• 제목/요약/키워드: Mudstone and shale

검색결과 28건 처리시간 0.021초

Depositional Environment of the Cambrian Machari Formation in the Yeongweol Area, Gangweon Province, Korea

  • Chung, Gong-Soo;Lee, Eun-Kyung
    • 한국지구과학회지
    • /
    • 제23권1호
    • /
    • pp.72-86
    • /
    • 2002
  • The Middle to Late Cambrian Machari Formation in the Machari area, Yeongweol, Korea consists of 7 lithofacies and 3 facies associations, which are thought to be deposits of carbonate ramp (mid to outer ramp) to basin environment. These lithofacies are bedded lime mudstone, laminated lime mudstone, bioclastic/peloidal packstone to grainstone, poloidal/bioclastic wackestone, conglomerate, mottled lime mudstone, and shale. Bedded lime mudstone facies, a few cm thick lime mudstone alternating with shale layer, is believed to have been deposited by intermittent dilute turbidity currents. Laminated lime mudstone facies, alternating lime mudstone with laminated shale, is interpreted to have been formed by fine-grained turbidity currents. Bioclastic/peloidal packstone to grainstone facies was deposited by turbidity current and peloidal/bioclastic wackestone faceis was deposited by debris flow. Conglomerate facies is thought to be deposits of storm activities. Mottled lime mudstone facies is interpreted to have been formed by bioturbation. Shale facies is interpreted to have been formed by suspension settling. Seven lithofacies of the Machari Formation are divided into three facies associations. Facies association I consisted of bedded lime mudstone facies, mottled lime mudstone facies, conglomerate facies, and bioclastic/peloidal packstone to grainstone facies, is interpreted to have been deposited on the mid ramp. Facies assocaition II consisted of bedded lime mudstone facies, laminated lime mudstone facies, bioclastic/peloidal packstone to grainstone facies, and peloidal/bioclastic wackestone facies is thought to be deposits of the outer ramp. Facies association III consisted of laminated lime mudstone facies and shale facies is interpreted to have been formed on the basin environment.

대구경북지역 퇴적암의 포화 및 균열 유발에 따른 강도 특성 (Strength Characteristics of Sedimentary Rock in Daegu-Gyungbuk Area Followed by Saturation and Crack Initiation)

  • 박성식;김성헌;배도한
    • 한국지반공학회논문집
    • /
    • 제34권12호
    • /
    • pp.29-42
    • /
    • 2018
  • 대구경북지역 셰일 및 이암은 다른 암석에 비해 강도가 낮고 풍화에 약하므로 이러한 암석의 포화상태나 균열 발달 정도가 강도에 미치는 영향에 대해 분석할 필요가 있다. 이에 본 연구에서는 대구경북지역 토목공사 현장에서 셰일 및 이암을 채취한 다음 흡수율, SEM, 화학성분, 내구성시험과 같은 기본 물성시험을 실시하였으며, 셰일에 비해 이암의 공극률(흡수율)은 31%(25%) 정도로 6(8)배 정도 높은 값을 보였다. 물에 쉽게 풀리는 이암의 경우 활성도가 높은 스멕타이트 군의 점토광물이 많이 포함되어 있는 것으로 나타났다. 채취한 암석을 소형 정육면체로 가공한 다음 일축압축시험을 실시하여 암석의 건조 및 포화 상태에 따른 일축압축강도를 비교하였다. 또한, 전자레인지를 이용하여 암석 공극 내 물을 가열시켜 내부에서 균열이 발생하도록 유도하였으며, 작동시간을 달리하여 내부 균열의 발생 정도에 따른 강도를 비교하였다. 건조된 셰일과 이암의 일축압축강도는 평균 62MPa, 11MPa이며, 이를 포화시키면 일축압축강도는 셰일은 평균 33MPa, 이암은 4MPa로 47% 및 64% 정도 감소하였다. 전자레인지로 15초 작동시켜 균열을 유발할 경우 포화 상태보다 셰일은 49%, 이암은 52% 정도 강도가 감소하였다. 20초 정도 작동 시 대부분의 암석이 여러 조각으로 파쇄되었으며, 이때 소형 암석 내부의 온도는 200도 정도였다.

지하굴착암 쇄석의 성분 및 역학적 특성 분석( I ) (Analysis on Component and Mechanical Characteristics for Crushed Stone of Excavated Rocks( I ))

  • 이상호;차완용;김영수
    • 한국농공학회지
    • /
    • 제45권1호
    • /
    • pp.74-82
    • /
    • 2003
  • In this paper, an experimental program was undertaken to test the analysis on Component and mechanical characteristics for crushed stone of excavated Rocks from Sandstone, Shale, Mudstone, for use as a new source of aggregate. Physical and mechanical properties, required for aggregate materials, of major constituents of rock wastes including Sandstone, Shale, Mudstone, Felsite, Basalt, Marl were measured in the laboratory Test results showed that the Shale, Felsite, Basalt tested in this study might possibly be used for construction aggregates. In case of Sandstone and Mudstone, some physical properties such as rock strength were generally adoptable but the aggregate characteristics were lower than required.

Thin-bedded, Fine-grained Lacustrine Turbidite Facies on the Northern Coast of Jindo and the Adjacent Area: Density underflow-induced, Ash-rich Turbidity Current Deposits

  • Chang Tae Soo;Chun Seung Soo
    • 한국석유지질학회:학술대회논문집
    • /
    • 한국석유지질학회 1998년도 제5차 학술발표회 발표논문집
    • /
    • pp.29-37
    • /
    • 1998
  • The sedimentary succession on the northern coast of Jindo and the adjacent area comprises the thinly bedded, fine-grained deposits of an epiclastic sandstone, siltstone, black shale/mudstone, and cherty mudstone (ca. 200m in vertical thickness), which are interpreted as the finely stratified turbidites mainly by density underflow-induced currents. Most deposits can be divided into eight facies: thin-bedded, ash-rich massive sandstone layer (mS), graded and laminated mudstone layer (glM), graded mudstone layer with ripple lamination (rM), laminated and graded siltstone layer (lgZ), finely laminated black shale layer (IBS), structureless mudstone layer (mM), thin-bedded cherty mudstone layer (lCM), and contorted and laminated mudstone layer (dlM), The thin-bedded, ash-rich sandstone facies is interpreted to be deposited from high-density turbid underflows during a relatively large flooding. Most thinly bedded mudstone facies would be deposited from low-density turbid underflows (turbidity currents) with some different hydrodynamic condition and sediment concentration during the high discharge of river water. Whereas the structureless mudstone facies may result from raining down of suspended sediment intermittently supplied by overflows and interflows. From the entire succession, graded and laminated mudstone layers interbedded with thin-bedded, ash-rich massive sandstone are dominant in the lower part of the succession, and graded mudstone layers with ripple lamination ripple lamination occur mainly in the middle part of it. On the other hand, iaminated/raded siltstone and contorted/laminated mudstone layers prevail in the upper part. The transition of facies association is suggestive of the continuous change of main depositional setting from basin plain to lower slope, which could be due to the movement of depocenter by the increase of sediment supply (volcanic activity).

  • PDF

퇴적암 풍화토의 공학적 특성 -대구.경북지역을 중심으로 (The Engineering Characteristics of Weathered Sedimentary Rock Soils -ln Taegu and Kyungpook Areas-)

  • 김영수;이상복;정성관
    • 한국지반공학회지:지반
    • /
    • 제11권4호
    • /
    • pp.63-74
    • /
    • 1995
  • 대구.경북지역의 대부분은 퇴적암으로 구성되어 있으며, 퇴적암 풍화토중에서 혈암풍화토와 이함풍화토의 공학적 특성에 대하여 연구하였다. 혈암 및 이암풍화토의 공학적 특성을 파악하기 위하여 다짐시 다짐에너지와 합수비 변화가 입도, 수침 및 비수침CBR, 투수 및 파쇄성에 미치는 영향에 대하여 연구하였고 또한,표면적비(Sw'/Sw)와 파쇄지수(IC)사이의 상관성을 검토하였다. 그 결과는 아래와 같다. (1) 최대 건조단위중량은 혈암풍화토가 이암풍화토보다 큰 값을 갖는 반면, 최적함수비는 혈암풍화토가 이암풍화토보다 작은 값을 갖는다. (2) 최소 투수계수는 최적함수비보다 1~2% 습윤측에 나타났으며, 다짐에너지가 증가할수록 투수계수의 변화폭이 작게 나타났다. (3) 표면적 비와 파쇄지수사이에는 직선적인상관성이 있는 것으로 나타났다. IC = 14.2865w'/Sw -8.429(r=0.9937) (4) 각각의 다짐에너지에서 수침CBR값은 최적함수비의 건조측에서 최대가 되었다가 함수비가 증가할수록 감소하는 경향을 보였다. 또한, 최적함수비를 기준으로 하여 건조측에서는 다짐에너지가 커질수록 비수침 및 수침CBR값이 크게 나타나는 반면, 습윤측에서는 그와 반대의 현상이 나타났다.

  • PDF

경상분지 쇄설성 퇴적암의 대자율 이방성 연구 (A Study on Anisotropy of Magnetic Susceptibility of Clastic Sedimentary Rocks in the Gyeongsang Basin)

  • 최은경;김성욱;황웅기;권현욱;김태형
    • 한국지반공학회논문집
    • /
    • 제34권8호
    • /
    • pp.5-14
    • /
    • 2018
  • 쇄설성 퇴적암의 입자 크기는 암석을 구분하는 기준인 동시에 이방성의 원인이 된다. 이방성은 암석의 강도와 풍화에 영향을 미치는 주 원인 중 하나이다. 경상분지의 영주, 대구, 부산 지역에 분포하는 쇄설성 퇴적암과 화성암을 대상으로 대자율타원체를 결정하고 이방성정도와 모양지수를 통해 이방성을 분석하였다. 외력의 영향이 거의 없는 호성환경에서 퇴적된 사암의 이방성정도는 1.03 이하였다. 단층의 영향을 받은 암석은 1.06, 단층암은 1.14 이상의 이방성 정도를 보였다. 암석의 자기적 이방성은 단층으로부터 거리가 멀어질수록 이방성 정도가 감소하였다. 세립질의 입자로 구성된 이암과 셰일은 일차퇴적구조인 층리가 박층으로 발달하며 이로 인해 단층암과 유사한 크기의 이방성을 보였고 대자율타원체의 모양지수도 편원형을 보였다. 실험 결과로부터 쇄설성퇴적암 중 신선한 이암과 셰일은 단층암과 유사한 이방성을 가지므로 이들 암반과 관련된 구조물의 설계, 시공, 유지관리에서 주의가 필요하다.

퇴적암의 공학적 특성 및 문제점 (Engineering Characteristics and Problems in The Sedimentary rock)

  • 이영휘;김용준;정강복
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2002년도 암반역학위원회 학술세미나 논문집
    • /
    • pp.31-50
    • /
    • 2002
  • The sedimentary rocks deposited in Taegu and Kyongbuk region consist of various rocks such as the shale, mudstone, siltstone and sandstone. The characteristics of the sedimentary rocks are distinguished from those of igneous rocks and metamorphy rocks for the stratum caused by deposit environment. This study investigated engineering characteristics of the anisotropy, weathering rock and filled rock joints in the notable features of sedimentary rocks.

  • PDF