood using a one-dimensional flamelet model. Extinction mechanism at low strain rate is quite different from that at high strain rate. Low strain rate flame is extinguished initially at the outer flame edge, the flame shrinks inward, and finally is extinguished at the center. It is clarified from the overall fractional contribution by each term in energy equation to heat release rate that the contribution of radiation fraction with 1D and 2D simulations does not change so much and the overall fractional contribution is decisively attributed to radial conduction ('lateral heat loss'). The experiments by Maruta et at. can be only completely understood if multi-dimensional heat loss effects are considered. It is, as a result, verified that the turning point, which is caused only by pure radiation heat loss, has to be shifted towards much lower global strain rate in microgravity flame.

• 정보처리학회논문지A
• /
• 제15A권3호
• /
• pp.135-140
• /
• 2008

본 논문은 중복 다치논리(redundant multi-valued logic)를 이용하여 초고속 디멀티플렉서(demultiplexer)를 CMOS 회로로 설계하였다. 설계한 회로는 중복 다치논리를 이용하여 직렬 이진 데이터를 병렬 다치 데이터로 변환하고 이를 다시 병렬 이진 데이터로 변환한다. 중복 다치논리는 중복된 다치 데이터 변환으로써 기존 방식 보다 더 높은 동작속도를 얻을 수 있다. 구현한 디멀티플렉서는 8개의 적분기로 구성되어 있으며, 각 적분기는 누적기, 비교기, 디코더, D 플립플롭으로 구성된다. 설계한 회로는 0.18um 표준 CMOS 공정으로 구현하였으며 HSPICE 시뮬레이션을 통해 검증하였다. 본 논문의 디멀티플렉서의 최대 데이터 전송률은 20 Gb/s이고 평균 전력소모는 58.5 mW이다.

• 정보처리학회논문지C
• /
• 제13C권2호
• /
• pp.235-240
• /
• 2006

SCTP(Stream Control Transmission Protocol) 프로토콜의 '멀티홈잉(multi-homing)' 특성을 통해 SCTP 응용은 두 개 이상의 IP 주소를 통해 데이터를 전송할 수 있다. 본 논문에서는 리눅스 기반 테스트베드 환경에서 SCTP 멀티홈잉 특성이 처리율 성능에 미치는 영향을 분석한다. 실험을 위해 MSTNET 에뮬레이터를 활용하여 다양한 패킷손실율, 링크대역폭, 및 전송지연 환경을 구성하여 SCTP 처리율을 비교 분석 하였다. 실험 결과, 패킷 손실이 존재하는 망 환경에서 SCTP 멀티흠잉은 단일홈잉 경우에 비해 높은 성능을 보이며, 이는 SCTP 멀티홈잉에서 대체경로 재전송에 의한 효과로 볼 수 있다. 반면에, 링크대역폭 및 전송지연 요소는 상대적으로 SCTP 처리율 성능에 미치는 효과가 미미하였다.

• 한국자동차공학회논문집
• /
• 제9권2호
• /
• pp.59-66
• /
• 2001

This experimental study is to investigate the flow characteristics of the multi-hole nozzle used in the fuel injection system of a heavy-duty diesel engine. A multi-hole diesel nozzle with a 2-spring nozzle holder was used in this study and without changing the total orifice exit area, its hole number varied from 3($d_n$=0.42mm) to 8($d_n$=0.25mm). The injection pressure and needle lift were measured and Bosch type injection rates measurement system was used. The discharge flowrates of each orifice in the multi-hole nozzle changed by the flow conditions inside the nozzle sac hole. In case that pump speed and injection quantity were low, the orifice located in the vertex of nozzle tip had a great deal of injection quantity compared with that of others. As the increment of multi-hole number, the injection duration and the mean injection pressure decrease. The mean and peak injection rates, however, increase. Actually, the mean flow coefficient(${C_d}_{(mean)}$) increases, too. The flow coefficient of the multi 8 hole was evaluated as Cd(mean)=0.74 and that is the maximum value among the examined conditions.

• Journal of Animal Science and Technology
• /
• 제62권2호
• /
• pp.276-291
• /
• 2020

This study was conducted to investigate behavioral changes in laying hens (Hy-Line Brown) after transfer to a multi-tier system from the floor system and to examine their production performance. The hens were randomly divided into two groups and were allocated to the multi-tier system and the floor system at a commercial farm. Behavior of the laying hens was recorded by CCD (charge-coupled device) cameras and a digital video recorder. The data were scanned every 2 min to obtain an instantaneous behavioral sample or were immediately counted whenever the hens exhibited a designated behavior. Behavior changed dramatically during the first seven days. Egg production was higher in the multi-tier system, while cracked and dirty eggs were more frequent in the floor system (p < 0.05). No differences in mortality rate or egg quality were observed between the groups. In conclusion, the hens needed at least seven days to adapt to the multi-tier system. The multi-tier system was more efficient than the floor system in terms of production performance.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.677-694
• /
• 2009

While the budget has been allocated more for repairs and reinforcements, casualties are gradually increased due to slope disaster. Slope disaster causes road damaged as well as casualties. It also causes significant social and economic loss. The measurement device, which is installed inside ground of slope like inclinometer, has the high loss rate when slope is being slided. The electric type and the vibrating wire type have low durability because of corrosion. To cover the demerit of the present slope monitoring, the measurement method using the Multi-Antenna GPS has been developed. The Multi-Antenna GPS has been installed in the local slope as the regular monitoring system for slope. Although the initial cost of the Multi-Antenna GPS for installation is high, the additional cost is low. So it is the suitable method for large slope. The regular monitoring system using the Multi-Antenna GPS is the suitable measurement method for watching slope collapse, which is occurred widely, because it is economical, has high durability, and collects data with high resolution.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권8호
• /
• pp.4041-4059
• /
• 2019

Key establishment method based on channel reciprocity for time division duplex (TDD) system has earned a vital consideration in the majority of recent research. While most of the cellular systems rely on frequency division duplex (FDD) systems, especially the 5G network, which is not characterized by the channel reciprocity feature. This paper realizes the generation of a group secret key for multi-terminals communicated through a wireless network in FDD mode, by utilizing the nature of the physical layer for the wireless links between them. I consider a new group key generation approach, which using bitwise XOR with a modified pairwise secret key generation approach not based on the channel reciprocity feature. Precisely, this multi-node secret key agreement technique designed for three wireless network topologies: 1) the triangle topology, 2) the multi-terminal star topology, and 3) the multi-node chain topology. Three multi-node secret key agreement protocols suggest for these wireless communication topologies in FDD mode, respectively. I determine the upper bound for the generation rate of the secret key shared among multi-node, for the three multi-terminals topologies, and give numerical cases to expose the achievement of my offered technique.

• 로봇학회논문지
• /
• 제17권1호
• /
• pp.25-31
• /
• 2022

Moving among multiple floors is one of the most challenging tasks for indoor autonomous robots. Most of the previous researches for indoor mapping and localization have focused on singular floor environment. In this paper, we present an algorithm that creates a multi-floor map using 3D point cloud. We implement localization within the multi-floor map using a LiDAR and an IMU. Our algorithm builds a multi-floor map by constructing a single-floor map using a LOAM-based algorithm, and stacking them through global registration that aligns the common sections in the map of each floor. The localization in the multi-floor map was performed by adding the height information to the NDT (Normal Distribution Transform)-based registration method. The mean error of the multi-floor map showed 0.29 m and 0.43 m errors in the x, and y-axis, respectively. In addition, the mean error of yaw was 1.00°, and the error rate of height was 0.063. The real-world test for localization was performed on the third floor. It showed the mean square error of 0.116 m, and the average differential time of 0.01 sec. This study will be able to help indoor autonomous robots to operate on multiple floors.

• 한국통신학회논문지
• /
• 제36권1A호
• /
• pp.8-18
• /
• 2011

발광 다이오드와 같은 광원을 이용하여 조명과 통신의 두가지 기능을 동시에 이용할 수 있는 가시광 무선 통신은 최근 초고속 개인용 무선 네트워크에서 각광을 받고 있다. 광원의 제한된 대역폭으로 인하여 무선 광채널에서 전송률을 향상시키는 것이 이슈로 대두되는 가운데, 본 논문에서는 전송률을 향상시키는 기법으로써 다중 입출력 무선 광채널에서 두 개의 데이터 스트림을 지원하기 위해 고유값 분해를 이용한 공간 다중화 시스템을 설계한다. 채널의 변화에 따라 적응적 변조 기법을 적용하여 주파수 효율을 높이기 위해 펄스 진폭 변조 기법을 이용한다. 본 논문에서는 세기 변조를 이용한 변조 기법의 세 가지 제한 조건인 비음수성, 총 광출력값, 비트 오류율에 대하여 주파수 효율성을 향상시키기 위해 광출력값, 오프셋값, 변조 크기를 적응적으로 할당하기 위한 기법을 이론적으로 제안한다. 모의 실험 결과를 통해 본 논문의 제안 기법이 각 데이터 스트림에 광출력값을 동일하게 할당하는 기법에 비해 성능 향상을 이룰 수 있다는 것을 보인다.

• 방송공학회논문지
• /
• 제23권3호
• /
• pp.361-368
• /
• 2018

자율주행 자동차의 연구가 빠르게 발전하는 가운데 보행자 검출에 대한 연구 또한 성공적으로 진행되고 있다. 그러나 대부분의 연구에서 사용되는 데이터셋이 컬러영상을 기반하고 있고 또한 보행자의 인식이 상대적으로 쉬운 영상이 많다. 컬러 영상의 경우 보행자가 빛에 노출되는 정도에 따라 영상에 제대로 포착이 되지 않을 수 있고 이로 인해 기존 방식들로는 이러한 보행자를 제대로 검출하지 못하는 상황이 발생한다. 따라서 본 논문에서는 DNN (deep neural network) 기반 컬러 영상과 열 영상을 이용한 다중 스펙트럼 보행자 검출 기법을 제안하고자 한다. 기존의 SSD (single shot multibox detector) 기법을 기반으로 하여 컬러 영상과 열 영상을 동시에 활용하는 퓨전 네트워크 구조를 제안한다. 실험은 KAIST의 데이터셋을 이용하여 실시하였고 제안한 기법인 SSD-H (SSD-Halfway fusion)의 방식이 KAIST 보행자 검출기준의 기준치보다 18.18% 낮은 miss rate를 획득하였고 또한 기존 halfway fusion 기법에 비해 최소 2.1% 낮은 miss rate를 획득하였다.