• Journal of Powder Materials
• /
• v.24 no.3
• /
• pp.195-201
• /
• 2017

In this study, H13 tool steel sculptures are built by a metal 3D printing process at various laser scan speeds. The properties of commercial H13 tool steel powders are confirmed for the metal 3D printing process used: powder bed fusion (PBF), which is a selective laser melting (SLM) process. Commercial H13 powder has an excellent flowability of 16.68 s/50 g with a Hausner ratio of 1.25 and a density of $7.68g/cm^3$. The sculptures are built with dimensions of $10{\times}10{\times}10mm^3$ in size using commercial H13 tool steel powder. The density measured by the Archimedes method is $7.64g/cm^3$, similar to the powder density of $7.68g/cm^3$. The hardness is measured by Rockwell hardness equipment 5 times to obtain a mean value of 54.28 HRC. The optimum process conditions in order to build the sculptures are a laser power of 90 W, a layer thickness of $25{\mu}m$, an overlap of 30%, and a laser scan speed of 200 mm/s.

• YAKHAK HOEJI
• /
• v.51 no.6
• /
• pp.455-462
• /
• 2007

The participants were recruited 77 healthy adult persons aged between 20 and 50 who have BMI above $25kg/m^2$ in this study. All subjects were randomly assigned to the Gentro $F^{(R)}$ drinking group and non-drinking group. We were investigated about abdomen fat decreasing effect of Gentro $F^{(R)}$, distillate of pepper. Total fat area (TFA), subcutaeneous fat area (SFA) and visceral fat area (VFA) and subcutaneous fat area/visceral fat area ratio (SVR) has been assessed by obesity index (BMI, body fat percent, waist circumference), CT scan taken on the $L4{\sim}5$ position, umbilicus level and blood analysis evaluated during 3 month. The obesity indexes were a little decreased in two groups. However, the waist circumference (WC) was decreased about 5% in drinking group after 3 month and there was significant difference in the change 2 and 3 between two group. TFA and VFA were significantly decreased in the drinking group compare to the non-drinking group (p<0.05) and in umbilicus and $L4{\sim}5$ position, were $370.33{\pm}92.30,\;380.35{\pm}97.64\;and\;114.90{\pm}44.91,\;101.99{\pm}41.24$, respectively. These result means that Gentro $F^{(R)}$ is effective on abdomen fat decreasing. Total cholesterol were decreased without difference in both groups. Lipid factors (TG, HDL- and LDL-cholesterol) were decreased without significance. The mea surement of SVR taken on the $L4{\sim}5$ position were more significantly correlated with obesity index that BMI was 0.787, body fat percentage was 0.754 than on the umbilicus level. The TFA and VSA was correlated with ALP, ASP, Albumin, Insulin and the SVR was correlated with the indexes of liver function and lipid factor found in the blood. Therefore, it is conclude that Gentro $F^{(R)}$ drinking leads to a decrease in abdominal obesity by reducing waist circumference and visceral fat area.

• Analytical Science and Technology
• /
• v.11 no.5
• /
• pp.347-352
• /
• 1998

A study was carried out on the elelctrochemical characteristics of chemically modified electrodes (CMEs) by cyclic voltammetry. Fabrication of CMEs was made by coating with mixed valence (mv) inorganic-metal polymeric films on the glassy carbon electrode surface by potential cycling. Anodic oxidation behavior of methanol and L-ascorbic acid was studied by using CMEs working electrode. Deposition of films such as mv ruthenium oxo/ruthenium cyanide film (mv Ru-O/CN-Ru), mv ruthenium oxo/ferrocyanide film (mv Ru-O/$Fe(CN)_6$), and mv ruthenium oxo/ruthenium cyanide/Rhodium film (mv Ru-O/CN-Ru/Rh) was obtained to coat by scan rate of 50 mV/sec within the specified potential range (-0.5V ~ +1.2V). Film thickness was controlled by the repeat of the potential cycling. Anodic oxidation behavior of methanol was as follow. Calibration graph by using mv Ru-O/CN-Ru film showed linearly from 10 mM to 80 mM MeOH with slope factor of $-7.552{\mu}A/cm^2$. Although slope factor by using mv Ru-O/$Fe(CN)_6$ film was $-5.13{\mu}A/cm^2$, yet linear range of calibration graph could be extended from 10 mM to 100 mM MeOH. Anodic oxidation behavior of L-ascorbic acid was studied by mv Ru-O/CN-Ru film on the glassy carbon electrode and the glassy carbon electrode with Rh film, Glassy carbon electrode modified with Ru polymeric film was showed better sensitivity than the Rh-glassy carbon modified electrode (mv Ru-O/CN-Ru/Rh). Calibration graph was linear from 0.1 mM to 5 mM L-ascorbic acid by using glassy carbon electrode modified with Ru polymeric film. Solpe factor and relative coefficient are $-84.78{\mu}A/mM$ and 0.998, respectively.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.20 no.2
• /
• pp.21-26
• /
• 2016

Purpose Because of many advantages, PET-CT Scanners generally use CT Data for attenuation correction. By using CT based attenuation correction, we can get anatomical information, reduce scan time and make more accurate correction of attenuation. However in case metal artifact occurred during CT scan, CT-based attenuation correction can induce artifacts and quantitative errors that can affect the PET images. Therefore this study infers true SUV of metal artifact region from attenuation corrected image count -to- non attenuation corrected image count ratio. Materials and Methods Micro phantom inserted $^{18}F-FDG$ 4mCi was used for phantom test and Biograph mCT S(40) is used for medical test equipment. We generated metal artifact in micro phantom by using metal. Then we acquired both metal artifact region of correction factor and non metal artifact region of correction factor by using attenuation correction image count -to- non attenuation correction image count ratio. In case of clinical image, we reconstructed both attenuation corrected images and non attenuation corrected images of 10 normal patient($66{\pm}15age$) who examined PET-CT scan in SNUH. After that, we standardize several organs of correction factor by using attenuation corrected image count -to- non attenuation corrected count ratio. Then we figured out metal artifact region of correction factor by using metal artifact region of attenuation corrected image count -to- non attenuation corrected count ratio And we compared standard organs correction factor with metal artifact region correction factor. Results according to phantom test results, metal artifact induce overestimation of correction factor so metal artifact region of correction factors are 12% bigger than the non metal artifact region of correction factors. in case of clinical test, correction factor of organs with high CT number(>1000) is $8{\pm}0.5%$, correction factor of organs with CT number similar to soft tissue is $6{\pm}2%$ and correction factor of organs with low CT number(-100>) is $3{\pm}1%$. Also metal artifact correction factors are 20% bigger than soft tissue correction factors which didn't happened metal artifact. Conclusion metal artifact lead to overestimation of attenuation coefficient. because of that, SUV of metal artifact region is overestimated. Thus for more accurate quantitative evaluation, using attenuation correction image count -to-non attenuation correction image count ratio is one of the methods to reduce metal artifact affect.

• Tuberculosis and Respiratory Diseases
• /
• v.67 no.6
• /
• pp.569-573
• /
• 2009

Idiopathic pulmonary alveolar proteinosis (PAP) is a rare disorder characterized by surfactant component accumulation in the alveolar space. Idiopathic PAP has recently been recognized as a autoimmune disease of impaired alveolar macrophage function caused by autoantibodies against granulocyte-macrophage colony-stimulating factor (GM-CSF). While whole lung lavage has been the standard treatment, not every patient shows a complete response. Subcutaneous injection or inhalation of GM-CSF is another promising treatment option for PAP. A 45-year-old patient visited our hospital for dyspnea, he was diagnosed as PAP and underwent whole lung lavage. Eighteen months later, the patient had not achieved complete remission in despite of initial response. After then he was administered with GM-CSF (5 ${mu}g/kg/day$, subcutaneous injection) for fivetimes a week during 2 months. Nine months later, the abnormal shadows in high-resolution computed tomography (HRCT) decreased and the patient fully recovered in forced vital capacity. After 60 months, the HRCT scan showed complete remission of PAP.

• Tribology and Lubricants
• /
• v.22 no.5
• /
• pp.237-242
• /
• 2006

Surfaces found in nature, including biological surfaces have been providing inspiration to modify/fabricate artificial surfaces as solutions for tribological applications. As an example, the concept of 'lotus-effect' has motivated tribologists world wide to modify/fabricate surfaces for enhanced tribological performance. These was done by creating nano/micro-scale asperities on various surfaces using ion beam milling and ion-beam assisted roughening. In order to understand the attributes of natural surfaces, which are inspirational to tribologists, we characterized the surface of two natural surfaces-Nelumbo nucifera (lotus) and Colocasia esculenta leaves. Further, we evaluated their micro-scale friction property, both in their fresh and dried conditions. The characterization of surfaces was conducted using a confocal microscope and SEM, which involved the evaluation of size and distribution of protuberances. The micro-scale friction property was evaluated using a ball-on-flat type micro-tribo tester, under reciprocating motion. A soda lime glass ball (2 mm diameter) was used in these tests. Tests were conducted at the applied normal load of $3000{\mu}N$, at a sliding speed of 1 mm/sec for a scan length of 3 mm. All experiments were conducted at ambient temperature ($24{\pm}1^{\circ}C}$) and relative humidity ($45{\pm}5%$). It was observed that the friction behaviour of the natural surfaces was influenced by their surface characteristics (morphology and distribution of protuberances) and also by the condition (fresh or dried) in which they were tested.

• Environmental Analysis Health and Toxicology
• /
• v.29
• /
• pp.5.1-5.7
• /
• 2014

Objectives Numerous studies have revealed the adverse health effects of acute and chronic exposure to particulate matter less than $10{\mu}m$ in aerodynamic diameter ($PM_{10}$). The aim of the present study was to examine the spatial distribution of $PM_{10}$ concentrations and cardiovascular mortality and to investigate the spatial correlation between $PM_{10}$ and cardiovascular mortality using spatial scan statistic (SaTScan) and a regression model. Methods From 2008 to 2010, the spatial distribution of $PM_{10}$ in the Seoul metropolitan area was examined via kriging. In addition, a group of cardiovascular mortality cases was analyzed using SaTScan-based cluster exploration. Geographically weighted regression (GWR) was applied to investigate the correlation between $PM_{10}$ concentrations and cardiovascular mortality. Results An examination of the regional distribution of the cardiovascular mortality was higher in provincial districts (gu) belonging to Incheon and the northern part of Gyeonggi-do than in other regions. In a comparison of $PM_{10}$ concentrations and mortality cluster (MC) regions, all those belonging to MC 1 and MC 2 were found to belong to particulate matter (PM) 1 and PM 2 with high concentrations of air pollutants. In addition, the GWR showed that $PM_{10}$ has a statistically significant relation to cardiovascular mortality. Conclusions To investigate the relation between air pollution and health impact, spatial analyses can be utilized based on kriging, cluster exploration, and GWR for a more systematic and quantitative analysis. It has been proven that cardiovascular mortality is spatially related to the concentration of $PM_{10}$.

• Microbiology and Biotechnology Letters
• /
• v.27 no.6
• /
• pp.491-499
• /
• 1999

A great variety of the volatile metabolic by-products was formed in yeast cell during alcohol fermentation. The seibel grape (Vitis labrasca) which was grown in the Southern Korea used for wines. The objective of this research was to identify the volatile flavor compounds during alcohol fermentation and aging at 12$^{\circ}C$. saccharomyces cerevisiae and Schizosaccharomyces pombe were inoculated and fermented in seibel grape must. The volatile flavor compounds of logarithmic, stationary and death phases were extracted, concentrated and identified by gas chromatography/mass spectrometer (GC/MS). The volatile flavor compounds were determined by a Hewlett-Packard 5890 II Plus GC which was equipped with Supelcowax 10 fused silica capillary column (60m$\times$0.32mm$\times$0.25${\mu}{\textrm}{m}$ film thickness) wall coated with polyethyleneglycerol. The scan detection method allowed the comparison of the spectrum from the chromatogram of volatile flavor compounds to those in data Wileynbs base library. Among the volatile compounds collected by ether-hexane extraction method, the evolution of 20 main compounds, such as 9 esters (ethyl butyrate, isoamyl acetate, ethyl caproate, n-hexyl acetate, ethl caprylate, ethyl caprate, diethy succinate, ethyl hexadecanoate, 2-pheneethyl acetate), 4 alcohols (3-methyl-1-butanol, 1-hexanol, 1-heptanol, benzoethanol), 4 ketones and acids (2-octanone, caproic acid, caprylic acid, capric acid), 2 furan and phenol (2,6-bis(1,1-dimethyl ethyl)phenol, 2,3-dihydrobenzofuran) were observed during alcohol fermentation and aging. The production of the esters during alcohol fermentation with S. cerevisiae was higher than those of Sch. pombe. The sensory scores of the aged wine samples in aroma, taste and overall acceptability were not significantly different(p<0.05).

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.7-10
• /
• 2006

Four programs, i.e. TRMM, ADEOS2, ASTER, and ALOS are going on in Japanese Earth Observation programs. TRMM and ASTER are operating well, and TRMM operation will be continued to 2009. ADEOS2 was failed, but AMSR-E on Aqua is operating. ALOS (Advanced Land Observing Satellite) was successfully launched on $24^{th}$ Jan. 2006. ALOS carries three instruments, i.e., PRISM (Panchromatic Remote Sensing Instrument for Stereo Mapping), AVNIR-2 (Advanced Visible and Near Infrared Radiometer), and PALSAR (Phased Array L band Synthetic Aperture Radar). PRISM is a 3 line panchromatic push broom scanner with 2.5m IFOV. AVNIR-2 is a 4 channel multi spectral scanner with 10m IFOV. PALSAR is a full polarimetric active phased array SAR. PALSAR has many observation modes including full polarimetric mode and scan SAR mode. After the unfortunate accident of ADEOS2, JAXA still have plans of Earth observation programs. Next generation satellites will be launched in 2008-2012 timeframe. They are GOSAT (Greenhouse Gas Observation Satellite), GCOM-W and GCOM-C (ADEOS-2 follow on), and GPM (Global Precipitation Mission) core satellite. GOSAT will carry 2 instruments, i.e. a green house gas sensor and a cloud/aerosol imager. The main sensor is a Fourier transform spectrometer (FTS) and covers 0.76 to 15 ${\mu}m$ region with 0.2 to 0.5 $cm^{-1}$ resolution. GPM is a joint project with NASA and will carry two instruments. JAXA will develop DPR (Dual frequency Precipitation Radar) which is a follow on of PR on TRMM. Another project is EarthCare. It is a joint project with ESA and JAXA is going to provide CPR (Cloud Profiling Radar). Discussions on future Earth Observation programs have been started including discussions on ALOS F/O.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.1
• /
• pp.20-25
• /
• 2013

Ultrasonic methods are widely used to degradation assessment. Remaining-life cycle of metal can be estimated by ultrasonic parameters because ultrasonic velocity and attenuation are affected by change of material properties with accumulated fatigue in the metal. Therefore, in this study, we will estimate overall change of material properties by 2D C-scan image. Fatigued aluminum alloy 6061-T6 samples from 0 to 85% were prepared for evaluating fatigue life cycle. Also, degraded image of materials using attenuation is proposed to estimate degree of material degradation for determining degraded area of fatigued samples. Finally, we will predicts process pf degradation with measured attenuation of fatigued aluminum alloy 6061-T6 samples.