• 한국정보통신학회논문지
• /
• 제9권7호
• /
• pp.1445-1451
• /
• 2005

홈 네트워크란 일반적으로 PC를 비롯한 가정 내의 가전기기들이 하나의 네트워크로 통합되어 통신이 가능하도록 하는 것을 의미한다. 21세기에 들어서 홈 네트워크 환경을 위한 여러 가지 기술들이 제시되었다. 대표적으로 HomePNA, IEEE1394, ethernet lan, 블루투스 등이 있다. 일반적으로 홈 네트워크를 구현하는데 있어 가전기기간 데이터를 전송 할 경우 표준 직렬 인터페이스인 RS232를 이용한다. 그러나 RS232를 이용하여 홈 네트워크를 구현할 경우 다음과 같은 문제점이 있다. 즉, point-to-point 방식을 사용하여 각각의 기기를 모두 RS232로 연결해야 한다는 것이다. 이를 경우 기기의 숫자만큼 회선이 늘어남으로 인해 시스템 자체가 복잡해지고 비용도 증가한다. 이러한 문제점을 개선하고자 이 논문에서는 RS422 Multi-drop mode 시리얼 통신를 이용하여 흠 네트워크를 설계하였고 임베디드 리눅스 시스템으로 제어하였다. 그리고 홈 네트워크 가상환경을 구현하기 위해서 PIC를 이용하여 모터 및 센서를 RS422와 연결하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 추계종합학술대회
• /
• pp.512-516
• /
• 2005

홈 네트워크란 일반적으로 PC를 비롯한 가정 내의 가전기기들이 하나의 네트워크로 통합되어 통신이 가능하도록 하는 것을 의미한다. 21세기에 들어서 홈 네트워크 환경을 위한 여러 가지 기술들이 제시되었다. 대표적으로 HomePNA, IEEE1394, ethernet lan, 블루투스 등이 있다. 일반적으로 홈 네트워크를 구현하는데 있어 가전기기간 데이터를 전송 할 경우 표준 직렬 인터페이스인 RS232를 이용한다. 그러나 RS232를 이용하여 홈 네트워크를 구현할 경우 다음과 같은 문제점이 있다. 즉, point-to-point 방식을 사용하여 각각의 기기를 모두 RS232로 연결해야 한다는 것이다. 이를 경우 기기의 숫자만큼 회선이 늘어남으로 인해 시스템 자체가 복잡해지고 비용도 증가한다. 이러한 문제점을 개선하고자 이 논문에서는 RS422 Multi-drop mode 시리얼 통신을 이용하여 홈 네트워크를 설계하였고 임베디드 리눅스 시스템으로 제어하였다. 그리고 홈 네트워크 가상환경을 구현하기 위해서 PIC를 이용하여 모터 및 센서를 RS422와 연결하였다.

• 대한의용생체공학회:의공학회지
• /
• 제36권5호
• /
• pp.221-227
• /
• 2015

In this study, Multi-Array Electrodes (MAE) and Programmable Multi-channel Electrical Stimulator (PMES) were implemented for firing Trigger Points (TPs) of the patient with Myofascial Pain Syndrome (MPS). MAE has 25 Ag/AgCl electrodes arranged in the form of array ($5{\times}5$) fabricated with flexible pad, which are applicable to be easy-attached to curved specific region of the human body. PMES consisted of 25 channels. Each channel was to generate various electric stimulus patterns (ESPs) by changing the mono-phasic or bi-phasic of ESP, On/Off duration of ESP, the interval between ESP, and amplitude of ESP. PMES hardware was composed of Host PC, Stimulation Pattern Editing Program (SPEP), and Multi-channel Electrical Stimulator (MES). Experiments were performed using MAE and PMES as the following. First experiment was performed to evaluate the function for each channel of Sub- Micro Controller Unit (SMCU) in MES. Second experiment was conducted on whether ESP applied from each channel of SMCU in PMES was focused to the electrode set to the ground, after applying ESP being output from each channel of SMCU in PMES to MAE.

• 전력전자학회논문지
• /
• 제20권4호
• /
• pp.337-343
• /
• 2015

The multi-level inverters are highly efficient for high-power and medium-voltage AC driving applications, such as high-speed railway systems and renewable energy resources, because such inverters generate lower total harmonic distortion (THD) and electromagnetic interface (EMI). Lower switching stress occurs on switching devices compared with conventional two-level inverters. Depending on the multi-level inverter topology, the required components and number of switching devices are different, influencing the overall efficiency. Comparative studies of multi-level inverters based on loss analysis and output characteristic are necessary to apply multi-level inverters in high-power AC conversion systems. This paper proposes a theoretical loss analysis method based on piecewise linearization of characteristic curves of power semiconductor devices as well as loss analysis and output performance comparison of five-level neutral-point clamped, flying capacitor inverters, and high-level cascaded H-bridge multi-level inverters.

• 한국멀티미디어학회논문지
• /
• 제8권7호
• /
• pp.1012-1021
• /
• 2005

본 논문에서는 공동작업을 지원하는 효율적인 다자간 멀티미디어 회의시스템을 설계하고 구현한다. 기존의 다자간 멀티미디어 회의시스템은 영상, 음성 및 문서회의의 데이터 전송으로 인한 대역폭의 제한으로 인해 다수의 사용자가 원활한 공동작업을 수행하rl 어렵다. 특히, 실시간으로 전송되는 영상, 음성의 데이터는 다수의 사용자가 한정된 대역폭을 사용하는 경우 전송지연으로 인하여 원활한 공동작업을 제공하지 못하는 경우가 많다. 본 논문에서는 원활한 공동작업을 지원하기 위해 분산식과 중앙집중식을 혼합한 하이브리드 전송방식을 사용하고, 영상의 경우 IP 그룹화를 이용한 다자간 회의시스템을 구성함으로써 네트워크 대역폭을 줄인다. 또한, 사용자의 수에 따라 적응적 영상 프레임 변화를 이용하여 네트워크의 병목현상을 해소하고, 음성의 품질을 지원하는 효율적인 다자간 멀티미디어 회의시스템을 설계한다.

• 한국실내디자인학회논문집
• /
• 제13권5호
• /
• pp.56-65
• /
• 2004

This study divides the expression techniques of Zaha Hadid into various types who has manipulated her targeted drawings as her unique design tools in the process of architectural design, analyzes them in terms of the vanishing point, visual point for observation and object of observation and attempts to figure out how the multi-visual expression is applied in the conception of form and space and method of observation. By doing so, this study will suggest the characteristics of the expression techniques using multi-visual. Through the above study, the utilization and characteristics of multi-visual expression of the architecture design process of Zaha Hadid are summarized as follows. Firstly, Zaha Hadid utilizes the strained multi-visual perspective technique which can look out over the interaction between masses simultaneously at multi-angles by changing a perspective drawing of vanishing point 1, 2, and 3. Secondly, it utilizes a landscape perspective technique and embodies an Idea of landscape's spatial arrangement through it as the means to search a dynamic relation of architecture, city, land, and space. Thirdly, there is a projected expression using X-ray perspective technique to make the relations between inside and outside of building to three-dimension volume. Zaha Hadid has used the expression techniques using multi-visual by utilizing various points and has developed and used them as her creative tools for idea. By means of escaping from the expression techniques of simple revival, she has used a new expression technique that can represent recognized space. In the past, the content could change the expression techniques in architecture; however, the liberation of architectural expression techniques can change the content in modern times when require new attempts.

• Journal of Communications and Networks
• /
• 제7권2호
• /
• pp.144-156
• /
• 2005

Video streaming over wireless networks is challenging due to node mobility and high channel error rate. In this paper, we propose a multi-source video streaming (MUVIS) system to support high quality video streaming service over IEEE 802.1l-based wireless networks. We begin by collocating a streaming proxy with the wireless access point to help leverage both the media server and peers in the WLAN. By tracking the peer mobility patterns and performing content discovery among peers, we construct a multi-source sender group and stream video using a rate-distortion optimized scheme. We formulate such a multi-source streaming scenario as a combinatorial packet scheduling problem and introduce the concept of asynchronous clocks to decouple the problem into three steps. First, we decide the membership of the multisource sender group based on the mobility pattern tracking, available video content in each peer and the bandwidth each peer allocates to the multi-source streaming service. Then, we select one sender from the sender group in each optimization instance using asynchronous clocks. Finally, we apply the point-to-point rate-distortion optimization framework between the selected sender-receiver pair. In addition, we implement two different caching strategies, simple caching simple fetching (SCSF) and distortion minimized smart caching (DMSC), in the proxy to investigate the effect of caching on the streaming performance. To design more realistic simulation models, we use the empirical results from corporate wireless networks to generate node mobility. Simulation results show that our proposed multi-source streaming scheme has better performance than the traditional server-only streaming scheme and that proxy-based caching can potentially improve video streaming performance.

• Design & Manufacturing
• /
• 제6권2호
• /
• pp.74-78
• /
• 2012

A multi-cavity injection mold system of protein chip for point-of-care with cavity temperature and pressure sensors was proposed in this work. In advance of manufacturing for the multi-cavity injection mold system, a single cavity injection mold system to mold protein chip was considered. Injection molding analysis for the presented system was performed to optimize the process of the molding and suggest guides to design. On the basis of the results for the single cavity system, a multi-cavity injection mold system for protein chip was analyzed, designed and manufactured with cavity temperature and pressure sensors. Results of balanced filling for protein chip models were obtained from the presented mold system.

• 한국CDE학회논문집
• /
• 제14권2호
• /
• pp.129-136
• /
• 2009

Generally, curved surfaces of ship hull are deformed by flame bending (line heating), multi-press forming, and die-less forming method. The forming methods generate the required in-plane/bending strain or displacement on the flat plate to make the curved surface. Multi-press forming imposes the forced displacements on the flat plate by controlling the position of each pressing points based upon the shape difference between the unfolded flat plate and the curved object shape. The flat plate has been obtained from the unfolding system that is independent of the ship CAD. Apparently, the curved surface and the unfolded-flat surface are expressed by different coordinate systems. Therefore, one of the issues is to find a registration of the unfolded surface and the curved shape for the purpose of minimum amount of forming works by comparing the two surfaces. This paper presents an efficient algorithm to get an optimized registration of two different surfaces in the multi-press forming of ship hull plate forming. The algorithm is based upon the ICP (Iterative Closest Point) algorithm. The algorithm consists of two iterative procedures including a transformation matrix and the closest points to minimize the distance between the unfolded surface and curved surfaces. Thereby the algorithm allows the minimized forming works in ship-hull forming.

• 지구물리와물리탐사
• /
• 제7권1호
• /
• pp.7-13
• /
• 2004

In this paper, we demonstrate that Common Mid-Point (CMP) cross-correlation gathers of multi-channel and multi-shot surface waves give accurate phase-velocity curves, and enable us to reconstruct two-dimensional (2D) velocity structures with high resolution. Data acquisition for CMP cross-correlation analysis is similar to acquisition for a 2D seismic reflection survey. Data processing seems similar to Common Depth-Point (CDP) analysis of 2D seismic reflection survey data, but differs in that the cross-correlation of the original waveform is calculated before making CMP gathers. Data processing in CMP cross-correlation analysis consists of the following four steps: First, cross-correlations are calculated for every pair of traces in each shot gather. Second, correlation traces having a common mid-point are gathered, and those traces that have equal spacing are stacked in the time domain. The resultant cross-correlation gathers resemble shot gathers and are referred to as CMP cross-correlation gathers. Third, a multi-channel analysis is applied to the CMP cross-correlation gathers for calculating phase velocities of surface waves. Finally, a 2D S-wave velocity profile is reconstructed through non-linear least squares inversion. Analyses of waveform data from numerical modelling and field observations indicate that the new method could greatly improve the accuracy and resolution of subsurface S-velocity structure, compared with conventional surface-wave methods.