• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.43-45
• /
• 2004

In this paper, new design concept of MEMS gyroscope using multi mass system is proposed. The gyroscope having wide bandwidth was designed utilizing the multi mass system in order to reduce the degradation of the performance by resonance variation. The multi mass system has more than two masses and separates the resonant peak of each mass. Using MATLAB, the variation of bandwidth and driving displacement according to mass ratio of the multi mass system was analyzed. This result was compared with that of current single mass system gyroscope. In the 7 kHz resonant frequency design, the multi mass system has 395.3Hz bandwidth, which is six times larger than single mass system bandwidth, 58.5 Hz.

• 정보보호학회논문지
• /
• 제33권6호
• /
• pp.1099-1110
• /
• 2023

자율주행 및 robot navigation의 인식 시스템은 성능 향상을 위해 다중 센서를 융합(Multi-Sensor Fusion)을 한 후, 객체 인식 및 추적, 차선 감지 등의 비전 작업을 한다. 현재 카메라와 라이다 센서의 융합을 기반으로 한 딥러닝 모델에 대한 연구가 활발히 이루어지고 있다. 그러나 딥러닝 모델은 입력 데이터의 변조를 통한 적대적 공격에 취약하다. 기존의 다중 센서 기반 자율주행 인식 시스템에 대한 공격은 객체 인식 모델의 신뢰 점수를 낮춰 장애물 오검출을 유도하는 데에 초점이 맞춰져 있다. 그러나 타겟 모델에만 공격이 가능하다는 한계가 있다. 센서 융합단계에 대한 공격의 경우 융합 이후의 비전 작업에 대한 오류를 연쇄적으로 유발할 수 있으며, 이러한 위험성에 대한 고려가 필요하다. 또한 시각적으로 판단하기 어려운 라이다의 포인트 클라우드 데이터에 대한 공격을 진행하여 공격 여부를 판단하기 어렵도록 한다. 본 연구에서는 이미지 스케일링 기반 카메라-라이다 융합 모델(camera-LiDAR calibration model)인 LCCNet 의 정확도를 저하시키는 공격 방법을 제안한다. 제안 방법은 입력 라이다의 포인트에 스케일링 공격을 하고자 한다. 스케일링 알고리즘과 크기별 공격 성능 실험을 진행한 결과 평균 77% 이상의 융합 오류를 유발하였다.

• 대한기계학회논문집
• /
• 제18권11호
• /
• pp.2817-2824
• /
• 1994

A torque split type multi-pass CVT(MPC) system consiting of CVT and planetary gear train with 4 clutches was suggested to overcome the inherent inferior acceleration performance of CVT. Also, a shifting algorithm of MPC was suggested for the two driving modes : (1) power mode and (2) economy mode. By using the shifting algorithm and the MPC vehicle dynamic model, numerical simulations were performed to estimate the performance of the MPC vehicle. Simulation results showed that comparing the performance of the conventional 4-speed automatic transmission, an improvement in acceleration can be obtained by MPC for the power mode and 31% improvement in fuel economy for the economy mode.

• 한국정보통신학회논문지
• /
• 제16권2호
• /
• pp.266-272
• /
• 2012

본 논문에서는 차량 정보를 이용한 멀티뷰 주차 보조 시스템을 제안한다. 제안한 시스템은 운전자에게 차량 주변의 세 방향의 영상을 제공한다. 평행주차나 주차장에서 주차를 할 때 사각지역을 줄이고, 편안하고 안전한 주행을 위해 핸들 조정에 따라 와이드 앵글의 CCD 카메라 영상을 출력한다. 핸들 조향각과 기어 위치는 차량의 ABS ECU에서 OBD-II 포트를 통해 획득한다. 제안한 시스템은 차량 실험을 통해 성능을 확인하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.271-274
• /
• 2001

The present paper deals with the development of digital contouring controller for multiaxial servosystem. Instead of coordinating the commands to the individual feed drives and implementing closed position loop control for each axis, this work is achieved by the evaluation of a optimal cross-couple compensator aimed specifically at improving contouring accuracy in multi-axial feed drives. The optimal control formulation explicitly includes the contour error in the performance index to be minimized. The contouring control is simulated for straight line. The results show that the proposed controller reduces contouring errors considerably, as compared to the conventional uncoupled control for biaxial systems.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.715-718
• /
• 2001

Test in the development of vehicle consist of driving test and simulation test. The last one has many advantages. It can reduce time and cost during development, can overcome the spacial and environmental limitation, and can provides repeatabilities of similar experiments and various data. In these reason, the simulation test is used more for analysis and development of new vehicle. In this research the result of kinematic analysis on multi-axis simulator is compared with the simulated result using dynamic analysis program, ADAMS, and the maximum stress and strain are analyzed for the safety of link and specifications of optimal design using finite element method.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.274-279
• /
• 2000

Driving of the engine makes unbalance forces which induces vibration to the engine mount system. Active vibration control must be performed to reduce the vibration and the propagation of structure-born sound. In this study, the engine system is modeled as 3-dim. vibration system including flexible structures and an effective active noise control method is proposed. Also, appropriate actuator and sensor locations and types are selected. The miniature of the engine vibration system with multi-input multi-output is built and an active vibration control with multiple filtered-X LMS algorithm is applied to it. The applied control method was effective to reduce the transmitted vibration power through the rubber mount It showed the feasibility of the control of the engine vibration systems with flexible structures.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(2)
• /
• pp.781-784
• /
• 2003

In this paper, high density on-board dc/dc converter using multi-layer PCB is proposed. Recently, the communication system wants power supply of open-frame, high density and low profile. So experimental converter was consisted of 3.3V/30A Quarter Brick size DC/DC Converter. To power height limit, coil of transformer, choke and circuits were consisted of multi layer PCB. Besides to improve of efficiency, made secondary synchronous rectifier Mosfet driving circuit. So total efficiency could be improved.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.141-141
• /
• 2000

In the recent day, fatigue life prediction techniques play a major role in the design of components in th ground vehicle industry. Full scale durability testing in the laboratory is an essential of any fatigue life evaluation of components or structure of the automotive vehicle. Component testing is particularly important in today's highly competitive industries where the design to reduce weight and production costs must be balanced with the necessity to avoid expensive service failure. Generally, multi-axis durability testing simulator is used to car교 out the fatigue test. In this paper, the operation software for simultaneously driving 3-axis simulator is developed and the real-time signals of input-output data are displayed in window of PC. Moreover, the displacements and the loads of 3-axis actuators are calibrated separately and the operating characteristics of the actuators are evaluated.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2337-2340
• /
• 2002

This paper presents the method of AGV(Automatic guided vehicle)'s moving environment(plane, corner, edge) recognition using SONAR sensor configuration. As for the SONAR sensor, the Crosstalk effect has been generally considered as an inevitable noisy phenomenon in the indoor environment. However, this effect can be used as a clue for classifying and localizing targets in the indoor environment if those can be controlled and used well. EERUF(error eliminate rapid ultrasonic firing) is a method for firing multiple ultrasonic sensors in mobile robot application and multi-echo mode of POLARIOD Device can reduce the Crosstalk effect. Here, Crosstalk effect was reduced using EERUF and applied to the AGV with a simple wall-following algorithm in the indoor environment. This method was tesed by a typical AGV with multi SONAR sensors in the laboratory environment.