• 한국물환경학회지
• /
• 제33권4호
• /
• pp.449-459
• /
• 2017

In Geum River of Korea, three multi-purpose weirs were built at the downstream of Daecheong Reservoir during the Four Major River Restoration Project (FMRRP). The weirs have altered the hydraulic characteristics of the river, and consequently transformed the large areas of flowing ecosystem to deep and wide stagnant environment. In every summer, a thermal stratification occurred near the Baekje Weir having mean depth of 4.0 m, and the surface algal blooms dominated by buoyant cyanobacteria have been frequently formed after the FMRRP. The objective of this study was to investigate the relationship between flow velocity and thermal stability of the waterbody using a three-dimensional (3D) hydrodynamic model (EFDC+) after calibration against the thermistor chain data obtained in 2014. A new Sigma-Zed vertical grid system of EFDC+ that minimize the pressure gradient errors was used to better simulate the thermodynamics of the waterbody. The model reasonably simulated the vertical profiles of the observed water temperatures. The vertical mean flow velocity and the Richardson Number (Ri) that represents the stability of waterbody were estimated for various management water levels and flow rates scenarios. The results indicated that the thermal stability of the waterbody is mostly high ($Ri{\gg}0.25$) enough to establish stratification, and largely depend on the flow velocity. The critical flow velocity that can avoid a persistent thermal stratification was found to be approximately 0.1 m/s.

• 천문학회보
• /
• 제43권1호
• /
• pp.41.2-41.2
• /
• 2018

EL CVn-type eclipsing binaries are composed of a massive A-type main-sequence primary star and a hotter B-type secondary one. These are worthy of particular attention because the secondary stars are rare objects to be extremely low-mass white dwarf precursors (ELM proto-WD) with the mass of ${\leq}0.2M_{\odot}$, evolving to higher effective temperatures and higher surface gravities. A few of them were discovered to show multi-periodic pulsations in one or both components. We monitored one of these rare and interesting objects, J0247-25 (=1SWASP J024743.37-251549.2), at two KMTNet sites of SAAO in South Africa and SSO in Australia. The observations were performed with the KMTNet 1.6m telescopes and pre-science 4K CCD cameras during the system test run from July to November 2014. Using the photometric data obtained for a total of 23 nights, we constructed well-defined eclipsing light curves in B/V-bands and derived absolute parameters (mass and radius, etc.) of each binary component. After subtracting model eclipsing curves from the data, we detected seven frequencies with 33~53 cycles per day (c/d) and identified them to be Delta Sct-type pulsations originated from the A-type primary component. Five frequencies were turned out to be excited by rotational splitting of non-radial pressure modes, enabled us to investigate rotational properties. We could not detect any frequency higher than 100 c/d, implying that pulsation amplitudes of the proto-WD secondary decrease greatly.

• 대한치과기공학회지
• /
• 제27권1호
• /
• pp.79-88
• /
• 2005

This study was performed to investigate the surface properties of electrochemically oxidized pure niobium by anodic oxide and hydrothermal treatment technique. Niobium specimens of $10\times10mm$ in dimension were polished sequentially from #600, #800, #1000 emery paper. The surface pure niobium specimens were anodized in an electrolytic solution that was dissolved calcium and phosphate in water. The electrolytic voltage was set in the range of 250 V and the current density was 10 $mA/cm^2$. The specimen was hydrothermal treated in high-pressure steam at 300$^{\circ}C$ for 2 hours using an autoclave. Then, specimens were immersed in the Hanks' solution with pH 7.4 at 37$^{\circ}C$ for 30 days. The surface of specimen was characterized by scanning electron microscope(SEM), energy dispersive X-ray microanalysis(EDX), potentiostat/galvanostat test, and cytotoxicity test. The results obtained was summarized as follows; According to the result of measuring corrosion behavior at 0.9% NaCl, corrosion resistance was improved more specimens treated with anodic oxide than in hydrothermal treated ones. The multi-porous oxide layer on surface treated through anodic oxidation showed a structure that fine pores overlap one another, and the early precipitation of apatite was observed on the surface of hydrothermal treated samples. According to the result of EDX after 30 days deposition in Hanks' solution, Ca/P was 1.69 in hydrothermal treated specimens. In MTT test, specimens treated through anodic oxidation and hydrothermal treated ones showed spectrophotometer similar to that of the control group. Thus no significant difference in cytotoxicity was observed (P>0.05).

• 한국지반공학회논문집
• /
• 제33권4호
• /
• pp.47-56
• /
• 2017

잔교식 안벽의 내진설계는 보통 다중모드 스펙트럼 해석과 같은 단순 동해석 방법을 적용하여 수행된다. 이러한 단순 해석법은 구조물의 한계상태를 평가하는데 유용할 수 있다. 그러나, 과거에 발생한 잔교식 안벽의 지진피해사례를 살펴보면, 기초지반의 변형 또는 지반-말뚝 사이의 동적 상호작용이 구조물의 전체 거동에 큰 영향을 미치는 것으로 나타났다. 이러한 거동은 지반-말뚝-구조물 동적 상호작용을 정밀하게 모사할 수 있는 비선형 유효응력 해석을 수행하여 평가할 수 있다. 본 연구에서는 잔교식 안벽의 내진성능을 평가할 수 있는 3차원 수치 모델링 기법을 선정하고, 이를 Hyogoken Nambu 지진(1995)시 고베항의 잔교식 안벽 피해사례에 적용하여 그 적용성을 검증하였다. 해석결과, 본 연구에서 적용한 수치 모델링 기법이 안벽의 지진피해 거동을 잘 모사할 수 있으며, 지반의 과잉간극수압증가 및 지반-구조물과의 동적 상호작용이 안벽의 지진거동에 큰 영향을 주는 것으로 나타났다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제13권10호
• /
• pp.4999-5002
• /
• 2012

Introduction: There is epidemiological evidence indicating that the metabolic syndrome increases the risk of colorectal cancer. Since there is little information about this issue in Iran, the present study was conducted to evaluate prevalence of metabolic syndrome and its components in patients with colorectal cancer. Material and Methods: This cross-sectional survey involved 200 patients with a new diagnosis of colorectal cancer. Demographic information of patients was collected through the interview with them. Components of metabolic syndrome including fasting glucose serum, triglyceride, high density lipoprotein, blood pressure and waist circumference were measured for all of the patients. Results: A total of 72 colorectal cancer patients (36%) met metabolic syndrome criteria with rates of 76% for women and 24% for men. BMI in metabolic syndrome patients was higher than other colorectal cancer patients. Disease history including hypertension, diabetes and cardiovascular disease was most frequent in metabolic syndrome patients. Pathological characteristics of colorectal cancer were not significantly associated with the disease. Conclusion: The findings of present study indicated that the prevalence of metabolic syndrome in CRC patients is relatively high. Therefore, further analytical and multi centric studies are needed to better understand the role of metabolic syndrome in development of CRC in Iran. If this association is confirmed in future studies, metabolic syndrome patients should be considered in CRC screening programs.

• 드라이브 ㆍ 컨트롤
• /
• 제14권2호
• /
• pp.23-29
• /
• 2017

In this study, a flexible multi-body dynamic simulation model of a knuckle boom crane is developed to evaluate the stress of spindle and rack gears under dynamic working conditions. It is difficult to predict potential critical damage to a knuckle boom crane if only the static condition is considered during the development process. To solve this issue, a severe working scenario (high speed with heavy load) was simulated as a boundary condition for testing the integrity of the dynamic simulation model. The crane gear model is defined as a flexible body so contact analysis was performed. The functional motion of a knuckle boom crane is generated by applying forces at each end of the rack gear, which was converted from hydraulic pressure measured for the experiment. The bending and contact stress of gears are theoretically calculated to validate the simulation model. In the simulation, the maximum stress of spindle and rack gears are observed when the crane abruptly stops. Peak impact force is produced at the contact interface between pinion and rack gears due to the inertia force of the boom. However, the maximum stress (bending/contact) of spindle and rack are under the yield stress, which is safe from damage. By using the developed simulation model, the experiment process is expected to be minimized.

• 한국정보시스템학회지:정보시스템연구
• /
• 제12권2호
• /
• pp.57-72
• /
• 2003

The purpose of this paper is to propose the modeling of multiagent based SCM and implement the prototype in the Internet environment. SCM process follows the supply chain operations reference (SCOR) model which has been suggested by Supply Chain Counsil. SCOR model has been positioned to become the industry standard for describing and improving operational process in SCM. Five basic processes, plan, source, matte, deliver and return are defined in the SCOR model, through which a company establishes its supply chain competitive objectives. A supply chain is a world wide network of suppliers, factories, warehouses, distribution centers and retailers through which raw materials are acquired, transformed or manufactured and delivered to customers by autonomous or semiautonomous process. With the pressure from the higher standard of customer compliance, a frequent model change, product complexity and globalization, the combination of supply chain process with an advanced infrastructure in terms of multiagent systems have been highly required. Since SCM is fundamentally concerned with coherence among multiple decision makers, a multiagent framework based on explicit communication between constituent agents such as suppliers, manufacturers, and distributors is a natural choice. Multiagent framework is defined to perform different activities within a supply chain. Dynamic and changing functions of supply chain can be dealt with multi-agent by cooperating with other agents. In the areas of inventory management, remote diagnostics, communications with field workers, order fulfillment including tracking and monitoring, stock visibility, real-time shop floor data collection, asset tracking and warehousing, customer-centric supply chain can be applied and implemented utilizing multiagent. In this paper, for the order processing event between the buyer and seller relationship, multiagent were defined corresponding to the SCOR process. A prototype system was developed and implemented on the actual TCP/IP environment for the purchase order processing event. The implementation result assures that multiagent based SCM enhances the speed, visibility, proactiveness and responsiveness of activities in the supply chain.

• 대한기계학회논문집B
• /
• 제30권6호
• /
• pp.553-559
• /
• 2006

Most diesel injector, which is currently used in high-pressure common rail fuel injection system of diesel engine, is driven by the solenoid coil energy for its needle movement. The main disadvantage of this solenoid-driven injector is a high power consumption, high power loss through solenoid coil and relatively fixed needle response's problem. In this study, a prototype piezo-driven injector, as a new injector mechanism driven by piezoelectric energy based on the concept of inverse piezo-electric effect, has been designed and fabricated to know the effect of piezo-driven injection processes on the diesel spray structure and internal nozzle flow. Firstly we investigated the spray characteristics in a constant volume chamber pressurized by nitrogen gas using the back diffusion light illumination method for high-speed temporal photography and also analyzed the inside nozzle flow by a fully transient simulation with cavitation model using VOF(volume of fraction) method. The numerical calculation has been performed to simulate the cavitating flow of 3-dimensional real size single hole nozzle along the injection duration. Results were compared between a conventional solenoid-driven injector and piezo-driven injector, both equipped with the same micro-sac multi-hole injection nozzle. The experimental results show that the piezo-driven injector has short injection delay and a faster spray development and produces higher injection velocity than the solenoid-driven injector. And the predicted simulation results with the degree of cavitation's generation inside nozzle for faster needle response In a piezo-driven injector were reflected to spray development in agreement with the experimental spray images.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권5호
• /
• pp.572-579
• /
• 2006

Accurate heat release analysis based on the cylinder pressure trace is important for evaluating combustion process of diesel engines. However, traditional single-zone heat release models (SZM) have significant limitations due mainly to their simplified assumptions of uniform charge and homogeneity while neglecting local temperature distribution inside cylinder during combustion process. In this study, a heat release analysis based on single-zone model has been evaluated by comparison with computational simulation result using Fire-code, which is based on multidimensional model (MDM). The limitations of the single-zone assumption have been estimated, To overcome these limitations, an improved model that includes the effects of spatial non-uniformity has been applied. From this improved single-zone heat release model (Improved-SZM), two effective values of specific heat ratios, denoted by ${\gamma}_V$ and ${\gamma}_H$ in this study, have been introduced. These values are formulated as the function of charge temperature changing rate and overall equivalence ratio. Also, it is applied that each equation of ${\gamma}_V$ and ${\gamma}_H$ has respectively different slopes according to several meaningful periods during combustion progress. The heat release analysis results based on improved single-zone model gives a good agreement with FIRE-code results over the whole range of operating conditions of target engine, Hyundai HiMSEN H21/32.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.407-407
• /
• 2014

Nanotechnology, especially vertically grown silicon nanowires, has gotten great attentions in biology due to characteristics of one dimensional nanostructure; controllable synthetic structure such as lengths, diameters, densities. Silicon nanowires are promising materials as nanoelectrodes due to their highly complementary metal-oxide-semiconductor (CMOS) - and bio-compatibility. Silicon nanowires are so intoxicated that are effective for bio molecular delivery and electrical stimulation. Vertical nanowires with integrated Au tips were fabricated for electrical intracellular interfacing with PC-12 cells. We have made synthesized two types of nanowire devices; one is multi-nanowires electrode for bio molecular sensing and electrical stimulation, and the other is single-nanowires electrode respectively. Here, we demonstrate that differentiation of Nerve Growth Factor (NGF) treated PC-12 cells can be promoted depending on different magnitudes of electrical stimulation and density of Si NWs. It was fabricated by both bottom-up and top-down approaches using low pressure chemical vapor deposition (LPCVD) with high vacuuming environment to electrically stimulate PC-12 cells. The effects of electrical stimulation with NGF on the morphological differentiation are observed by Scanning Electron Microscopy (SEM), and it induces neural outgrowth. Moreover, the cell cytosol can be dyed selectively depending on the degree of differentiation along with fluorescence microscopy measurement. Vertically grown silicon nanowires have further expected advantages in case of single nanowire fabrication, and will be able to expand its characteristics to diverse applications.