• Progress in Superconductivity and Cryogenics
• /
• 제24권3호
• /
• pp.52-56
• /
• 2022

Single-grain (c-normal or c-parallel) and multi-grain YBCO superconductors were prepared by a melt growth process with/without seeding. The magnetic levitation force and trapped magnetic field at liquid N₂ temperature (77 K) of the YBCO superconductors were investigated. Samples for the levitation force measurement were zero-field cooled (ZFC) to 77 K, and samples for trapped field measurement were field-cooled (FC) using Nd magnets. As for the magnetic levitation force, the c-normal, single grain sample showed the largest value, whereas the multi-grain sample showed the lowest value. The trapped magnetic field of the c-normal and c-parallel single-grain samples was 4-5 times that of the multi-grain sample. In addition, as the external magnetic field (the number of magnets) increased, the both properties increased proportionally. These results were explained in terms of the orientation dependence of the levitation forces and the magnetic field trapping capability of the YBCO superconductor.

• Journal of the Korean Society for Precision Engineering
• /
• 제25권4호
• /
• pp.127-133
• /
• 2008

As the application of the MEMS parts increases, the structural safety of MEMS appears importantly. A lot of MEMS parts are made by a multi-grain silicon wafer, which is an orthotropic material. Moreover directions of the materials on each grain are distributed randomly. The stress analysis for the multi-grain is important factor in order to apply the MEMS parts to industrial applications. The finite element method (FEM) is commonly used by a stress analysis method but the boundary element method (BEM) is known as the result of the BEM is more accurate than that of the FEM since the fundamental solution are used. In this study, we derived the boundary integration equation for the orthotropic material by applying fundamental solutions with complex variables. The multi-region analysis procedure for the BEM and the multi-grain generation procedure by a random process technique are developed in order to apply the analysis of the multi-grain orthotropic material. The discontinuous element is used in order to remove the comer problem in the BEM. The results of the present method are compared with those of the finite element method in order to verify the present procedure.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.479-483
• /
• 2010

In this paper, a study for hybrid rocket combustion with cylindrical multi-port grain and swirl injector was performed to take advantage of regression rate. Change of the regression rate in the multi-port grain the placement of a swirl Injector experiments were performed. The results of multi-port grain using swirl injector were showed that the regression rate was increased compare with the shower head type injector.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• 제15권4호
• /
• pp.17-23
• /
• 2007

This paper describes the flow and performance characteristics inside the post-chamber of the multi-port hybrid rocket motor. Using the computational fluid dynamics (CFD) technique, the non reactive compressible flow fields in the downstream of the fuel grain was numerically calculated. The motor performance obtained from computational results were in agreement with that conducted by the ground motor firing test. Besides, the flow field characteristics inside the post-chamber were discussed under different port numbers (1 port and 3 ports) of the fuel grain. The flow pattern showed that the performance of multi-port hybrid rocket motor having three grain ports is higher than that of the single-port one due mainly to the difference of incoming mass flow rate irrespective to the pressure field.

• Journal of Welding and Joining
• /
• 제20권3호
• /
• pp.98-104
• /
• 2002

A study on microstructures of welds for Zircaloy-4 sheath end closure by the resistance upset welding methods was carried out. Two upset welding process variations such as magnetic farce and multi-impulse resistance welding were used. Grain size and microhardness across welds were analysed in terms of welding parameters. Magnetic farce resistance weld with one cycle of unbalanced mode has smaller upset length and $\alpha-grain$ size in heat affected zone than those of multi-impulse resistance weld because of lower heat input and shorter welding time. Heat affected zone formed by two upset resistance welding variations revealed fine Widmanstatten structure or martensitic ${\alpha}'$ structure due to the high heating rate and foster cooling rate. Magnetic force resistance welds showed recrystallized grains before grain growth, whereas multi-impulse resistance welds showed full grain growth.

• Journal of the Korean Graphic Arts Communication Society
• /
• 제12권1호
• /
• pp.43-55
• /
• 1994

To investigate relations between Grain-shape of plate and Dot-Gain in the lithography, Printing plates were made by Mechanical Grain, Brush Grain and Electrolytic Grain method.Fine multi-grain by electrolytic method of them resulted in less Dot-grain on the paper, more damping water on the none image part of printing plate.

• Journal of the Korean Society of Propulsion Engineers
• /
• 제16권3호
• /
• pp.69-76
• /
• 2012

An achieving method of highly progressive pressure gradient is presented to enhance the missile ejection system's performance by using a gas generator in the condition of preventing erosive burning. To obtain and confirm a stable burning, a ground burning test was performed to evaluate the new methods of a radial-hole and a multi-row propellant grain. The test results show that a radial-hole grain takes good effect on erosive burning and not on ejection performance. On the other hand, a multi-row grain which reduces the length-to-diameter ratio(L/D) of grain is very effective to prevent the erosive burning and to enhance the ejection performance simultaneously.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.432-439
• /
• 2011

An achieving method of highly progressive pressure gradient is presented to enhance the missile ejection system's performance by using a gas generator in the condition of preventing erosive burning. To obtain and confirm a stable burning, a ground burning test was performed to evaluate the new methods of a radial-hole and a multi-row propellant grain. The test results show that a radial-hole grain takes good effect on erosive burning and not on ejection performance. On the other hand, a multi-row grain which reduces the legnth-to-diameter ratio(L/D) of grain is very effective to prevent the erosive burning and to enhance the ejection performance simultaneously.

• Proceedings of the KSRS Conference
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.225-228
• /
• 2007

This paper presents a geostatistical methodology to model local uncertainty in spatial estimation of sediment grain size with high-resolution remote sensing imagery. Within a multi-Gaussian framework, the IKONOS imagery is used as local means both to estimate the grain size values and to model local uncertainty at unsample locations. A conditional cumulative distribution function (ccdf) at any locations is defined by mean and variance values which can be estimated by multi-Gaussian kriging with local means. Two ccdf statistics including condition variance and interquartile range are used here as measures of local uncertainty and are compared through a cross validation analysis. In addition to local uncertainty measures, the probabilities of not exceeding or exceeding any grain size value at any locations are retrieved and mapped from the local ccdf models. A case study of Baramarae beach, Korea is carried out to illustrate the potential of geostatistical uncertainty modeling.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 한국추진공학회 2008년도 제31회 추계학술대회논문집
• /
• pp.247-250
• /
• 2008

An experimental investigation was conducted to clarify the combustion characteristics and merge characteristics of PMMA-GOX and PE-GOX hybrid motor using multi-port fuel grain configuration. The regression rate of multi-port fuel grain is higher than the regression rate of single-port fuel grain by thermal conduction and chamber pressure. The merge of multi-port has an effect on hybrid rocket performance by change of a combustion area.