• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.2
• /
• pp.86-90
• /
• 2001

This paper presents a multi output converter system that controls, simultaneously, the separate buck converter and boost converter with the different specification by one digital controller using fuzzy algorithm. As two separate converters are regulated by only one DSP, it is possible to achieve the simple digital control circuit for regulating multi output DC-DC converter. Inference procedure of fuzzy controller is included. The control characteristics of each PWM DC-DC converter is validated by experimental results.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.5
• /
• pp.11-18
• /
• 2021

The small radio frequency tracking radar is a tracking system with a radio frequency sensor that identifies a target through all-weather radio frequency signal processing for a target and searches, detects and tracks the target for the major target. In this paper, we describe the development of a board equipped with TMS320C6678 and XILINX FPGA (Field Programmable Gate Array), a high-speed multi-core DSP that acquires target information through all-weather radio frequency and identifies a target through real-time signal processing. We propose DSP-FPGA combination architecture for DSP and FPGA selection and signal processing, and also explain the design of SRIO for high-speed data transmission.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.1165-1168
• /
• 1998

This paper describes a 72-word by 32-bit 2-read/1-write multi-port register file, which is suitable for 32-bit RISC/DSP microprocessors. To minimize area and achieve high speed, advanced single-ended sense amplifiers are used. Each part of circuit is optimized at transistor level. The verification of functionality and timing is performed using HSPICE simulations. After modeling and validating the circuit at transistor level, it was laid out in a 0.6um 1-poly 3-metal layer CMOS technology. The simulation results show maximum operating frequency is 179MHz in worst case conditions. It contains 27,326 transistors and the size is 3.02mm by 2.20mm.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.7
• /
• pp.12-21
• /
• 1998

본 논문은 음성 부호화기인 MPMLQ(Multi Pulse Maximum Likehood Quantization)를 고정 소숫점 범용 DSP에 실시간으로 구현할 때 발생되는 계산량을 줄이기 위한 변형된 형태의 MPMLQdp 관한 것이다. MPMLQ는 음성 신호에서 선형 예측 계수와 피치 정보를 추출하고 남은 잔여 신호와 가장 유사한 여기 신호를 표현할 때 상관법을 이용 한다. 상관법은 DSP상에 구현할 때 계수 승산 오버플로우를 발생시킬 수 있으므로 연산후 항상 점검하여야 한다. 이것은 MPMLQ 구현시 전체 계산량의 많은 부분을 차지한다. 본 논 문은 이러한 문제점에 착안하여 계수 승산 오버플로우가 발생하지 않도록 입력 음성신호의 크기를 2비트 만큼 줄이고, 이로 인하여 같은 크기로 줄어든 잔여 신호를 고려하여 MPMLQ에서 여기신호의 크기를 표현하는 고정 코드북 이득표를 적절히 조절하였다. 실험 결과 변형된 MPMLQ의 SSNR은 0.040325dB(실험data기준) 향상되었으며, 계산량에 있어서 도 17.7%의 처리속도 향상되었다. 따라서 고정 소숫점 범용 DSP에 실시간 구현이 가능하였다.

• MALSORI
• /
• no.65
• /
• pp.143-152
• /
• 2008

This paper focuses on the real time implementation of an adaptive multi-rate (AMR) speech codec, that is a standard speech codec of IMT-2000, using the TMS320VC5510. The series of TMS320VC55x is a 16-bit fixed-point digital signal processor (DSP) having low power consumption for the use of mobile communications by Texas Instruments (TI) corporation. After we analyze the AMR algorithm and source code as well as the structure and I/O of 7MS320VC55x, we carry out optimizing the programs for real time implementation. The implemented AMR speech codec uses 55.2 kbyte for the program memory and 98.3 kbyte for the data memory, and it requires 709,878 clocks, i.e. about 3.5 ms, for processing a frame of 20 ms speech signal.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.515-518
• /
• 2003

The electrical current generated by heart creates not only electric potential but also a magnetic field. In this paper, we have designed the multiplexing data acquisition system for multichannel bio-magnetic signal measurement. The system consists of VXI rack which is organized MUX and AD board, Industrial rack which is mounted single board computer and DSP board. This system enable to realtime monitoring of multichannel data simultaneously. The number of channel could be increased simply added each module and firmware could be upgraded easily using host port interface of DSP.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.12
• /
• pp.1045-1059
• /
• 2011

A 3-D multi-function radar(MFR) is a modern radar to provide various target information, such as range, doppler, and angle by performing surveillance, multiple target tracking, and missile guidance. In this paper, we introduced a real-time radar signal processor(RSP), which is a crucial component of MFR with its design, implementation using high-speed multiple DSP, and performance. Additionally, we verified that several advanced signal processing algorithms were well-performed in our RSP, such as MCA-CFAR algorithm for target detection in clutter environment, range and velocity measurement algorithm using discriminator estimation, and noise jammer detection algorithm using local minimum selection.

• Journal of IKEEE
• /
• v.22 no.3
• /
• pp.619-623
• /
• 2018

Due to the development of society, the demand for electric power has increased and the quality control of electric power has become an important issue. In order to efficiently perform such power management, we propose a DSP based power measurement system for multi-wire power measurement. Since the conventional power measurement system can measure only the power of one line, a power quality measurement device is required for each line in order to measure the power quality of the individual line. Respectively. The system proposed in this paper proposes a system capable of real-time measurement of power quality at up to 12 points using digital signal processing algorithm, and the prototype based on this system was evaluated through the official test report of Korea Electrotechnology Research Institute. As a result of the performance test, it was evaluated that the error range is excellent at ${\pm}0.3%$.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.3
• /
• pp.273-278
• /
• 2004

In this paper, the recurrent neural networks (RNN) is applied to compensate for HMM recognition algorithm, which is commonly used as main recognizer. Among these recurrent neural networks, the multi-layer recurrent neural prediction model (MRNPM), which allows operating in real-time, is used to implement learning and recognition, and HMM and MRNPM are used to design a hybrid-type main recognizer. After testing the designed speech recognition algorithm with Korean number pronunciations (13 words), which are hardly distinct, for its speech-independent recognition ratio, about 5% improvement was obtained comparing with existing HMM recognizers. Based on this result, only optimal (recognition) codes were extracted in the actual DSP (TMS320C6711) environment, and the embedded speech recognition system was implemented. Similarly, the implementation result of the embedded system showed more improved recognition system implementation than existing solid HMM recognition systems.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.6
• /
• pp.885-890
• /
• 2002

Turbo compressor needs high speed rotation of impeller in structure, high rated gearbox and conventional induction motor. This mechanical system increased the moment of inertia and mechanical friction loss. Resently the study of turbo compressor applied super high speed motor and drive, removing gearbox made its size small and mechanical friction loss minimum. In this study we tried to develope variable super high speed motor controller, compressor controller and MMI controller under one DSP based systems for 1500Hp, 70,000rpm direct drive Turbo compressor. It have to do unitification of each controller"s hardware and software. The result of study is applied to a 150Hp direct turbo compressor and makes it goods.oods.