• Journal of Ocean Engineering and Technology
• /
• v.29 no.2
• /
• pp.120-127
• /
• 2015

When a deep-seabed lifting pump is kept this device has bending and deformation in the axis due to its long length(8m). These influences can be caused a breakdown. Therefore, a mounting must be developed to keep the lifting pump safe. This paper discusses the hydraulic cylinder design of the lifting pump and structural safety estimation of the mounting using SBD(simulation-based design). The multi-body dynamic simulation method is used, which has been used in the automotive, structural, ship building, and robotics industries. In this study, the position and diameter of the hydraulic cylinder were determined based on the results of the strokes and buckling loads for the design positions of the hydraulic cylinder. A structural dynamic model of the mounting system was constructed using the determined design values, and the structural safety was evaluated using this dynamic model. According to these results, this system has a sufficient safety factor to manufacture.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.2
• /
• pp.893-899
• /
• 2012

This paper suggests some strategies for the regional regeneration of Baegun Railway station and surrounding area. One is the reduction of the regional unbalance in those divided into two parts, the other is multi-dimentional plan through the efficient land-use on the side area of railway. For these regional regeneration, providing integrated transit system for the passenger's convenience, connecting existing green axis and creating green zone covering the railway, modifying and improvement of residential environment are suggested.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10a
• /
• pp.315-318
• /
• 1996

In this paper a new positioning method for cylindrical work pieces on rotating supports is studied. A work piece on a rotating axis is positioned by an impact drive mechanism (IDM) whose driving parameters are steadily updated by observing the object movement. The application of this actuator and the use of a multi-functional PC board for all necessary input and output operations such as e.g. data acquisition or wave form generation allow an alignment with a precision of less than 1.mu.m in a relatively short time and at low cost compared to conventional methods.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.2
• /
• pp.288-294
• /
• 2009

The purpose of this study is manufacturing of monolithic housing for modularization of steering gear. Monolithic housing is difficult to weld with only rotation and linear motion. It is for this reason that housing of joining parts have a slope of 76.3 degrees. For this reason, welding trajectory was measured by the cooperative controled robot system, and then allowing for measured results, we developed the dedicated system. The developed system can be welded by using only 3 axises in contrast with robot system using 8 axises in housing welding. In addition, we applied CMT and laser welding device to dedicated system and as a result of experiment, sound bead and excellent roundness could be obtained.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.901-904
• /
• 2000

A direct authentication from gray-scale image, instead of the conventional multi-step preprocessing, is proposed using Gabor filter-based features from the gray-scale fingerprint around core point. The core point is located as a reference point for the translation invariant matching. And its principal symmetry axis is detected for the rotation invariant matching from its neighboring region centered at the core point. And then fingerprint is divided into non-overlapping blocks with respect to the core point and features are directly extracted form the blocked gray level fingerprint using Gabor filter. The proposed fingerprint authentication is based on the Euclidean distance between the corresponding Gabor features of the input and the template fingerprints. Experiments are conducted on 300${\times}$300 fingerprints obtained from a CMOS sensor with 500 dpi resolution, and the proposed method could lower the False Reject Rate(FRR) to 18.2% under False Acceptance Rate(FAR) of 0%.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.6
• /
• pp.981-992
• /
• 2004

Freeze drying under vacuum condition is a complex process that involves simultaneous heat and mass transfer, sublimation of ice, and motion of sublimation front. Proper treatment of the motion of sublimation interface is crucial for an accurate prediction of the freeze drying process. Based on the enthalpy formulation that has been successfully used in liquid/solid phase change problems. a fixed grid method. streamlined for the freeze drying analysis. was developed in this study. The accuracy of the fixed grid method was checked by solving a one-dimensional tray freeze drying and a two-dimensional vial freeze drying problem and then comparing the results with those by the moving grid method. Finally. the freeze drying characteristics of two-dimensional slab and axis-symmetric cylinder was investigated using the fixed grid method.

• Tunnel and Underground Space
• /
• v.7 no.4
• /
• pp.299-309
• /
• 1997

Soil and rock improvement and reinforcement techniques are applied to achieve safe tunnel excavation in difficult geological conditions. The Umbrella Arch Method(UAM), one of the auxiliary techniques, is used to reduce ground permeability and improve stabtility of the tunnel by inserting a series of steel pipes into ground around the crown inclined to the longitudinal axis of the tunnel. Additionally, multi-step grouting is added through the steel pipes. UAM combines the advantages of a modern forepoling system with the grouting injection method. This technique has been applied in subway, road and utility tunneling sites for the last few years in Korea. This paper presents the results of analysis of the case studies on ground movements associated with UAM used in the Seoul Subway line 5 constructon site. Improvement of tunnel stability and decrease of ground settlement expected with pipe insertion are also discussed. Finally, the method to minimize ground settlements caused by NATM tunnelling are suggested.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.2
• /
• pp.126-132
• /
• 2002

Robot manipulator has highly nonlinear dynamics. Therefore the control of multi-link robot arms is a challenging and difficult problem. In this paper an independent joint adaptive fuzzy sliding mode scheme is developed leer control of robot manipulators. The proposed scheme does not require an accurate manipulator dynamic model, yet it guarantees asymptotic trajectory tracking despite gross robot parameter variations. Numerical simulation for independent joint control of a 3-axis PUMA arm will also be included.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.501-504
• /
• 2004

This paper describes the fabrication method for atomic force microscopy(AFM) tip with multi-walled carbon nanotube(MWNT). For making a carbon nanotube (CNT) modified tips, AC electric field which cause the dielectrophoresis was used for alignment and deposition of CNTs in this research. By dropping the MWNT solution and applying an electric field between an AFM tip and an electrode, MWNTs which were dispersed into a diluted solution were directly assembled onto the apex of the AFM tips due to the attraction by the dielectrophoretic force. In this case, we investigate the effect of the angle between a tip axis and an electrode. Experimental setup were presented, and then CNT attached AFM tips are successfully shown in this paper.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.3
• /
• pp.498-505
• /
• 2007

This paper proposes the novel flux barrier that built in q-axis in rotor of IPM type BLDC motor. The novel flux barrier aims to reduce the motor vibration with reduced cogging torque and lessened torque ripple by the sinusoidal waveform distribution of the flux generated in the permanent magnet. For optimization of the novel flux barrier, the Taguchi method is effectively employed which considered multiple objective quality characteristics, such as cogging torque, average torque and efficiency. The result of proposed model compare with the initial model and it is verified by 2D finite element method (FEM) results.