• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1112-1113
• /
• 2015

In the end of 2014, Changwon National University and TECHSTEEL Co., Ltd. had initiated a project on the development of a 300 kW-class HTS DC Induction Furnace(HTS DC IF) for preheating non-ferrous metal billets funded by the Korea Institute of Energy Technology Evaluation and Planning for 3 years. This is the one of the most realistic commercial machines applying the coated conductors. In this paper, the development progress of a 300 kW-class HTS DC IF was introduced. The major characteristics of the furnace including its capacity, structure and operation scheme were presented. For ensuring the successful design, a pre-validation study was performed through the electromagnetic, heat transfer and solid mechanical analysis using a multi-physics FEM tool. The aluminum billet was heated up to $540^{\circ}C$ under 1 T of the magnetic flux density at the center of the billet, and the simulation results were described in detail.

• KCID journal
• /
• v.19 no.1
• /
• pp.30-39
• /
• 2012

In recent years, there have been a lot of severe flood and drought disasters and the rural environment have been worsened due to rapid industrialization and urbanization in the river basins of Korea. To prevent such disasters and to improve environment in the era of climate change, Korean Government carried out 110 projects to heighten irrigation dam in the rural area. The study has been carried out to evaluate the heightening work of the irrigation dam for the supply of reserved water and to derive optimal scheme to allocate the water resource for irrigation, domestic demand and environmental conservation as well as to contribute for the rural development in sustainable way. The study is focused on the Seoam Irrigation Dam which has been constructed in 2005 to be connected with the new Gami Reservoir which has been constructed since 2010. In addition, it was studied the contribution effect of the reservoirs for the adjacent comprehensive rural development projects which have been executed by local government. In the study, the principles and visions of sustainable development which have been derived by International Commission on Irrigation and Drainage is applied to estimate the sustainability of the irrigation dams in line with the adjacent comprehensive rural development projects. The project is estimated that the water resource in the reservoirs shall be used integratedly in cooperation with various stakeholders not only to conserve water environment but also to increase productivity of agricultural goods and ecological tour in the rural area.

• Korean Institute of Interior Design Journal
• /
• v.22 no.5
• /
• pp.88-95
• /
• 2013

The purpose of this study is to analyze the phenomenological approaches in Holl's architecture centered on his Nelson-Atkins Art Museum. This study mainly deals with concrete and practical architectural contents based on his recent works rather than existing studies about philosophical point of views to his architecture. Because Holl has had turning point from theoretical research to practical application and development stage. Therefore, this study aims to find out Holl's phenomenological approaches that were different from his early works. Nelson-Atkins art museum shows effect of luminosity as well as inflow of light in the phenomenological experiences of light and space. Holl gave new addition building that he designed contrasts of massing, transparency of material, colors to enhance existence of new building through phenomenological experiences. Narrow and long circulation and various focal points provide multi-view points and overlapped spaces in body experiences As a result, Holl shows shifts from theoretical application to architectural utilization. Nelson-Atkins art museum is important in that this project is one of stating points about this shift.

• Ocean and Polar Research
• /
• v.37 no.4
• /
• pp.265-278
• /
• 2015

We analyzed the North Pacific Intermediate Water (NPIW) that was simulated in 25 coupled general circulation models (CGCMs) using historical and Representative Concentration Pathway 4.5 (RCP4.5) scenario experiments of Coupled Model Intercomparison Project Phase 5 (CMIP5), focusing on the evaluation of the performance of HadGEM2-AO. A large inter-model diversity in salinity, density, and depth of the NPIW exists even though the multi-model ensemble mean (MME) is comparable to observations. It was found that the depth of the NPIW tends to be deeper in the models in which the NPIW is relatively saltier. HadGEM2-AO simulates the lightest NPIW having the lowest salinity at shallower depth, compared with other CGCMs. Future projections of the NPIW show that the temperature of the NPIW increases, but the density decreases in all CMIP5 models. It was shown that the salinity of the NPIW decreases in most models and the decrease tends to be larger in models simulating the lighter NPIW. The HadGEM2-AO projects moderate changes in the temperature and density of the NPIW out of the CMIP5 models.

• International Journal of Fluid Machinery and Systems
• /
• v.10 no.1
• /
• pp.1-8
• /
• 2017

Bifurcation refers to wye division of penstock to divide the flow symmetrically or unsymmetrically into two units of turbine for maintaining economical, technical and geological substrates. Particularly, water shows irrelevant behavior when there is a sudden change in flow direction, which results into the transition of the static and dynamic behavior of the flow. Hence, special care and design considerations are required both hydraulically and structurally. The transition induced losses and extra stresses are major features to be examined. The research on design and analysis of bifurcation is one of the oldest topics related to R&D of hydro-mechanical components for hydropower plants. As far as the earlier approaches are concerned, the hydraulic designs were performed based on graphical data sheet, head loss considerations and the mechanical analysis through simplified beam approach. In this paper, the multi prospect approach for design of Bifurcation, incorporating the modern day's tools and technology is identified. The hydraulic design of bifurcation is a major function of dynamic characteristics of the flow, which is performed with CFD analysis for minimum losses and better hydraulic performances. Additionally, for the mechanical design, a simplified conventional design method as pre-estimation and Finite Element Method for a relevant result projections were used.

• Health Policy and Management
• /
• v.27 no.3
• /
• pp.211-218
• /
• 2017

Background: Korea set up new diagnosis related group (DRG) as demonstration project in 2009. The new DRG was reformed in 2016. The main purpose of study is to identify the effect of reform on accuracy of payment. Methods: This study collected inpatient data from a hospital which contains medical information and cost from 2015 to 2016. The dependent variables were accuracy of total, bundled, unbundled payment, and payment for procedures. To analyze the effect of reform, this study conducted a multi-variate regression analysis adjusting for confounding variables. Results: The accuracy of payment increased after policy reform. The accuracy of total, bundled, unbundled payment, and payment for procedures significantly increased 3.90%, 2.92%, 9.03%, and 14.57% after policy reform, respectively. The accuracy of unbundled payment showed the largest increase among dependent variables. Conclusion: The results of study imply that policy reform enhanced the accuracy of payment. The government needs to monitor side effects such as increase of non-covered services. Also, leads to a considerable improvement in the value of cost unit accounting as a strategic play a role in development of DRG.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.1
• /
• pp.65-71
• /
• 2020

Recently, interest in the DC transmission is rapidly increasing worldwide. In many countries and leading companies are prior to the aggressive development of HVDC technology and application. Especially, VSC-HVDC system has been widely applied to transfer power at long distance between power plant and power consumption area. Therefore in this paper, we analyzed the benefit-cost of VSC-HVDC system which has more advantages than existing transmission system. The proposed system is MMC(Modular Multilevel Converter) VSC-HVDC system that have stability of Power Grid, interconnect Large-scale New Power Generation Plants by prevents Blackout. And MMC VSC-HVDC system Reduced the loss importing foreign systems. And the benefits were calculated in four stages, and the costs were applied to the actual project. By evaluating the various avoidance costs compared to the benefit-cost, it was confirmed that MMC VSC-HVDC system was advantageous in system stability and economic and social benefits.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1997.06a
• /
• pp.95-100
• /
• 1997

In this paper, we report a system specifications of Hi-resolution and four-screen stereo image projection system which was established in VBL(Venture Business Laboratory) at Tokyo Institute of Technology on 3rd July 1996. The system is 3m $\times$ 3m $\times$2.2m rectangular parallelepiped composed of three 150inch side screens and floor. Host computers can generate virtual environment s in real-time and four projecters project these images to the screens. Viewers are, therefore, surrounded by these screens and an illusion of immersion can be created. Because, the views of users are completely covered with the projection images and many kinds of interactive devices can be used in this system. Moreover, many users can have experience the virtual environments at the same time. Usually, this kind of system uses hi-performance graphics workstations for host computers. One is SGI(Silicon Graphics, Inc.) Onyx with 3 Reality Engines. The other system is 4 personal computers. Because hi-performance and low price graphics accelerators for personal computer have been developed in these years, the abilities of VR(Virtual Reality) systems based on personal computers should be investigated.

• Journal of Information Technology Applications and Management
• /
• v.16 no.3
• /
• pp.29-43
• /
• 2009

The advancement of emerging technologies can create more national value, and this motivates many nations to invest their resources in the emerging technologies. However, due to limited financial and human resources, even a wealthy nation cannot afford to randomly invest its resource in all profitable technologies. Therefore, cautious appraisal and prioritization of the competitive technologies should be conducted first, and then concentrated investment should be done for only the selected technologies. In this study, we propose a quantitative criterion for prioritizing the targeted electronic device technologies. The prioritization scheme devised in this study consists of a growth layer, a profitability layer, a vitality layer, and an influence layer. The proposed model forecasts the most promising technologies by applying the revised version of the Analytic Hierarchy Process (AHP). We performed empirical experiments on 12 emerging electronic device technologies to analyze the practical applicability of our study. The experimental data was obtained from 70 experts in high-tech industry as a part of the 2004 Prioritization and Selection project that was carried out in South Korea. As a result, the proposed scheme was able to present the most promising areas for investment in the field of electronic device technology.

• Smart Structures and Systems
• /
• v.6 no.3
• /
• pp.335-347
• /
• 2010

Recent advances in hardware and instrumentation technology have allowed the possibility of deploying very large sensor arrays on structures. Exploiting the huge amount of data that can result in order to perform vibration-based structural health monitoring (SHM) is not a trivial task and requires research into a number of specific problems. In terms of pressing problems of interest, this paper discusses: the design and optimisation of appropriate sensor networks, efficient data reduction techniques, efficient and automated feature extraction methods, reliable methods to deal with environmental and operational variability, efficient training of machine learning techniques and multi-scale approaches for dealing with very local damage. The paper is a result of the ESF-S3T Eurocores project "Smart Sensing For Structural Health Monitoring" (S3HM) in which a consortium of academic partners from across Europe are attempting to address issues in the design of automated vibration-based SHM systems for structures.