• 대한조선학회논문집
• /
• 제42권5호
• /
• pp.479-486
• /
• 2005

The final goal of shift alignment design is that the bearing reaction forces or mean pressures are within design boundaries for various service conditions of a ship. However, it is found that calculated bearing load can be substantially variable according to the locations of the effective support points of after sterntube bearing which are determined by simple calculation or assumption suggested by classification societies. A new analysis method for shaft alignment calculation is introduced in order to resolve these problems. Key concept of the new method is featured by adopting both nonlinear elastic and multi-support elements to simulate a bearing support Hertz contact theory is basically applied for nonlinear elastic stiffness calculation instead of the projected area method suggested by most of classification societies. Three loading conditions according to the bearing offset and the hydrodynamic moment and twelve models according to the locations of the effective support points of sterntube bearings are prepared to carry out quantitative verifications for an actual shafting system of 8000 TEU class container vessel. It is found that there is relatively large difference between assumed and calculated effective support points.

• 방송공학회논문지
• /
• 제14권6호
• /
• pp.733-741
• /
• 2009

디지털 통신 시스템에서는 대역폭과 전력을 효율적으로 사용하면서 신뢰성 높은 데이터 전송을 요구한다. 본 논문에서는 다중 반송파 방식을 사용하는 시스템에서 반송파의 직교성을 이용하여 다차원 성상도를 구현하고 전력 소비가 큰 성상 포인트의 위치를 재배치하여 평균 소비 전력을 감소시킬 수 있는 기술을 제안한다. 기존의 2차원 QAM 변조 방식을 N개의 부반송파를 사용하여 다차원 QAM 형태로 단순하게 변환하면 2 N차원 큐브 형태의 성상 포인트가 구성되는데, 전력 소비가 많은 최외각 성상 포인트들을 효율적으로 재배치하면 전력 소비를 최소화할 수 있는 2 N차원 구 형태의 성상도를 구성할 수 있다. 이와 같은 방식으로 16-QAM부터 2,048-QAM까지의 2차원 성상도를 다차원으로 변환하여 구성하고 전산모의실험을 통해 얻을 수 있는 평균 소비 전력 이득 값을 비교 분석하였다. 차원을 높일수록 재배치 성상 포인트들이 증가하므로 평균 소비 전력 이득 값이 커지는 것을 알 수 있다. 하지만 차원 증가에 따른 이득의 증가비율은 로그 형태를 가지고 있기 때문에 QAM의 성상 포인트 개수에 따라 일정한 이득값에 수렴하게 되고 수렴 값을 바탕으로 적정 다차원 성상도를 유도할 수 있다. 본 논문에서 제안한 방법으로 데이터를 전송하는 것은 하드웨어 복잡도 증가가 거의 없이 소비 전력의 효율성을 높이는데 효과적이다.

• 소음진동
• /
• 제5권4호
• /
• pp.555-563
• /
• 1995

This paper proposes the method of antiresonance frequency analysis of multi-input multi-output system. The structural dynamic modification techniques by antiresonance frequency analysis are also applied to reduce the undertest at specimen attachment points on the fixture in environmental vibration test, which is resulted from the inconsistency of antiresonance frequencies at any specified points. Several computer simulations show that the proposed method can remove the undertest problem which is not removed in conventional vibration test control. And the effectiveness of the method is verified with the impact hammer excitation of aluminium fixture model.

• 한국멀티미디어학회논문지
• /
• 제23권2호
• /
• pp.166-173
• /
• 2020

Multi-view images, which are widely used for providing free-viewpoint services, can enhance the quality of synthetic views when the number of views increases. However, there needs an efficient representation method because of the tremendous amount of data. In this paper, we propose a method for generating point cloud data for the efficient representation of multi-view color and depth images. The proposed method conducts sequential reconstruction of point clouds at each viewpoint as a method of deleting duplicate data. A 3D point of a point cloud is projected to a frame to be reconstructed, and the color and depth of the 3D point is compared with the pixel where it is projected. When the 3D point and the pixel are similar enough, then the pixel is not used for generating a 3D point. In this way, we can reduce the number of reconstructed 3D points. Experimental results show that the propose method generates a point cloud which can generate multi-view images while minimizing the number of 3D points.

• 한국음향학회지
• /
• 제23권4호
• /
• pp.323-332
• /
• 2004

음상정위를 제어하는 한 방법으로 음원으로부터 모의하고자 하는 두 귀까지의 머리전달함수 (HRTF)를 모의하는 방법이 유효하다. 그러나, 이 방법을 이용한 경우, 모의계를 설계할 때의 수음점과 청취시의 수음점이 완전하게 일치하는 경우에는 정밀한 모의가 가능하나, 청취시에 머리가 이동한 경우에는 모의정도가 크게 저하하는 문제점이 있다. 이러한 문제점을 해결하기 위해, 본 논문에서는 외이도의 입구뿐만 아니라 그 근방의 복수개의 점의 음압을 제어하는 것에 의해 머리가 다소 이동하더라도 제어가 가능하도록 한 모의계의 구성 방법을 제안한다. 본 논문에서는 이 방법을 이용해 머리전달함수를 모의한 경우에 대하여 물리적인 모의정도와 청감상의 음상정위의 정확도에 대하여 종래의 방법과 비교하여 실험했다. 그 결과 복수개의 점에 있어서의 온압을 제어하는 것에 의해 청취위치가 6 cm 정도까지 이동한 경우에도 수평면상에서 방향의 지각 오차를 종래의 방법보다 적게 할 수 있다는 것을 인간을 대상으로 한 청취실험을 통해 증명했다.

• Management Science and Financial Engineering
• /
• 제18권1호
• /
• pp.49-53
• /
• 2012

A novel method of transient stability analysis is presented in this paper. The proposed method extracts data points near the basin-of-attraction boundary and then builds a support vector machine (SVM) model learned from the generated data. The constructed SVM classifier has been shown to reduce dramatically the conservativeness of the estimated basin of attraction.

• 대한의용생체공학회:의공학회지
• /
• 제27권6호
• /
• pp.409-417
• /
• 2006

Research on neural circuit is a difficult area due to complexity and inaccessibility. Due to recent developments, the research using multi-electrode array of cells or tissues has become an important research area. However, there are some difficulties to decode the submerged meaning from huge and complex neural data. Moreover, it needs a harmonic collaboration between informatics and bioscience. In this paper, we have developed a custom-designed signal processing technique for multi-electrode array measured neural responses induced by electrical stimuli to the hippocampal tissue slices of the rat brain. The raw data from hippocampal slice using the multi-electrode array system were saved in a computer. Then we estimated characteristic points in each channel and calculated the total activity. To estimate the points, we used the Polynomial Fitting Approximation Method. Using the calculated total activity, we could provide the histogram or pseudo-image matrix to help interpretation of results.

• 자원환경지질
• /
• 제26권2호
• /
• pp.207-215
• /
• 1993

In modem petroleum reservoir engineering, the characterization of reservoir heterogeneities is very important to accurately understand and predict reservoir production performance. Formation evaluation for the description of reservoir is generally conducted by performing the analysis of well logging, core testing, and well testing. However, the measured data points by well logging or core testing are in general very sparse and hence reservoir properties should be interpolated and extrapolated from measured points to uncharacterized areas. In assigning the data for the unknown points, simple averaging technique is not feasible as optimum estimation method since this method does not account the spatial relationship between the data points. The main goal of this work is to develop PC-version of multi-purpose geostatistical model in which several stages are systematically proceeded. In the development of model, the simulator employs a automatic selection of semivariogram function such as exponential or spherical model with the best values of $R^2$. The simulator also implements a special algorithm for the fitting of semivariogram function to experimental sernivariogram. The special algorithm such as trial and error scheme is devised since this method is much more reliable and stable than Gauss-Newton method. The simulator has been tested under stringent conditions and found to be stable. Finally, the validity and the applicability of the developed model have been studied against some existing actual field data.

• 제어로봇시스템학회논문지
• /
• 제19권10호
• /
• pp.886-890
• /
• 2013

In this paper, a 3D coordinates acquisition method for a mechanical assembly is developed by using multiview X-ray images. The multi-view X-ray images of an object are obtained by a rotary table. From the rotation transformation, it is possible to obtain the 3D coordinates of corresponding edge points on multi-view X-ray images by triangulation. The edge detection algorithm in this paper is based on the attenuation characteristic of the X-ray. The 3D coordinates of the object points are represented on a graphic display, which is used for the inspection of a mechanical assembly.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.217-219
• /
• 1998

Korea Water Resources Corporation (KOWACO) annually supplies about 2 billion Kwh and 7.3 billion $m^3$ with its 10 multi purpose dams and 20 water supply offices. For the proper control and management of the above utilities, sequential control equipment and SCADA/DCS have been operated and maintained. In this paper, 8 control system evaluations for hydropower dam, water supply, electric power and subway projects during 1984-1997 were reviewed and analyzed. The systematic evaluation method has been established in the points of the purpose, method, procedure, evaluation team, evaluation criteria, total evaluation table and the contents of final recommendation report. With keeping in mind the essential points, it is expected for the more effective and fair evaluation of bids.