• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.126-128
• /
• 2002

A learning system was built into an on-line, multi-institutional radiotherapy database, where the treatment history records and the results in each institution were integrated, each radiotherapy planning was supported, and it led to the improvement in treatment results.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -1
• /
• pp.167-170
• /
• 2000

This paper describes a novel multi-operand radix-2 signed-digit(SD) adder. The novel multi-operand addition algorithm can eliminate carry propagation chain by dividing the input operands into even place part and odd place part, and adding them each. The multi-operand adder with this algorithm can add six operands in parallel, and is faster than the ordinary method of SD adder binary tree. A hardware model for proposed adder is shown which is implemented by the current-mode MOSFET circuit technology. Simulations have been made by SPICE in order to verify the function of the proposed circuit.

• Journal of Power Electronics
• /
• 제15권4호
• /
• pp.1054-1065
• /
• 2015

Multi-functional voltage source inverters (VSIs) have attracted increasing attention in recent years for their advantageous auxiliary services for power quality enhancement in autonomous microgrids. These types of VSIs can not only achieve a proper control scheme in autonomous mode but also cope with the prescribed power quality and stability requirements. These functionalities are integrated within the same device, thereby significantly improving the cost-effectiveness of microgrids while decreasing the investment and bulk compared with those of multiple devices with independent functionalities. Control strategies for power quality enhancement in autonomous microgrids using multi-functional VSIs are comprehensively reviewed in this paper. In addition, such VSIs are discussed in detail, and comparisons of which are also provided. Lastly, a number of future research directions for multi-functional VSIs are recommended.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권6호
• /
• pp.1848-1868
• /
• 2014

Multiple-in multiple-out (MIMO) in long-term evolution (LTE) is an essential factor in achieving high speed data rates and spectral efficiency. The unexpected growth in data rate demand has pushed researchers to extend the benefits of multi-user MIMO. The multi-user MIMO system can take full advantage of channel conditions by employing efficient adjustment techniques for scheduling, and by assigning different modulation and coding rates. However, one of the critical issues affecting this feature is the appropriate estimation of channel quality indicator (CQI) to manage the allocated resources to users. Therefore, an accurate CQI estimation scheme is required for the multi-user MIMO transmission to obtain significant improvements on spectral efficiency. This paper presents overviews of multi-user MIMO in LTE/LTE-advanced systems. The link adaptation, scheduling process, and different factors that affect the reliability of CQI measurements are discussed. State-of-the-art schemes for the post-processing CQI estimation, and the comparisons of various CQI estimation schemes to support multi-user MIMO are also addressed.

• Nonlinear Functional Analysis and Applications
• /
• 제27권3호
• /
• pp.641-648
• /
• 2022

Fixed point theory has been a flourishing area of mathematical research for decades, because of its many diverse applications. In this paper, we present a fixed point theorem for s - 𝜌-contractive type multi-valued mappings in modular spaces which will generalize some old results.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제5권2호
• /
• pp.390-407
• /
• 2011

Three-dimensional (3D) video technologies are becoming increasingly popular, as it can provide users with high quality and immersive experiences. However, color inconsistency between the camera views is an urgent problem to be solved in multi-view imaging. In this paper, a perception-based color correction method for multi-view images is proposed. In the proposed method, human visual sensitivity (VS) and visual attention (VA) models are incorporated into the correction process. Firstly, the VS property is used to reduce the computational complexity by removing these visual insensitive regions. Secondly, the VA property is used to improve the perceptual quality of local VA regions by performing VA-dependent color correction. Experimental results show that compared with other color correction methods, the proposed method can greatly promote the perceptual quality of local VA regions greatly and reduce the computational complexity, and obtain higher coding performance.

• 동력기계공학회지
• /
• 제19권3호
• /
• pp.11-15
• /
• 2015

In this paper, the multi-point hydrogen detection system based on the combination of the hetero-core optical fiber SPR hydrogen tip sensor and interrogator by pseudorandom noise (PN) code correlation reflectometry has been developed. In a light intensity-based experiment with an LED operating at 850 nm, it has been presented that a transmitted loss change of 0.32dB was induced with a response time of 25 s for 4% $H_2$ in $N_2$ in the case of the 25-nm Au, 60-nm $Ta_2O_5$, and 5-nm Pd multi-layers film. The proposed sensor characteristic shows excellent reproducibility in terms of loss level and time response for the in- and out- $H_2$ action. In addition, in the experiment for multi-point hydrogen detection, all sensors show the real-time response for 4% hydrogen adding with reproducible working. As a result, the real-time multi-point hydrogen detection could be realized by means of the combination of interrogating system and hetero-core optical fiber SPR hydrogen tip sensors.

• 천문학논총
• /
• 제30권2호
• /
• pp.59-60
• /
• 2015

High resolution, multi-wavelength images from the Dutch Open Telescope were used to study the detailed mechanisms that might be involved in the multiple layer solar atmosphere observed in high cadence multi-wavelength observations. With the exceptional data observed for active region NOAA 10789 on 2005 July 13th, we study the changing pattern of the fibril using multi-wavelength tomography of the $H{\alpha}$ line center and blue wing, Ca II H, and the G Band. It is believed that a long fibril that is rooted in the umbra, with longer apparent periodicity, may be due to morphological changes. To determine this, we conduct phase difference and coherency analysis between points along the fibril to understand how the wave propagates.

• Journal of Electrical Engineering and Technology
• /
• 제10권1호
• /
• pp.8-17
• /
• 2015

This paper analyses the power flow of a three-feeder/multi-bus distribution system by a custom Generalized Power Quality Conditioner (GUPQC). The GUPQC has been realized by three voltage source converters (VSCs) coupled back-to-back through a common DC-link capacitor on the DC-side. One feeder was controlled by the shunt compensator, whereas each of the other two feeders was controlled by the proposed novel series compensator. The GUPQC has the capability to simultaneously compensate voltage and current quality problems of a multi-bus/three-feeder distribution system. Besides that, the power can be transferred from one feeder to other feeders to compensate for poor power quality problems. Extensive simulation studies were carried out by using MATLAB/SIMULINK software to establish the ability of the GUPQC to improve power quality of the distribution systems under distorted supply voltage conditions.

• Structural Engineering and Mechanics
• /
• 제83권2호
• /
• pp.135-151
• /
• 2022

The generalized displacement method is a nonlinear solution scheme that follows the equilibrium path of the structure based on the development of the generalized displacement. This method traces the path uniformly with a constant amount of generalized displacement. In this article, we first develop higher-order generalized displacement methods based on multi-point techniques. According to the concept of generalized stiffness, a relation is proposed to adjust the generalized displacement during the path-following. This formulation provides the possibility to change the amount of generalized displacement along the path due to changes in generalized stiffness. We, then, introduce higher-order algorithms of variable generalized displacement method using multi-point methods. Finally, we demonstrate with numerical examples that the presented algorithms, including multi-point generalized displacement methods and multi-point variable generalized displacement methods, are capable of following the equilibrium path. A comparison with the arc length method, generalized displacement method, and multi-point arc-length methods illustrates that the adjustment of generalized displacement significantly reduces the number of steps during the path-following. We also demonstrate that the application of multi-point methods reduces the number of iterations.