• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.9
• /
• pp.817-825
• /
• 2013

The UHDTV system, which provides realistic service with ultra-high definite video and multi-channel audio, has been studied as a next generation broadcasting service. Since the conventional digital terrestrial transmission system is not capable to cover the increased transmission data rate of the UHDTV service, there are great necessity of researches about increase of data rate. Accordingly, the researches has been studied to increase the transmission data rate of the DVB-T2 system using dual-polarized MIMO technique and high order modulation. In order to optimize the MIMO DVB-T2 system where irregular LDPC codes are used, it is necessary to study the design of the bit mapper that matches the LDPC code and QAM symbols in MIMO channel. However, the research related to the design of the bit mapper has been limited to the SISO system. Therefore, this paper defines a new parameter that indicates the VND distribution of MIMO DVB-T2 system and performs the performance analysis according to the parameter which will be helpful for designing a MIMO bit mapper.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.6
• /
• pp.327-340
• /
• 2017

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2016. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of flow, heat and mass transfer, the reduction of pollutant exhaust gas, cooling and heating, the renewable energy system and the flow around buildings. CFD schemes were used more for all research areas. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results of the long-term performance variation of the plate-type enthalpy exchange element made of paper, design optimization of an extruded-type cooling structure for reducing the weight of LED street lights, and hot plate welding of thermoplastic elastomer packing. In the area of pool boiling and condensing, the heat transfer characteristics of a finned-tube heat exchanger in a PCM (phase change material) thermal energy storage system, influence of flow boiling heat transfer on fouling phenomenon in nanofluids, and PCM at the simultaneous charging and discharging condition were studied. In the area of industrial heat exchangers, one-dimensional flow network model and porous-media model, and R245fa in a plate-shell heat exchanger were studied. (3) Various studies were published in the categories of refrigeration cycle, alternative refrigeration/energy system, system control. In the refrigeration cycle category, subjects include mobile cold storage heat exchanger, compressor reliability, indirect refrigeration system with $CO_2$ as secondary fluid, heat pump for fuel-cell vehicle, heat recovery from hybrid drier and heat exchangers with two-port and flat tubes. In the alternative refrigeration/energy system category, subjects include membrane module for dehumidification refrigeration, desiccant-assisted low-temperature drying, regenerative evaporative cooler and ejector-assisted multi-stage evaporation. In the system control category, subjects include multi-refrigeration system control, emergency cooling of data center and variable-speed compressor control. (4) In building mechanical system research fields, fifteenth studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, renewable energies, etc. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which could be help for improving the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the analyses of indoor thermal environments controlled by portable cooler, the effects of outdoor wind pressure in airflow at high-rise buildings, window air tightness related to the filling piece shapes, stack effect in core type's office building and the development of a movable drawer-type light shelf with adjustable depth of the reflector. The subjects of building energy were worked on the energy consumption analysis in office building, the prediction of exit air temperature of horizontal geothermal heat exchanger, LS-SVM based modeling of hot water supply load for district heating system, the energy saving effect of ERV system using night purge control method and the effect of strengthened insulation level to the building heating and cooling load.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.5
• /
• pp.301-308
• /
• 2021

It is important to develop a digital SOC (Social Overhead Capital) maintenance system for preemptive maintenance in response to the rapid aging of social infrastructures. Abnormal signals induced from structures can be detected quickly and optimal decisions can be made promptly using IoT sensors deployed on the structures. In this study, a digital SOC monitoring system incorporating a multimetric IoT sensor was developed for long-term monitoring, for use in cloud-computing server for automated and powerful data analysis, and for establishing databases to perform : (1) multimetric sensing, (2) long-term operation, and (3) LTE-based direct communication. The developed sensor had three axes of acceleration, and five axes of strain sensing channels for multimetric sensing, and had an event-driven power management system that activated the sensors only when vibration exceeded a predetermined limit, or the timer was triggered. The power management system could reduce power consumption, and an additional solar panel charging could enable long-term operation. Data from the sensors were transmitted to the server in real-time via low-power LTE-CAT M1 communication, which does not require an additional gateway device. Furthermore, the cloud server was developed to receive multi-variable data from the sensor, and perform a displacement fusion algorithm to obtain reference-free structural displacement for ambient structural assessment. The proposed digital SOC system was experimentally validated on a steel railroad and concrete girder bridge.

• Journal of Korea Society of Industrial Information Systems
• /
• v.16 no.4
• /
• pp.27-35
• /
• 2011

Multicarrier-Direct Sequence/Code Division Multiple Access(MC-DS/ CDMA) which is a combination of Orthogonal Frequency Division Multiplexing(OFDM) and DS/CDMA has been of significant interest as a means to take such advantages as bandwidth efficiency, high bit rate and robustness against multipath fading. In this paper we study a reduced-complexity multiuser detection aided multirate MC-DS/CDMA with time(T)-domain and frequency(F)-domain spreading. The one- dimensional orthogonal variable spreading factor(1D OVSF) code extracted from 2D OVSF code are used as a spreading code in T/F-domain. The proposed system will use code grouping interference cancellation(CGIC) receiver to reduce Multiuser Interference(MUI). The CGIC receiver uses code grouping by the correlation properties of 1D OVSF code and dose not requires the code information and activity of other user. The multiuser detector with CGIC receiver will be analyzed in Time- and Frequency-domain separately(jointly). The system performance is analytically derived in Additive White Gaussian Noise(AWGN) channel and we also compare the system performance between proposed system and T/F spreaded single(multi) rate multiuser MC-DS/CDMA system. In the computer simulation results, the proposed receiver of demonstrated huge performance improvement over conventional matched filter receiver.

• Quality Improvement in Health Care
• /
• v.9 no.2
• /
• pp.116-133
• /
• 2002

Background : It is very common in Korea to take care of non-acute patients in an acute setting, due to the lack of long-term facilities. Long term hospitalization increase medical expenses and decreases the bed utilization, which can affect the urgent and emergent admissions, and eventually jeopardize the hospital financially. In this study, strategies for effective transfers to the lower levels of care, and to decrease the length of stay were presented by surveying and analyzing the patient's knowledge of the transfer needs, and the willingness to transfer those whose hospital length of stay was more than 30days. Method : The survey is subject to a group of 251 patients who have been hospitalized over 30 days in a general hospital in Seoul. Excluding those that were in the Intensive Care Unit and psychiatric ward, 214 in-patients were used as participants. They were surveyed from April 9, 2002 to April 17, 2002. One hundred and thirty seven out of 214 were responded which made the response rate 64%. Data were analyzed by SAS and SPSS. Result : Multi-variable Logistic Regression Analysis showed a significant effect in medical expenses, knowledge of referral system and the information of the receiving hospital. The financial burden in medical expenses made the patient 10.7 times more willing to be transferred, knowledge of the referral system made them 5 times more willing to be transferred, and the information of receiving hospital makes 6.5 times more willing to be transferred. Reasons for willing to be transferred to a lower level of care were the phase of physical therapy, the distance from home, the attending physician's advice and being unable to be treated as an out patient. Reasons for refusing to be transferred were the following. The attending physician's competency, not being ready to be discharged, not trusting the receiving hospital's competency due to the lack of information, or never hearing about the referring system by the attending physician. Conclusion : Based on this, strategies for the effective transfer to the lower levels of care were suggested. It is desirable for the attending physician to be actively involved by making an effort to explain the transfer need, and referring to the Healthcare Coordinating Center, which can help the patient make the right decision. Nationwide networking for the referral system is the another key factor that may need to be suggested as an alternative to decrease the medical expenses. Collaborating with the Home Health Agency for the early discharge planning and the Social Service Department for financial aid are also needed. It is recommended that the hospital should expedite the transfer process by prioritizing the cost and the information as medical expenses, knowledge of referring system and the information of the receiving hospital, are the most important factors to the willingness to transfer to a lower level of care.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.1
• /
• pp.168-174
• /
• 2022

In a wave power generation system, the overtopping system is known as an overtopping wave energy converter (OWEC). The performance of an OWEC is affected by wave characteristics such as height and period because its power generation system is sensitive to those characteristics; these, as well as wave direction, depend on the sea. As these characteristics vary, it is hard for the OWEC to produce power in a stable manner. Therefore, it is necessary to find an appropriate shape for an OWEC, according to the characteristics of the sea it is in. This research verified the effect of the design of the OWEC ramp on the hydraulic efficiency using the smoothed particle hydrodynamics (SPH) particle method. A total of 10 models were designed and used in simulations performed by selecting the design parameters of the ramp and changing the attack angle based on those parameters. The hydraulic efficiency was calculated based on the rate of discharged water obtained from the analysis result. The effect of each variable on the overtopping performance according to the shape of the ramp was then confirmed. In this study, we present suggestions for determining the direction for an appropriately shaped OWEC ramp, based on a specific sea area.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.5
• /
• pp.21-27
• /
• 1999

In this paper, we propose an improved MLP-based English pronunciation dictionary generator to apply to the variable vocabulary word recognizer. The variable vocabulary word recognizer can process any words specified in Korean word lexicon dynamically determined according to the current recognition task. To extend the ability of the system to task for English words, it is necessary to build a pronunciation dictionary generator to be able to process words not included in a predefined lexicon, such as proper nouns. In order to build the English pronunciation dictionary generator, we use context-dependent grapheme-to-phoneme multi-layer perceptron(MLP) architecture for each grapheme. To train each MLP, it is necessary to obtain grapheme-to-phoneme training data from general pronunciation dictionary. To automate the process, we use dynamic programming(DP) algorithm with some distance metrics. For training and testing the grapheme-to-phoneme MLPs, we use general English pronunciation dictionary with about 110 thousand words. With 26 MLPs each having 30 to 50 hidden nodes and the exception grapheme lexicon, we obtained the word accuracy of 72.8% for the 110 thousand words superior to rule-based method showing the word accuracy of 24.0%.

• Clinical and Experimental Pediatrics
• /
• v.50 no.12
• /
• pp.1180-1187
• /
• 2007

Systemic lupus erythematosus (SLE) is an episodic, multi-system, autoimmune disease characterized by widespread inflammation of blood vessels and connective tissues and by the presence of antinuclear antibodies (ANAs), especially antibodies to native (double-stranded) DNA (dsDNA). Its clinical manifestations are extremely variable, and its natural history is unpredictable. Untreated, SLE is often progressive and has a significant fatality rate. The most widely used criteria for the classification of SLE are those of the American College of Rheumatology (ACR), which were revised in 1982 and modified in 1997. The presence of four criteria have been diagnosed as a SLE. Rashes are common at onset and during active disease. The oral mucosa is the site of ulceration with SLE. Arthralgia and arthritis affect most children and these symptoms are short in duration and can be migratory. Lupus nephritis may be more frequent and of greater severity in children than in adults. The initial manifestation of nephritis is microscopic hematuria, followed by proteinuria. The most common neuropsychiatric symptoms are depression, psychosis(hallucination and paranoia) and headache. CNS disease is a major cause of morbidity and mortality. Pericarditis is the most common cardiac manifestation. Libman-Sacks endocarditis is less common in children. The most frequently described pleuropulmonary manifestations are pleural effusions, pleuritis, pneunonitis and pulmonary hemorrhage. During the active phase ESR, CRP, gamma globulin, ferritin and anti-dsDNA are elevated. Antibodies to dsDNA occur in children with active nephritis. Antibodies to the extractable nuclear antigens (Sm, Ro/SS-A, La/SS-B) are strongly associated with SLE. Specific treatment should be individualized and based on the severity of the disease. Sepsis has replaced renal failure as the most common cause of death.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.19 no.1
• /
• pp.73-83
• /
• 2016

Forest degradation reduces ecosystem services provided by forest and could lead to change in composition of species. In North Korea, there has been significant forest degradation due to conversion of forest into terrace fields for food production and cut-down of forest for fuel woods. This study analyzed the phenological changes in North Korea, in terms of vegetation and moisture in soil and vegetation, from March to Octorber 2013, using MODIS (MODerate resolution Imaging Spectroradiometer) images and indexes including NDVI (Normalized Difference Vegetation Index), NDSI (Normalized Difference Soil Index), and NDWI (Normalized Difference Water Index). In addition, marginal farmland was derived using elevation data. Lastly, degraded terrace fields of 16 degree was analyzed using NDVI, NDSI, and NDWI indexes, and marginal farmland characteristics with slope variable. The accuracy value of land cover classification, which shows the difference between the observation and analyzed value, was 84.9% and Kappa value was 0.82. The highest accuracy value was from agricultural (paddy, field) and forest area. Terrace fields were easily identified using slope data form agricultural field. Use of NDVI, NDSI, and NDWI is more effective in distinguishing deforested terrace field from agricultural area. NDVI only shows vegetation difference whereas NDSI classifies soil moisture values and NDWI classifies abandoned agricultural fields based on moisture values. The method used in this study allowed more effective identification of deforested terrace fields, which visually illustrates forest degradation problem in North Korea.

• Steel and Composite Structures
• /
• v.26 no.4
• /
• pp.473-484
• /
• 2018

Free vibration of cross-ply laminated plates using a higher-order shear deformation theory is studied. The arbitrary number of layers is oriented in symmetric and anti-symmetric manners. The plate kinematics are based on higher-order shear deformation theory (HSDT) and the vibrational behaviour of multi-layered plates are analysed under simply supported boundary conditions. The differential equations are obtained in terms of displacement and rotational functions by substituting the stress-strain relations and strain-displacement relations in the governing equations and separable method is adopted for these functions to get a set of ordinary differential equations in term of single variable, which are coupled. These displacement and rotational functions are approximated using cubic and quantic splines which results in to the system of algebraic equations with unknown spline coefficients. Incurring the boundary conditions with the algebraic equations, a generalized eigen value problem is obtained. This eigen value problem is solved numerically to find the eigen frequency parameter and associated eigenvectors which are the spline coefficients.The material properties of Kevlar-49/epoxy, Graphite/Epoxy and E-glass epoxy are used to show the parametric effects of the plates aspect ratio, side-to-thickness ratio, stacking sequence, number of lamina and ply orientations on the frequency parameter of the plate. The current results are verified with those results obtained in the previous work and the new results are presented in tables and graphs.