• 제목/요약/키워드: Multi-Level

검색결과 4,767건 처리시간 0.037초

다수준 모형을 이용한 활동참여와 통행행태 분석 (Multi-Level Models for Activity Participation and Travel Behaviors)

  • 최연숙;정진혁;김성호
    • 대한교통학회지
    • /
    • 제20권7호
    • /
    • pp.79-85
    • /
    • 2002
  • 각 개인이 발생하는 통행 행태와 이들 가구 구성원간의 연관관계 및 영향에 대한 이해는 활동기반모형의 궁극적 목표라 할 수 있는 미래의 활동패턴 예측의 가장 기본이 되는 연구사항이라 할 수 있다. 일반적인 회귀 모형의 경우 개인의 활동/통행 패턴을 알아내기 위하여 모집단으로부터 수집되는 개인자료는 가구라는 부분모집단으로 세분화되어 계층적 구조(Hierarchical structure)의 성향을 고려하지 못하고 있어, 그 결과는 편이된 추정치를 낳는다. 따라서, 본 연구에서는 계층적 구조를 갖고 있는 자료를 이용하여 다수준 모형(Multi-Level Model)을 사용하여 개인의 활동/통행 패턴 영향을 규명해내고 활동/통행 패턴의 변화를 가구수준의 변동과 개인수준의 변동으로 나누어 분석하였다. 사용된 자료는 미국 Puget Sound 지역의 Transportation Panel 자료(PSTP)를 이용하였다. 분석 결과 개인의 통행사슬 발생모형에서 가구수준의 변동이 전체변동의 1/4를 차지하고 생계활동 지속시간 모형에서는 전체 변동의 1/8을 차지하는 등의 매우 큰 값을 나타내어 개인의 활동/통행 패턴 분석시 다수준 모형을 통한 분석의 필요성이 대두되었다.

블록 내의 움직임 정보를 이용한 다단계 움직임 예측 알고리즘 (Multi-Level Motion Estimation Algorithm Using Motion Information in Blocks)

  • Heak Bong Kwon
    • 한국멀티미디어학회논문지
    • /
    • 제6권2호
    • /
    • pp.259-266
    • /
    • 2003
  • 본 논문에서는 블록 내의 움직임 정도에 따라 다단계의 블록 레벨을 설정하고, 각 블록 레벨에 따라 각기 다른 움직임 예측을 수행하는 다단계 움직임 예측 알고리즘을 제안한다. 이는 움직임이 없거나 적은 영역에서의 잉여 탐색 과정을 제거하여 계산적 효율성을 증대하고, 움직임 정도가 큰 영역에 대해서는 움직임 예측 과정을 심화시켜 예측의 정확성을 향상시킨다. 실험결과 프레임 당 적은 수의 블록으로 고정된 크기의 블록을 가진 전역 탐색 블록 정합 알고리즘과 Three-Step 탐색 알고리즘보다 MSE를 20% 정도 감소시켰으며 연산량은 전역 탐색 블록 정합 알고리즘과 비교하여 98%, Three-Step 탐색 알고리즘과 비교하여 56% 정도 절감하는 효과를 얼을 수 있었다.

  • PDF

다중전류레벨 인터리버 컨버터를 이용한 전자부하 시스템 구성 (Construct of Electronics Load System using the Multi-level Interiver Converter)

  • 문현철;송광철;이창호;박성미;박성준
    • 한국산업융합학회 논문집
    • /
    • 제23권6_2호
    • /
    • pp.989-998
    • /
    • 2020
  • Recently, demands for large-capacity electronic loads are increasing in various industries such as a reliability test for the performance of a DC power supply device or a dummy-load for improving the stability of an independent microgrid to be actively built in the future. The electronic load required in these various fields requires an operation such as a continuously variable resistance load while minimizing the switching harmonic component generated in the electric load current in order to reduce the influence of interference from the load peripheral device. Electronic loads require a system that minimizes switching current ripple for load control. Therefore, in this paper, we propose a three-level module converter structure to reduce the current ripple of an electronic load, and a multilevel interleaved power converter topology to reduce the current ripple. The validity of the proposed electronic load, 3-level 6 interleaver converter, was verified by simulation and experiment. In addition, the user's convenience was provided by applying the emotional command curve interface method.

Multi-objective Optimization of Pedestrian Wind Comfort and Natural Ventilation in a Residential Area

  • H.Y. Peng;S.F. Dai;D. Hu;H.J. Liu
    • 국제초고층학회논문집
    • /
    • 제11권4호
    • /
    • pp.315-320
    • /
    • 2022
  • With the rapid development of urbanization the problems of pedestrian-level wind comfort and natural ventilation of tall buildings are becoming increasingly prominent. The velocity at the pedestrian level ($\overline{MVR}$) and variation of wind pressure coefficients $\overline{{\Delta}C_p}$ between windward and leeward surfaces of tall buildings were investigated systematically through numerical simulations. The examined parameters included building density ρ, height ratio of building αH, width ratio of building αB, and wind direction θ. The linear and quadratic regression analyses of $\overline{MVR}$ and $\overline{{\Delta}C_p}$ were conducted. The quadratic regression had better performance in predicting $\overline{MVR}$ and $\overline{{\Delta}C_p}$ than the linear regression. $\overline{MVR}$ and $\overline{{\Delta}C_p}$ were optimized by the NSGA-II algorithm. The LINMAP and TOPSIS decision-making methods demonstrated better capability than the Shannon's entropy approach. The final optimal design parameters of buildings were ρ = 20%, αH = 4.5, and αB = 1, and the wind direction was θ = 10°. The proposed method could be used for the optimization of pedestrian-level wind comfort and natural ventilation in a residential area.

감수제의 감수 효율에 따른 다성분계 결합재를 사용한 콘크리트의 물리적 특성에 관한 기초적 연구 (A Study on the Physical Characteristics of Concrete using Multi-Component Blended Binder According to Warter Reduction Efficiency of Warter Reduction Agent)

  • 김경환;오성록;최병걸;최연왕
    • 콘크리트학회논문집
    • /
    • 제27권5호
    • /
    • pp.559-568
    • /
    • 2015
  • 본 연구에서는 감수제의 감수 효율에 따른 다성분계 결합재를 사용한 콘크리트의 물리적 특성에 대한 영향을 평가하기 위하여 고성능 감수제의 종류 3수준(0%, 8% 및 16%) 및 물-결합재비 3수준(40%, 45% 및 50%)에 따른 플라이애시 및 고로슬래그 미분말을 사용한 다성분계 콘크리트 배합을 제조하였다. 또한, 신뢰성 확보를 위하여 콘크리트 배합은 3회 반복실험을 실시하였다. 실험결과, 감수제 종류에 따른 압축강도는 약 20% 이상의 압축강도 차이가 발생하였으며, 감수제의 감수 효율이 콘크리트의 품질에 크게 영향을 미치는 것으로 나타났다. 따라서 감수제의 감수 효율을 반영한 다성분계 콘크리트의 압축강도 예측 모델식을 도출하였으며, 90% 이상의 높은 상관성이 있는 것으로 나타났다.

10MW급 풍력발전용 원형강관 멀티기둥타워의 부재유용도 개념설계 (Member Utilization Concept Design for Hollow Circular Section Multi-column Tower Subjected to 10MW Level Wind Turbines)

  • 김경식;김미진
    • 한국강구조학회 논문집
    • /
    • 제29권3호
    • /
    • pp.205-215
    • /
    • 2017
  • 본 연구에서는 10MW급 풍력하중을 받는 멀티기둥 타워시스템에 원형강관 부재의 구조안전성 및 경제성을 함께 검토하는 방식으로 부재 유용도에 근거한 개념설계의 예를 보였다. 단일 실린더형 타워를 대체할 수 있는 멀티기둥타워 구조의 구성에 관한 기본적인 가정을 정립하였고, 그에 따라 제안된 구조물을 모델링하고 해석하여 부재력을 확인하였다. 산정된 부재강도와 작용하중을 근간으로 제안된 멀티기둥타워의 각 부재별로 축력, 전단, 휨, 비틂에 대한 유용도가 산정되었고, 풍력타워로서의 적합성이 평가하였다. 멀티기둥 풍력타워의 개념설계에 채택될 수 있는 수준의 유용도 범위에서 강관 치수, 세장비 및 수평재 단수 등의 설계 매개변수를 제안하였다.

다중 클래스 아다부스트를 이용한 엘리베이터 내 군집 밀도 추정 (Crowd Density Estimation with Multi-class Adaboost in elevator)

  • 김대훈;이영현;구본화;고한석
    • 한국컴퓨터정보학회논문지
    • /
    • 제17권7호
    • /
    • pp.45-52
    • /
    • 2012
  • 본 논문에서는 다중 클래스 아다부스트 기반의 분류기를 이용하여 엘리베이터 내 군집 밀도를 추정하는 방법을 제안한다. SOM을 사용하는 기존의 방법은 재현성이 떨어지며 충분한 성능을 내지 못한다. 제안한 방법은 GLDM(Grey-Level Dependency Matrix)과 GGDM(Grey-Gradient Dependency Matrix)의 텍스처 특징과 다중 클래스 아다부스트 기반의 분류기를 통해 실내 군집 밀도를 추정한다. 다중 클래스를 분류하기 위해 기존의 아다부스트 알고리즘에서 웨이트 업데이트 식을 변형하여 더 높은 성능의 약한 분류기를 생성하도록 하였다. 군집 밀도는 인원수에 따라 0명, 1~2명, 3~4명, 5명 이상 등 네 가지 클래스로 구분하였다. 엘리베이터 내 영상을 이용한 모의 실험 결과 제안된 방법은 기존의 방법보다 약 20% 정도의 검출률 향상을 나타내었다.

고속 동기 처리를 위한 Binary CDMA 시스템 코릴레이터 설계에 관한 연구 (A Study on Binary CDMA System Correlator Design for High-Speed Acquisition Processing)

  • 이선근;정우열
    • 한국컴퓨터정보학회논문지
    • /
    • 제12권1호
    • /
    • pp.155-160
    • /
    • 2007
  • 고속 데이터 전송에 적합한 Multi-Code CDMA 시스템은 출력이 Multi-Level이 됨으로써 출력신호의 복잡성과 출력단에 선형적인 증폭기를 사용하므로 고가, 고복잡성 등의 단점을 가진다. 이러한 단점을 보완하고자 기존 CDMA 기술에 기반을 둔 Binary CDMA 기술이 제안되었다. Binary CDMA 시스템에서 고속 데이터 연산 시 병목현상이 발생되는 코릴레이터는 동기획득시 매우 중요한 파라미터이다. 기존의 코릴레이터는 전력소모가 작다는 장점이 있지만 코릴레이션의 값을 얻기 위해 여러단의 가산을 거쳐야 하므로 연산량이 많아 처리 속도가 낮은 단점을 가지고 있다. 그러므로 본 논문은 Binary CDMA 시스템에서 고속의 데이터를 처리할 수 있으며 데이터 량이 증가하더라도 칩 면적이 독립적이며 전력소모가 일정한 구조를 가지는 코릴레이터를 제안하였다.

  • PDF

다중기준국 방식을 이용한 GPS 반송파 상대측위 정확도 향상 (Improvement of Relative Positioning Accuracy with GPS Carrier Phase Using Multi-Base Station)

  • 이재원
    • 한국측량학회지
    • /
    • 제26권6호
    • /
    • pp.617-624
    • /
    • 2008
  • 일반적으로 단일기준국을 이용하는 실시간 동적(Real Time Kinematic) GPS는 무선모뎀을 통해 반송파 오차보정량을 이동국으로 전송하여 현장에서 바로 고정밀의 위치를 결정할 수 있다. 하지만 단일기준국 방식은 각 위성마다의 시간대별 반송파 측정값을 지속적으로 제공해야 하며, 전송장해와 모뎀간의 거리 따른 증가 등으로 위치정확도가 저하되는 단점이 있다. 본 논문은 이러한 단점을 보완하기 위해 3대 이상의 다중기준국을 활용한 네트워크 기반의 GPS 반송파 상대측위기술을 구현하였으며, Visual C++로 제작된 실시간 모니터링 프로그램을 이용하여 RTK 네트워크를 구성하였다. 네트워크 구성에서 얻어지는 다중기준국의 오차보정량 가운데 최적의 값을 자동으로 선택하고, GPS buoy 이동국에 적용하여 해수면 관측을 수행하였으며, 이를 통해 얻어진 해수면 변동량을 단일기준국과 비교, 분석하여 결과를 도출하였다.

Naturally Derived Probiotic Supplementation Effects on Physiological Properties and Manure Gas Emission of Broiler Chickens

  • Hassan, Md R.;Ryu, Kyeong-Sun
    • 농업생명과학연구
    • /
    • 제46권4호
    • /
    • pp.119-127
    • /
    • 2012
  • To investigate the influence of multi-probiotic, fermented ginseng byproduct and fermented sulfone on the performance, intestinal microflora and immunity of broiler, a five weeks trial was conducted with 340, 1-d-old $Ross{\times}Ross$ broiler. All broilers were divided into five different groups having 68 birds in each treatment, and they were assigned as control, antibiotic avilamycin (AB), multi-probiotic (MP), fermented sulfone (FS) and fermented ginseng byproduct (FGB). Each artificial or naturally derived probiotic was inoculated 0.1% level with the basal diet, and all diets were provided to birds for five weeks. Weight gain and feed intake were measured weekly basis, and blood, spleen and feces were collectedand used for the physiological properties of broiler chickens. All performances and cholesterol profiles were not significantly differed but numerically lower level of neutral fat and LDL was found in multi-probiotics and FGB treatments respectively. The salmonella spp and E. coli numbers in the ileum were high in control in relation to those of other treatments and were significantly decreased in antibiotics treatments (p<0.05). In addition, Lactobacillus spp. showed significantly higher proliferation in MP as compared to that of others (p<0.05). Fecal ammonia and $CO_2$ gas emission was significantly decreased in MP, FGB and FS, respectively (p<0.05), but significantly increased proliferation of spleen was determined in MP group in comparison of other treatments (p<0.05). Therefore, the results indicates that multi-probiotics would be valuable feed additives to improve the salmonella, E. coli and Lactobacillus proliferation, and manure gas emission of broiler chickens, but further study related to the production of manure gas emission of MP is necessary.