• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.509-511
• /
• 2005

KOMPSAT -2 equipped with an optical telescope(MSC) will be launched in this year. It can take images of the earth with push-broom scanning at altitude 685Km. Its resolution is 1m in panchromatic channel with a swath width of 15 km After the MSC is tested and the performance is measured at instrument level, it is installed on satellite. The image passes through the electro-optical system, compression and storage unit and fmally downlink sub-systems. This integration procedure necessitates the functional test of all subsystems participating in the image chain. The objective of functional test at satellite level(Quick Look test) is to check the functionality of image chain by real target image. Collimated moving image is input to the EOS in order to simulate the operational environments as if KOMPSAT -2 is being operated in orbit. The image chain from EOS to data downlink subsystem will be verified through Quick Look test. This paper explains the Quick Look test of KOMPSAT -2 and compares the taken images with collimated input ones.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.5
• /
• pp.2054-2060
• /
• 2011

The purpose of this paper is to investigate spray characteristics of GDI injector that is economic and environment-friendly. Injector characteristics such as penetration length, spray angle and mixture formation were measured using experimental visualization technique. Especially, it has been analyzed that the influences of ambient pressure and injection pressure on penetration length and spray angle. To visualize the spray, a constant volume combustion chamber and fuel supply system have been manufactured. A high-speed camera and LED light source have been applied to obtain spray images. The experimental and visualization result shows that the penetration length is increased as decreasing ambient pressure and/or increasing injection pressure. Also, ambient pressure and injection pressure have minor effect on the spray angle variation.

• Journal of Astronomy and Space Sciences
• /
• v.20 no.4
• /
• pp.393-402
• /
• 2003

The Multi-Spectral Camera (MSC) is the payload of KOMPSAT-2 which is designed for earth imaging in optical and near-infrared region on a sun-synchronous orbit. The telescope in the MSC is a Ritchey-Chretien type with large aperture. The telescope structure should be well stabilized and the optical alignment should be kept steady so that best images can be achieved. However, the MSC is exposed to adverse thermal environment on the orbit which can give impacts on optical performance. Solar incidence can bring non-uniform temperature rise on the telescope tube which entails unfavorable thermal distortion. Three ways of preventing the solar radiation were proposed, which were installing external mechanical shield, internal shield, and maneuvering the spacecraft. After trade-off study, internal sun shield was selected as a practical and optimal solution to minimize the effect of the solar radiation. In addition, detailed designs of the structure and sunshield were produced and analyses have been performed. The results were assessed to verify their impacts to the image quality. It was confirmed that the internal sunshield complies with the requirements and would improve image quality.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.9
• /
• pp.2037-2042
• /
• 2012

Synthetic aperture integral imaging is one of promising 3D imaging techniques to capture the high-resolution elemental images using multiple cameras. In this paper, we propose a method of displaying 3D images in space using the synthetic aperture integral imaging technique. Since the elemental images captured from SAII cannot be directly used to display 3D images in an integral imaging display system, we first extract the depth map from elemental images and then transform them to novel elemental images for 3D image display. The newly generated elemental images are displayed on a display panel to generate 3D images in space. To show the usefulness of the proposed method, we carry out the preliminary experiments using a 3D toy object and present the experimental results.

• Journal of Korea Multimedia Society
• /
• v.20 no.2
• /
• pp.196-204
• /
• 2017

Behavior of intelligent video surveillance system is recognized by analyzing the pattern of the object of interest by using the frame information of video inputted from the camera and analyzes the behavior. Detection of object's certain behaviors in the crowd has become a critical problem because in the event of terror strikes. Recognition of object's certain behaviors is an important but difficult problem in the area of computer vision. As the realization of big data utilizing machine learning, data mining techniques, the amount of video through the CCTV, Smart-phone and Drone's video has increased dramatically. In this paper, we propose a multiple-sliding window method to recognize the cumulative change as one piece in order to improve the accuracy of the recognition. The experimental results demonstrated the method was robust and efficient learning units in the classification of certain behaviors.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10b
• /
• pp.44-48
• /
• 2006

디지털 카메라 기술의 발전과 보급으로 공공건물의 보안 카메라부터 개인 휴대 단말기의 카메라까지 동영상 데이터를 수집할 수 있는 수단이 크게 늘었으며, 그 활용 또한 매우 일반화되었다. 동영상 데이터는 문서나 음성 등의 다른 데이터보다 훨씬 구체적이고 사실적인 정보를 포함하므로 과거의 기억을 정리하고 복원하기 위한 유용한 방법이 될 수 있다. 동영상 데이터의 증가와 함께 동영상 요약에 대한 연구가 최근에 활발히 진행되고 있는데, 이들 연구의 대부분은 하나의 동영상을 요약하고 분석하기 위한 것이다. 본 논문에서는 사무실에 여러 대의 카메라를 설치하여 데이터를 저장하며, 이렇게 수집된 동영상 데이터를 효과적으로 요약하고 검색하는 시스템을 구축한다. 동일한 이벤트를 여러 방향에서 바라보고, 그 상황을 가장 잘 설명한 카메라를 선택 할 수 있다는 점에서 멀티 카메라의 사용은 장점을 갖는다. 사전에 정의된 이벤트에 따라 전문가가 어노테이션을 부여하도록 하였으며, 전문가가 설정한 유틸리티에 따라 카메라 선택 및 요약이 이루어진다. 다양한 옵션에 따라 요약된 결과로 사용자 평가를 수행하였다.

• Journal of Institute of Convergence Technology
• /
• v.8 no.1
• /
• pp.9-13
• /
• 2018

The purpose of this study is to investigate the liquid- and vapor-phase spray characteristics, such as spray tip penetration and spray angle using gasoline direct injection (GDI) injector with multi-hole. The vapor-phase spray was captured by the Schlieren visualization system, which consists of high-speed camera, LED lamp, concave mirrors, and knife-edge. The liquid-phase spray was visualized by Mie-scattering techniques. Both spray images of vapor- and liquid-phase were visualized under 373 K of ambient temperature, 1 bar of ambient pressure, and 100/200 bar of injection pressure. The energizing duration was fixed at 1.5 ms. From the analysis of experimental results, it revealed that the increased injection pressure induced an early vaporization due to the improvement of droplet atomization. The spray tip penetration and spray angle in vapor-phase were higher than those in liquid-phase. The difference in the spray tip penetration between vapor- and liquid-spray gradually increased with the time elapsed after the injection. Even with the spray angle characteristics, it was found that the difference between the spray angle of liquid and vapor spray gradually grew after they entered steady-state conditions.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.47 no.1
• /
• pp.137-151
• /
• 2023

Stationary 3D whole-body scanners generally require 5 to 20 seconds of scanning time and cannot effectively detect armpit and crotch areas. Therefore, this study aimed to analyze the accuracy of a photogrammetric technique using a multi-camera system. First, dimensional accuracy was analyzed using a mannequin scan, comparing the differences between the scan-derived measurements and the direct measurements, with an allowable tolerance of ISO 20685-1:2018. Only 2 of 59 measurement items (ankle height and upper arm circumference, specifically) exceeded the ISO 20685-1:2018 criteria. When compared with the results of the eight stationary whole-body scanners assessed by the literature, the photogrammetric technique was found to have the advantage of scanning the top of the head, armpit, and crotch areas clearly. Second, this study found the photogrammetric technique is suitable for obtaining the body scans because it can minimize the perform scanning, resulting in a reduction of measurement errors due to breathing and uncontrolled movements. The error rate of the photogrammetry method was much lower than that of stationary 3D whole-body scanners.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2023.07a
• /
• pp.481-483
• /
• 2023

본 논문에서는 다중 카메라환경에서의 안면인식 기반 영유아 활동 사진 자동 생성 시스템을 개발했다. 개발한 시스템은 어린이집에서 알림장 작성을 위한 촬영하는 동안 보육에 부주의하여 안전사고가 발생하는 것을 방지 할 수 있다. 시스템은 이동식 수집기와 분류 서버로 나뉘어 작동하게 된다. 이동식 수집기는 Raspberry Pi를 이용하였고 초당 1장 내외의 사진을 촬영하여 SAMBA를 사용 공유폴더에 저장한다. 분류 서버에서는 YOLOv5를 사용해 안면을 인식해 분류한다. OpenCV와 TensorFlow-Keras를 통해 분류된 사진에서의 표정을 파악하여 부모에게 전송할 웃는사진만을 분류하여 남겨둔다. 이외의 사진은 /dev/null로 이동하여 삭제된다.

• Tunnel and Underground Space
• /
• v.15 no.1 s.54
• /
• pp.28-38
• /
• 2005

According to the recent development of measurement system utilizing one or a set of boreholes, visualization of the explored underground became to be a major issue. It induced even the introduction of monitoring apparatuses on the borehole wall with multi-function tool, but the usage of these was often limited by where is unfavorable rock condition and a few of engineers can approach. And so, a portable type of borehole camera with only the essential function has been investigated and a few of commercial models about this is recently being applied into the field condition. This paper was based on the monitoring results obtained using a commercial model by Dr. Nakagawa. Discontinuities in rock mass were the topic for the visualization, and it was studied how can visualize their three dimensional distribution and what a numerical formulation is needed and how to understand the visualization result. The numerical formulation was based on the geometric correlation between the dip direction / dip of discontinuous plane and the trend / plunge of borehole, a set of the equation of a plane was induced. As field application of this into two places, it is found that the above visualization methodology will be especially an useful geotechlical tool for analyzing the local distribution of discontinuities.