• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.385-386
• /
• 2010

최근 국내 외의 태양광 발전 시스템은 산업화 대용량화 되어가는 추세이다. 태양광 시스템의 인버터에는 태양전지 모듈의 조합에 따라 MIC(Module-Integrated Converter), 스트링, 멀티 스트링, 센트럴, 멀티 센트럴 인버터로 분류된다. 제한하는 멀티 센트럴 방식의 인버터는 상황에 따른 특정 인버터만 구동하거나, 인버터를 개별적으로 운전하여 태양광 발전설비에 대한 시스템의 효율을 높일 수 있다. 또한 인버터의 가동 시간을 동일하게 운전하여 인버터의 사용 수명을 연장하고, 하나의 인버터 고장이나 유지 보수 시 다른 인버터를 높은 에너지로 발전할 수 있어 에너지 손실을 줄일 수 있다는 장점을 갖는다. 본 논문은 PV 어레이와 인버터를 모델링하였고, 제안하는 멀티 센트럴 인버터의 상황별 동작 모드에 따른 시퀀스 제어 기법을 적용하여 시뮬레이션과 실험을 통하여 그 타당성을 검증하였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10b
• /
• pp.62-65
• /
• 2006

센서 네트워크는 라디오 통신으로 인해 생기는 예상치 못한 문제점을 비롯하여 제한적인 리소스 때문에 응용 개발에 어려움이 많다. 센서 네트워크가 구성된 후의 내부적인 데이터 흐름이나 네트워크에 참여하는 각 노드의 상태는 네트워크의 정보 수집을 통해 알 수 있다. 본 논문은 네트워크의 상태를 모니터링하고 실시간으로 네트워크 파라미터들을 효율적으로 설정할 수 있는 센서 네트워크 관리 시스템을 제안한다. Sensor Network Manager는 Multi-thread와 동적으로 할당 가능한 Kernel Module 기법을 지원하는 RETOS 운영체제를 기반으로 개발 되었다. 간단한 플러딩 기법을 적용하여 센서 네트워크의 상태를 모니터링 한 결과 Sensor Network Manager가 개발자에게 전반적인 네트워크에 대한 통제와 모니터링이 가능하다는 것을 검증하였다.

• The Korean Journal of Applied Statistics
• /
• v.21 no.6
• /
• pp.997-1006
• /
• 2008

This paper proposes a new model by combining an infinite-server queueing model for multi-task processing software system with a perfect debugging model based on Markov process with two types of faults suggested by Lee et al. (2001). We apply this model for module and integration testing in the testing process. Also, we compute several measure, such as the expected number of tasks whose processes can be completed and the task completion probability are investigated under the proposed model.

• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.4
• /
• pp.36-43
• /
• 1992

This paper presents a hierarchical real-time operation control and monitoring scheme of the FMS/CIM center which has been implemented at the Automation and Systems Research Institute of Seoul National University. The hierarchical structure of the whole scheme consists of three lavers. The upper layer is in charge of on-line scheduling, computer network control, shop-floor monitoring and command generation for AGV dispatching, machining, assembly, inspection, set-up, etc. The middle layer has six modules, which are installed in the FMS host computer with the upper layer and run on the multi-tasking basis. Each module is connected to one of six cell controllers distributed in the FMS model plant and transfers operation command down to each cell controller through the Ethernet/TCP-IP local area network. The lower layer is comprised of six cell control software modules for machining cell, assembly cell, inspection cell, set-up stations. AS/RS and AGV. Each cell controller reports the status of the manufacturing facilites to the middle layer as well as ecxecuting the appropriate sequence control of the manufacturing processes.

• Proceedings of the KWS Conference
• /
• 2007.11a
• /
• pp.218-221
• /
• 2007

The surface mounting technology of 0402 electric chip part is necessary to fabricate a high density and multi-functional module, but there is a limitation of the technology, like as a bridge and self-alignement. This work estimated SMT processing factors of 0402 chip. To obtain optimum SMT process, we evaluated effects of stencil thickness, shape of hole on printability and mountability. Printability shows best results under the thickness of $80{mu}m$ with circle hole shape and 90% square hole shape. In case of chip mounting process, chip mis-alignment and bridge was occurred rarely in same conditions. In more thin stencil thickness, $50{mu}m$, strength of 1005 chip parts was poor, because of amount of printed solder was insufficient.

• Journal of Sensor Science and Technology
• /
• v.18 no.6
• /
• pp.409-416
• /
• 2009

A lot of valuable-piece of information are acquisited through ubiquitous sensor network(USN) system composed of man-made sensors. The telemetry system used for communicating to access informations between nature and human-beings monitors and estimates the status of infrastructure, utilities and natural environments to prevent hidden disasters, improving quality of life and productivity in multi-directional views. That would be the reason of USN subsistence. This paper will be a review on how to build long-term USN system. Therefore, this paper focuses on reviewing the sensor interface and the sensor network interface and its significance as the foundation stone for varying USN service profiles and showing its development example, and finally proposing a few of things to set up future-oriented USN open system.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2008.04a
• /
• pp.241-244
• /
• 2008

This study focused on the checking of design guideline using concept of reference plane as a promoting tool in order to apply to practical affair in relation to material standardization in housing build. For this purpose, we above all defined the role of reference plane. After establishing structural type can correspond to planning module of building components and coordination condition, we did exemplicated the sub-detail of building components which be to detach according to design method using the concept of reference plane that be complexed with spacial territory and replace cycle of building component or material.

• Proceedings of the Korea Database Society Conference
• /
• 2008.05a
• /
• pp.349-357
• /
• 2008

E-Catalogs are often duplicated in multiple database systems due to various reasons. This causes the problem of assuring ACID properties of global transactions in multi-database management systems. We suggest a log-based synchronization mechanism for a special situation that catalogs can be changed only in one system and the changes spread to other systems. We have defined several conditions that have to be satisfied to assure the synchronization of the information. We show that the information can be kept identical in a delayed manner if synchronization module fulfills the defined conditions. Finally we show that the suggested mechanism is useful by showing a real world application that uses this synchronization mechanism in e-commerce environment.

• Journal of the Korea Furniture Society
• /
• v.14 no.1
• /
• pp.79-89
• /
• 2003

Today's aesthetics and design orientations seem to be: flexibility, mobility, multi-functionality required front user's new needs. Our spaces have changed increasingly contain the needs of constant mobility and ability to adapt to a wide variety of situations. For efficient use, a modular system in furnishing can manage the spaces with components which are easy to assemble and disassemble. The function comes from spacial technological structure that is an 'union' formed by units to joint each other. The repeated module is tailored to unchanging environmental conditions. On the other hand, the structure defined by change reacts flexibility to a dynamic environment. In decision-making, it is flexible and able to adapt. Their ability to be positioned freely anywhere in the room allows individual tasks to be carried out by different people, and their almost endless variety of uses create distinctive spaces for living.

• Journal of the Korean Ceramic Society
• /
• v.43 no.4 s.287
• /
• pp.253-258
• /
• 2006

In the lamination process of multi-layer ceramic modules, the occurrence of delamination comes into repeatedly. To completely improve the lamination process of LTCC sheets, a binder film was introduced between the layers. The binder film did not originate the delamination until the thickness under $40{\mu}m$. After lamination, the thickness of the binder film was determined by the infilteraion of binder by the pressure, and after the bake-out, was dependent on the decomposition of binder resin. Any detectable defect was not observed in the multilayer structure with Ag inner electrodes.