• International Journal of Naval Architecture and Ocean Engineering
• /
• 제2권2호
• /
• pp.112-118
• /
• 2010

The numerical study about the vortex-induced vibration and vortex shedding in the wake has been presented. Prior to the numerical simulation of flexible riser systems concerning engineering conditions, efficiency validating of the proposed FSI solution method have been performed. The comparison between numerical simulation and published experimental data shows that the CFD method designed for FSI solution could give acceptable result for the VIV prediction of flexible riser/pipe system. As meaningful study on VIV and vortex shedding mode with the focus on flexible riser model systems, two kinds of typical simulation cases have been carried out. One was related to the simulation of vortex visualization in the wake for a riser model subject to forced oscillation, and another was related to the simulation of fluid-structure interaction between the pipes of coupled multi-assembled riser system. The result from forced oscillation simulation shows that the vortex-induced vibration with high response frequency but small instantaneous vibration amplitude contributes to vortex conformation as much as the forced oscillation with large normalized amplitude does, when the frequency of forced oscillation was relatively high. In the multi-assembled riser systems, it has been found that the external current velocity and the distance between two pipes are the critical factors to determine the vibration state and the steady vibration state emerging in quad-pipe system may be destroyed more easily than dual-pipe system.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.295-304
• /
• 2010

The paper summarizes the VIV-related research with the focus on flexible riser and pipe models subject to various engineering conditions. First of all, a series of numerical simulations for the purpose of validating the efficiency of FSI solution approach (ANSYS MFX) has been performed. The comparison between the simulation and the experimental data shows that the present FSI solution method is capable of giving acceptable estimation to VIV problems. As a meaningful application to engineering problems, some tentative simulation cases which are difficult to carry out in experiment, such as a flexible pipe with internal flow and multi-assembled pipes, have been successfully carried out. The coupling mechanism between vortex shedding and the VIV has been well interpreted.

• 한국지진공학회논문집
• /
• 제17권1호
• /
• pp.21-31
• /
• 2013

In this study, dynamic characteristics and seismic capacity of the nuclear power plant piping system are evaluated by model test results using multi-platform shake table. The model is 21.2 m long and consists of straight pipes, elbows, and reducers. The stainless steel pipe diameters are 60.3 mm (2 in.) and 88.9 mm (3 in.) and the system was assembled in accordance with ASME code criteria. The dynamic characteristics such as natural frequency, damping and acceleration responses of the piping system were estimated using the measured acceleration, displacement and strain data. The natural frequencies of the specimen were not changed significantly before and after the testing and the failure and leakage of the piping system was not observed until the final excitation. The damping ratio was estimated in the range of 3.13 ~ 4.98 % and it is found that the allowable stress(345 MPa) according to ASME criteria is 2.5 times larger than the measured maximum stress (138 MPa) of the piping system even under the maximum excitation level of this test.

• 융합신호처리학회논문지
• /
• 제21권1호
• /
• pp.13-20
• /
• 2020

조선소에서는 선박 건조 시 설계 및 각 선체 블록의 제작 조립 후 선행의장이라는 것을 실시한다. 선행의장은 선체를 제외한 다른 부품, 장비들을 탑재하는 것을 의미하는데, 이 과정에서 블록 내 존재하는 파이프 및 다양한 장비들의 체결이 각 블록 간 조립 시 정확히 이루어지지 않는다면 오작업 및 그에 따른 생산품질 저하와 재작업 등에 따른 막대한 비용이 발생한다. 또한 이미 완료한 의장작업이라도 파이프 및 내부 자재 공간배치 등의 문제 발생 시 재작업에 따른 선박 생산효율이 나빠진다. 따라서 본 연구에서는 이러한 문제점 해결을 위해 3D 설계도면을 이용하여 공존현실 기술을 기반으로 한 선체의장 작업 전후 공간 배치 및 검사 시스템에 대해 소개하고자 한다. 본 연구에서 개발 및 소개한 다양한 공존현실 알고리즘 및 검사 시스템은 국내에는 도입이 전무한 AR 서비스를 기반으로 하고 있으므로 조선 선박제조 공정뿐 아니라 자동차, 건축 등 설계도면을 이용한 다양한 제조 산업 분야에 널리 적용 가능할 것으로 사료된다.