• 방송공학회논문지
• /
• 제13권2호
• /
• pp.222-235
• /
• 2008

최근 H.264/AVC 표준을 이용한 HDTV, IPTV와 같은 고화질 디지털 서비스가 증가함에 따라 이를 위한 빠른 동영상 처리 기술들이 요구 되고 있다. 특히, 빠른 축소 영상 추출 방법은 영상의 색인과 동영상 요약 분야에서 요구된다. 하지만 H.264/AVC는 이전의 표준과는 달리 화소 공간에서도 예측방법을 사용하기 때문의 종래의 주파수 공간상의 DC 영상 추출 방법을 적용할 수 없었다. 본 논문에서는 Chen이 제안한 방법에 근간을 두고 H.264/AVC 인트라 프레임으로부터 축소영상을 주파수 영역에서 이론적으로 추출하는 방법을 제안한다. 제안하는 방법은 변환 계수에 직접적으로 적용하기 때문에 고속으로 축소 영상을 추출할 수 있다. 제안하는 방법은 인트라 예측을 화소 공간에서 일반화된 식으로 정리하였고, 주파수 공간에서 LUT(Look Up Table)을 이용하여 고속으로 썸네일을 추출한다. 제안하는 방법을 통해 얻은 썸네일과 참조 복호화기를 통해 얻은 썸네일간의 주관적인 화질은 크게 차이가 나지 않으면서도, HD급 영상에서는 평균 63% 빠르게 썸네일을 추출할 수 있다.

• 유통과학연구
• /
• 제12권2호
• /
• pp.105-112
• /
• 2014

Purpose - This research undertakes to understand the trade structures of both China and Japan to strengthen Sino-Japan economic cooperation and examines impediments to trade between the 2 countries to analyze causes which affect trade and to examine improvements in these areas to find out ways of trade expansion. Through this survey of a defined period of time, we can identify the structural factors of trade dependence in the relationship between China and Japan. Research design, data, methodology - The data were collected from Korea Traders Association, Korea Customs Office and UN Comtrade, from which whole table indexes are calculated by author. This research methodology uses trade related indexes to focus on analyzing comparative advantages based on time-series analysis statistics data (2000~2012), by using the analysis index of Trade Intensity Index (TII), Revealed Comparative Advantage Index (RCA) and Trade Specialization Index (TSI). Results - The export ratio for China against Japan was a little higher in 2000 at 2.867 and the export ratio for China against Japan was sustained in 2005. However, it diminished gradually and reached 1.263 in 2012. During the whole period of 2000~2012, the indexes were maintained without any significant change. However, they are still moving closer to -1. Especially, in 2012 it is the closest it has been to -1. Therefore, Japan has a comparative advantage toward export specialization. On the other hand, China has a comparative advantage toward import specialization. For the whole research period, all indexes were much smaller than 1, which means that China has comprehensively had a comparative disadvantage against Japan for the past 10 years when compared to other industries, even though it had improved in 2000. Conclusions - The summary of conclusions based on empirical analysis research are as follows: First, per the Trade Intensity Index of industries between the 2 countries, we can conclude that export ratio index is 2.867, based on the formula, in 2000, which means the export ratio of China against Japan is a little bit higher. Furthermore, the ratios of 2.259 and 1.263 are indicated in 2005 and 2012 respectively which mean the export ratio of China against Japan was maintained in 2005 but was diminishing gradually as the index is 1.263 in 2012. Second, per the Trade Specialization Index of the shipping industry between China and Japan, -0.379 is indicated in 2000, -0.368 in 2005 and -0.568 in 2012. Looking at the whole period of 2000~2012, the indexes were maintained without any significant change. However, they are still moving closer to -1. Especially, in 2012 it is the closest it has been to -1. Third, per the Revealed Comparative Advantage Index of the automobile industry between China and Japan, the RCA indexes in 2005 and 2012 are 0.246 and 0.306 respectively which are still far from 1 even though the index is improved compared to 2000's value of 0.0001. Therefore, the Chinese automobile industry is very much at a comparative disadvantage to that of the Japanese automobile industry.

• 한국수산과학회지
• /
• 제5권2호
• /
• pp.50-56
• /
• 1972

기포막을 이용한 어구 어법을 고안할 목적으로 각종 기포막으로 해산어의 반응을 관찰한 결과는 다음과 같다. 1. 기포막으로 어군의 진로 차단 및 구집이 가능했다. 2. 송기 압력 $0.160kg/cm^2$일 때, 기포 발생용 파이프 내압이 $0.087kg/cm^2$ 이상일 때는 기포막이 순조롭게 형성되었고, 송기 압력 $0.087kg/cm^2$일 때, 그 내압이 $0.018kg/cm^2$ 이하이면 침수되었다. 3. 효율적인 기포막을 형성하기 위해서는 수심 80cm, 송기 압력 $0.160kg/cm^2$에서는 구멍 크기 $\phi$ 0.3mm 간격 30cm가 가장 효과적이었다(Table 2).

• 한국가정과학회지
• /
• 제7권3호
• /
• pp.15-33
• /
• 2004

A precise understanding of the human form in static pose serves as the basis of designing clothing. When the human body is in motion, however, even an article of clothing designed to fit the human form in static pose can pull and change, thus restricting the body. In order to increase the fit of the clothing, which may be termed the second skin, its form and measurements therefore must be determined in correlation not only with the formal characteristics of the human body, in static pose but also with its functional characteristics in motion, as caused by the movements of the human body. In this study, the motion factor was selected as the primary basis for designing slacks with good fit in both static and moving states. By indentifying the areas in which lower limb movement cause significant changes in body surface lines, we suggest several application methods for designing slacks. Using unmarried female university students aged 18 - 24 as subjects, a total of 32 body surface categories (15 body surface lines and 17 body surface segment lines) were measured in one static and 9 movement poses. In particular, expansion and contraction levels and rates were measured and used in the analysis. The analysis first involved the calculation of the average measurement per body part in body surface line in static pose as well as of the average expansion and contraction levels and rates in 9 lower limb movements. Two-way MANOVA and multiple comparison analysis (Tukey) were conducted on movements and individual somatotypes regarding measurement per body part and expansion and contraction rates. Body parts whose measurements of body surface lines differed significantly in body surface line in static pose versus in movement were then identified. The results of this study are as follows. First, changes in body surface lines caused by lower limb movements were significant in all body surface lines of the lower trunk, both horizontal and vertical, with the exception of abdomen girth, midway thigh girth, ankle girth, hip length, and posterior knee girth. Second, significantly expanded 10 body surface lines in moving pose were detected and illustrated in table 4. These body parts should be studied in designing or pattern designing, especially for close-fitting pants, in using stretch fabric, and in sensory evaluation of good fit during movement.

• 한국정보과학회논문지:데이타베이스
• /
• 제31권3호
• /
• pp.261-273
• /
• 2004

정보 통신 기술의 발달은 데이타베이스 분야에도 새로운 응용들을 만들고 있다. 예를 들어, 수많은 객체들의 위치를 추적하는 이동 객체 데이타베이스나 각종 센서들로부터 들어오는 데이타 스트림을 처리하는 스트림 데이타베이스에서 다루는 데이타는 일반적으로 매우 빠르고 끊임없이 변경된다. 하지만, 전통적인 데이타베이스에서는 데이타를 사용자의 명시적인 변경이 있기 전까지는 변하지 않는 상대적으로 정적인 것으로 간주하고 있기 때문에, 전통적인 데이타베이스 시스템은 이러한 끊임없고 동적인 데이터의 변화를 효율적으로 처리하는데 문제를 지닌다. 특히 다차원 데이타 처리를 위한 대표적 인덱스 구조인 R-트리의 경우, 데이타의 삽입이나 삭제가 연속적인 노드의 분할이나 합병을 유발하고 있으므로 이러한 문제는 더 심각해진다. 본 논문에서는 이러한 빈번한 변경 효율적으로 처리하기 위하여 새로운 R-트리 갱신기법인 리프 갱신 기법을 제안한다. 리프 갱신 기법에서는 새로운 데이타가 이전에 속해있던 리프 노드의 MBR 내에 있으면 전체 트리를 변경하지 않고 해당 리프 노드만을 변경시킨다. 이러한 리프 갱신 처리와 리프 노드를 직접 접근하게 해주는 리프 접근 해시 테이블을 이용하여 리프 갱신 기법은 데이타의 변경연산 비용을 크게 줄인다. 제안기법은 기존 R-트리의 알고리즘과 구조를 그대로 이용하고, R-트리의 정확성을 보장하므로 다양한 R-트리 변종들에도 적용 가능하고 R-트리를 이용하는 다양한 응용 환경에 이용이 가능하다. 본 논문에서는 제안 기법이 기존 기법에 대하여 가지는 갱신 연산의 비용 이득을 수학적으로 분석하였고, 실험을 통하여 제안 기법의 우수성을 확인하였다.

• 응용통계연구
• /
• 제5권2호
• /
• pp.123-137
• /
• 1992

측우기와 근대 우량계로 관측한 서울의 연강수량 시계열을 분석하였다. 측우기로 관측된 1771년부터 1907년 사이의 강수량과 1908년 이후부터 1990년까지의 근대 우량계에 의한 강 수량 시계열을 특별한 보정없이 연결하여 사용하였다. 근대 우량계에 의한 후반부 자료는 기상청 발표자료이며 전반부의 고대 관측 자료는 와다가 측우기 자료를 이용하여 계산한 월 별 강수량을 단위 환산후 수록한 그의 저서 내부의 표1을 이용하였다. 전 분석기간을 3 부 분으로 분리가능하였으며 이를 객관화하기 위하여 원시 계열을 9년 이동평균하여 구한 시계 열과 년강수량 1050mm를 기준으로 사용하였다. 우리는 분석기간의 대부분을 습윤시기1, 건 조시기, 습윤시기2 로 분리 명명하였다. 통계적인 특성상 습윤시기1 과 2는 동일집단으로 간 주 가능하나 습윤시기와 건조시기는 그렇지 못하다. 통계적인 특성상 습윤시기 1과 2의 강 한 동질성은 측우기 자료의 신빙성을 높이는 것으로 해석할 수 있다. 이러한 결과는 고대 측우기 관측에 동반 되었을지 모르는 여러 가지 제약들, 예를 들면 관측 장소와 측정단위의 불명확성 그리고 서울의 도시화와 관련된 제반 기후 변화등을 고려하면 더욱 더 그러하다. 그러나 건조시기와 습윤시기의 강수 변동성을 정확하게 파악하기 위하여는 승정원 일기와 같은 고 문서에 산재하는 측우기로 관측된 일 강수량을 재 발굴하여 분석하는 것이 시급하다.

• 한국CDE학회논문집
• /
• 제15권3호
• /
• pp.212-221
• /
• 2010

Proposed in the paper is a methodology to generate kinematic template for 3D JIG models. Recently, according to increase of the rate of automatic facility in manufacturing system, the 3D manufacturing and verification research and development have been issued. So, unlike in the past, moving 3D facilities are very various like JIGs, turn table, AS/RS worked in the automated manufacturing industry. Because 3D mesh models are used in these kinds of 3D simulation, users have to define the kinematic information manually. This 3D mesh data doesn't have parametric information and design history of the 3D model unlike the design level data. So, it is lighter than 3D design level data and more efficient to render on the 3D virtual manufacturing environment. But, when user wants to find a common axis located between the links, the parameter information of the model has to reconstruct for defining kinematic construction. It takes a long time and very repetitive to define an axis and makes a joint using 3D mesh data and it is non-intuitive task for user. This paper proposed template model that provides kinematic information of the JIG. This model is kinds of a state diagram to describe a relation between links. So, this model can be used for a kinematic template to the JIG which has a same mechanism. The template model has to be registered in the template library to use in the future, after user made the model of the specific type of the 3D JIG model.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.792-795
• /
• 2005

The guide-ways of precision machine tools are one of important element of machine tools. It has usually a pair of surfaces for constraint of one direction with bearing. In the case of precision machine tools, non-contact bearing such as hydrostatic bearing and aerostatic bearing is adopted usually. In this case, profiles of rails has effect on straightness and the clearance of bearing has effect on stiffness of guide way, which changes to higher if clearance changes to smaller. The clearance is varied along moving table according to relative distance of pair of rails. The relative distance of pair of rail can be divided by three properties. First and second properties are straightness of each pair of rail and bearing pad. And, third is parallelism about pair of rails and pairs of bearing pad. There are several methods for measuring straightness of each surface such as reversal method, sequential two point method, and way straightness. These straightness measuring methods are always acquiring deviation of profile from eliminating linear fitted inclined line and don't have the information of parallelism. Therefore, to get the small clearance for high stiffness, the straightness of rail and bearing pad and parallelism about pair of rails and pair of bearing pads are measured for correction such as regrinding, reassembling and lapping. In this research, new and easy method for measuring parallelism of pair of rails is suggested. Two displacement probe and sensor stage, which is carry on the displacement sensor, are needed. The simulation and experiment was accomplished about pair of horizontal guide way to confirm the measurement of parallelism. And, the third probe is added to measure the straightness of each rails by sequential two point method. From the estimation of combined these two methods, it is confirmed that the profiles of a pairs of rails can be measured.

• 기본간호학회지
• /
• 제4권1호
• /
• pp.119-131
• /
• 1997

This study was conducted to analyze the nursing diagnoses applied for case studies of nursing students through their clinical practices, and to provide the educational basis of nursing diagnoses with its results. The data were collected for two years(1995 and 1996) from 70 case studies reported by the 2nd and 3rd year nursing junior college students. The students made 259 nursing diagnoses among which 230 diagnoses qualified NANDA classification and were taken for analysis. The results of the analysis were as follows : 1. The number of diagnoses indicating response patterns was 35(35.7%), whereas 98 diagnoses in NANDA table. Among the 35 diagnoses, the pattern of exchange was most frequent, then feeling, moving, knowing in rank. 2. The diagnoses were analyzed in the categories of response patterns. For Instance, 'Altered in Nutrition' was most frequent in exhange, then Risk for Infection', 'Ineffective Airway Clearance', in rank. 3. Among 230 diagnoses, 'Knowle Deficit' was most frequently mentioned, then 'Activity Intolerance' 'Anxiety', 'Pain', 'Altered in Nutrition', 'Risk for Infection', 'Ineffective airway clearance', in rank. 4. The types of word expression of each diagnoses were various. 'Activity Intolerance' was expressed in 6 types. 5. The relating factors applied to each diagnosis were analyzed. For Instance, the relating factor of 'Knowledge Deficit' were illness, and therapeutic process, lack of motivation, occurrance of complication, short experience, operation, and so on. From the above study, the researcher would like to recommend as follows : 1) The current diagnoses need to be verified its content validity, when they are applied to our culture. 2) The most effective educational method for applying nursing diagnoses should be explored. 3) Further study could be focused on not only 'relating factors' but also 'sign and symptoms'.

• 한국정밀공학회지
• /
• 제28권3호
• /
• pp.292-300
• /
• 2011

Control systems in machinery equipment provide correction signals to motion units in order to reduce or cancel out the mismatches between sensor feedback signals and command or desired values. In this paper, we introduce a simulator for control characteristics of machinery equipment. The purpose of the simulator development is to provide mechanical system designers with the ability to estimate how much dynamic performance can be achieved from their design parameters and selected devices at the designing phase. The simulator has a database for commercial parts, so that the designers can choose appropriate components for servo controllers, motors, motor drives, and guide ways, etc. and then tune governing parameters such as controller gains and friction coefficients. The simulator simulates the closed-loop control system which is built and parameter-tuned by the designer and shows dynamic responses of the control system. The simulator treats the moving table as a 6 degrees-of-freedom rigid body and considers the motion guide blocks stiffness, damping and their locations as well as sensor locations. The simulator has been under development for one and a half years and has a few years to go before the public release. The primary achievements and features will be presented in this paper.