• Journal of Periodontal and Implant Science
• /
• v.31 no.3
• /
• pp.531-542
• /
• 2001

Periodontal debridement is most important procedure in periodontal treatment, because periodontal disease is the biofilm infection. The use of ultrasonic instrument has many clinical advantages compared to classical hand instrument. The introduction of newly developed ultrasonic scaler tips made the use of ultrasonic scaler popular. However the study of tooth substance removal according to the working parameters of ultrasonic scaler with newly developed tips is not sufficient. The purpose of this study is to evaluate the effects of working parameters of piezoelectric ultrasonic scaler with curette tip on casting gold removal. The working parameters was standardized by the sledge device which controls lateral force(0.5 N, 1.0 N, 2.0 N) and power setting was adjusted 2, 4, 8 in P mode and S mode and instrumentation time was 5 seconds. The defect depth and width were measured with profile meter and defect surface was examined by SME. The depth of defect was significantly large in S mode( $39.58{\pm}19.35{\mu}m$) compared to P mode( $8.37{\pm}6.98{\mu}m$). There was significant decrease of depth of defect between 1.0N($32.87{\pm}27.18{\mu}m$) and 2.0N( $14.86{\pm}15.04{\mu}m$). The area of defect was also significantly large in S mode($4482.42{\pm}3551.71{\mu}m^2$) compared to P mode( $922.06{\pm}960.32{\mu}m^2$). There was significant decrease of area of defect between 1.0N($3889.12{\pm}3936.00{\mu}m$) and 2.0N( $974.66{\pm}986.01{\mu}m$). The change of mode did not effect on the width of the defect. The change of power setting did not effect on the depth, width, and area of defect. In spite of limitation of this study it could be concluded that the use of piezoelectric ultrasonic scaler with curette tip on S mode could make significant tooth substance loss.

• Natural Product Sciences
• /
• v.18 no.3
• /
• pp.147-152
• /
• 2012

Ergosta-4,6,8(14),22-tetraen-3-one (1), ergosta-7,24(28)-dien-3-ol (2), and 5,8-epidioxyergosta-6,22-dien-3-ol(3) were isolated from the fruit body of Phellinus pini. Their structures were based on spectroscopic methods including IR, MS, and NMR (1D and 2D). These compounds were screened for their ability to inhibit nitric oxide (NO) production in LPS-activated RAW 264.7 cells. Compounds 1, 2, and 3 reduced NO production in the assay with $IC_50$ values of 29.7 ${\mu}M$ (1), 15.1 ${\mu}M$ (2), and 18.4 ${\mu}M$ (3) respectively. They also suppressed the expression of protein and m-RNA of iNOS and COX-2 in a dose dependent manner by western blot analysis and RT-PCR experiment in LPS-activated microglial cells.

• Korean Journal of Environmental Biology
• /
• v.19 no.2
• /
• pp.129-135
• /
• 2001

The effects of CellCaSi and bioflocculant on the control of algal bloom were investigated in enclosures in a small eutrophic pond. The bioflocculant produced by a bacterial strain S-2 was finally selected to remove Microcystis aeruginosa which was a dominant species of algal bloom in the pond. Enclosure experiment showed that phosphorus concentration decreased dramatically from $131\mu{g}\ell^{-1}$ (Control) to $1-14\mu{g}\ell^{-1}$ in three CellCaSi-enriched enclosures. Chlorophyll $-\alpha$ concentration also decreased from $215\mu{g}\ell^{-1}$ (Control) to $59\mu{g}\ell^{-1}$ by the addition of CellCaSi $(1g\ell^{-1}$, bioflocculant $(2ml\ell^{-1}$, calcium chloride $(1g\ell^{-1}$ and ferric chloride $(2mg\;Fe\ell^{-1})$ in Enclosure 4. From the results of the mouse acute toxicity test of the S-2 bioflocculant and the goldfish survival test in enclosures, it seems that both the S-2 bioflocculant and the CellCaSi do not show any severe toxicity in water system. Consequently, it was concluded that the bioflocculant and the CellCaSi could be used to control algal bloom in eutrophic waters by removing phosphorus and chlorophyll$-\alpha$.

• Korean Journal of Food Science and Technology
• /
• v.36 no.5
• /
• pp.733-739
• /
• 2004

Model for optimally dimensioned PE film bag was developed according to fruit size to maintain best quality of 'Fuyu' persimmon in modified atmosphere packaging (MAP) storage based on relationship between quality and oxygen and carbon dioxide in PE film bag. Harvested persimmons were graded into five sizes, and average weights were LL:261, L:217, M:188, S:168, and SS:154 g. Five fruit units of each grade were optimized in five PE film bag sizes of $150{\times}376,\;140{\times}357,\;130{\times}344,\;130{\times}333,\;and\;120{\times}3l8\;mm$. To minimize quality deterioration such as softening and discoloration, optimal oxygen and carbon dioxide concentrations in PE film bag were 0.5-1.0 and 6.0-8.0%, respectively, and optimal thickness of PE film bag according to fruit size were LL:45, L:50, M:55, S:60, and $SS:65\;{\mu}m$. For all fruit sizes, model for PE film bag area $(mm^2)$ was good quadratic simple equation by fruit weight (g): $Y=-4055.707+627.993X_1-0.701{X_1}^2$. Model far optimal oxygen and carbon dioxide (Y) concentration in PE film bag was suited to linear multiple equation by fruit weight $(X_1,\;g)$ and PE film thickness $(X_2,\;{\mu}m)$. Equations for oxygen and carbon dioxide concentrations (%) were $Y=5.798-0.0109X_l-0.0491X_2\;and\;Y=-2.427+0.01927X_l +0.09646X_2$, respectively.

• Transactions of Materials Processing
• /
• v.27 no.6
• /
• pp.347-355
• /
• 2018

This study investigated the effects of the processing number of multi-axial diagonal forging (MADF) on the microstructural changes of OFC fabricated by MADF processes. The as-extruded OFC was cut to $25mm^3$ cube for the MADF processes. The MADF process consists of plane forging with a thickness reduction of 30% and diagonal forging with a diagonal forging angle of $135^{\circ}$. In order to analyze the microstructural evolutions according to the number of repetitions, 1, 2, 3 and 4 cycles of the MADF process were performed. OFC specimens were successfully deformed without surface cracking for up to 4 cycles of MADF. The grain size, average misorientation and average grain orientation spread (GOS) of MADF processed materials were analyzed using EBSD technique and their Vicker's hardness were also measured. The results showed that MADF process effectively refined the microstructure of OFC with initial average grain size of $84.2{\mu}m$. The average grain sizes of specimens MADF processed for 1, 2, 3, 4 cycles were refined to be $8.5{\mu}m$, $2.2{\mu}m$, $1.5{\mu}m$, $1.1{\mu}m$, respectively. The grain refinement seemed to be saturated when OFC was MADF processed over 2 cycles. In the case of specimens subjected to two or more cycles of MADF, the degree of decrease in average grain size was drastically reduced as the number of cycles increased due to softening phenomena such as dynamic recovery or dynamic recrystallization during processing. The degree of increase in average Vicker's hardness was also dramatically reduced as the number of cycles increased due to the same reason.

• Korean Journal of Optics and Photonics
• /
• v.8 no.2
• /
• pp.111-115
• /
• 1997

Vertical-cavity surface-emitting laser(VCSEL)s operating at 1.3-micron wavelength for optical communication are fabricated by using Si/SiO$_2$dielectric quater-wave pairs on both sides of the InGaAsP(${\lambda}_g$=1.3 ${\mu}{\textrm}{m}$) gain material. VCSELs are optically pumped with a Nd-YAG laser in a pulsed mode and lasing around 1.3 microns is observed. Lasing characteristics such as threshold pump intensity as a function of mirror-reflectivity, polarization, and threshold pump density with pump spot size are investigated.

• Korean Journal of Environmental Biology
• /
• v.19 no.1
• /
• pp.7-17
• /
• 2001

Growth optima and tolerance ranges of marine algae species nay vary greatly during the developmental stage. The establishment stage is clearly of great importance for each generation, affecting the performance of the adult population. The present study was aimed to determine the effect of various concentrations of inorganic nutrients and heavy metals on germination and germlings of Ulva pertusa Kjellman (Chlorophyta). Percent germination increased rapidly as irradiance level increased, reaching the maximum at 100 ${\mu}$mol m$\^$-2/s$\^$-1/ in both east and west seawater. Percent germination in the east seawater was higher than that in the west seawater at irradiances lower than 30 ${\mu}$mol m$\^$-2/s$\^$-1/, and there was no difference in percent germination between the two different seawaters at irradiances higher than 60 ${\mu}$mol m$\^$-2/s$\^$-1/. Germling growth increased in the both cases with increasing irradiances but no growth was found in the dark. Overall germling area was larger in the east seawater than in the west seawater. Number of cell increased with increasing irradiance and became light-saturated at 100 ${\mu}$mol m$\^$-2/s$\^$-1/ in the both cases. Germlings grown in the east seawater had more cells than those cultivated in the west seawater at irradiances lower than 60 ${\mu}$mol m$\^$-2/s$\^$-1/. In various combinations of nitrate and phosphate, percent germination increased with increasing nitrate concentrations irrespective of phosphate concentrations. At 3 days after inoculation, nitrate concentration of 2.5 ppm with all phosphate concentrations promoted germination. Area and number of cell of germlings increased with increasing nitrate concentrations in all phosphate concentrations. In various combinations of copper and lead, germination was delayed as copper concentrations increased in all lead concentrations. Percent germination was severely reduced at 1 ppm Cu$\^$2+/. Area and number of cell of germlings decreased with increasing copper concentrations in all lead concentrations. The highest copper concentration (1 ppm) clearly suppressed the germling growth in U. pertusa.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.15 no.1
• /
• pp.16-24
• /
• 2010

Utilization of dissolved organic phosphorus (DOP) and alkaline phosphatase (APase) activity by Skeletonema costatum, Chaetoceros didymus, Alexandrium tamarense and Heterosigma akashiwo under the phosphorus deficient condition were examined in the laboratory. S. costatum, C. didymus, A. tamarense and H. akashiwo could make use of phosphomonoester and nucleotide compounds for the growth of them as a phosphorus source. APase activity of S. costatum, C. didymus, A. tamarense and H. akashiwo began to be activated at dissolved inorganic phosphorus (DIP) concentrations less than $0.30\;{\mu}M$, $0.33\;{\mu}M$, $2.04\;{\mu}M$ and $0.63\;{\mu}M$ respectively, and their maximum APase activity were $0.01\;pmol\;cell^{-1}\;hr^{-1}$, $0.11\;pmol\;cell^{-1}\;hr^{-1}$, $1.63\;pmol\;cell^{-1}\;hr^{-1}$ and $0.19\;pmol\;cell^{-1}\;hr^{-1}$, respectively. Although each phytoplankton species displayed different APase activity for DOP utilization, their maximum APase activities were higher than maximum phosphorus uptake rates, inferring that these species might be able to keep growing under DIP-limited conditions thought utilizing effectively the hydrolized product of DOP. This result also implies that utilization of DOP might contribute to not only the growth of red tide forming phytoplankton but also the interspecific competition among phytoplankton species in coastal environments.

• Journal of Life Science
• /
• v.22 no.3
• /
• pp.354-359
• /
• 2012

In our study, we investigated the antioxidant effect of methanol extract from the leaves of Picrasma quassioides (PQ) and Chamaecyparis obtuse (S. et Z.) ENDL (CO). Total polyphenol contents of methanol extracts from PQ and CO varied from 138.3 to $367.52{\mu}g/mg$ and total flavonoid contents varied from 8.12 to $46.41{\mu}g/mg$. Contents of polyphenol and flavonoid in PQ were found to be extremely high. In addition, the methanol extract of PQ had a higher antioxidant activity in both DPPH ($4.79{\mu}g/ml$) and ABTS ($7.21{\mu}g/ml$) compared to other plants (CO). Based on the results of the FRAP assay, PQ showed a value of $8.52{\mu}mol/{\mu}g$ and CO exhibited a value of $1.77{\mu}mol/{\mu}g$. The methanol extracts from the leaves of PQ showed the highest radical-scavenging activity in various antioxidant systems.

• Journal of the Korean Society of Radiology
• /
• v.9 no.1
• /
• pp.39-45
• /
• 2015

$La_2W_3O_{12}:Eu^{3+}$ phosphors were prepared by solid state reaction method. The crystal structure was characterized by XRD pattern and ICSD card (78180). Luminescence properties of $La_2W_3O_{12}:Eu^{3+}$ are investigated by optical and laser-excitation spectroscopy in which emission and excitation spectra and time-resolved spectra are measured. The 1 mol % $Eu^{3+}$-doped $La_2W_3O_{12}$ phosphor exhibits broad excitation band peaking at 286 nm due to the ligand-to-metal charge transfer transition. The excitation lines due to the $^7F_0{\rightarrow}{^5D_4},{^5D_4},{^5L_6},{^5G_4},{^5D_3},{^5D_2}$ transitions of $Eu^{3+}$ are observed in the wavelength region 350-500 nm. The strong line emission is observed at 618 nm corresponding to the due to the $^5D_0{\rightarrow}^7F_2$ transition. The lifetime of 618 nm emission decreases with increasing temperature as 7 K ($114{\mu}s$), 100 K ($94{\mu}s$), 200 K ($10{\mu}s$) and 300 K ($0.5{\mu}s$).