• 한국안전학회지
• /
• 제12권3호
• /
• pp.60-66
• /
• 1997

In this paper, a moving object surveillance system, which can extract moving object in real-time, using image subtraction method is described. This technique based on the novelty filter having the structure of neural network associative memory. Digital arithmetic and timing control parts were composed of hardwired controller to treat two-dimensional massive image information. SRAMS having 20 ns access time were used for the image buffer that has high speed write/read property. Image extraction algorithm is discussed and supported by simulation and experiments.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제11권2호
• /
• pp.121-129
• /
• 2011

It is progressing as new advents and remarkable developments of mobile device every year. On the upper line reason, NAND FLASH large density memory demands which can be stored into portable devices have been dramatically increasing. Therefore, the cell size of the NAND Flash memory has been scaled down by merely 50% and has been doubling density each per year. [1] However, side effects have arisen the cell distribution and reliability characteristics related to coupling interference, channel disturbance, floating gate electron retention, write-erase cycling owing to shrinking around 20nm technology. Also, FLASH controller to manage shrink effect leads to speed and current issues. In this paper, It will be introduced to solve cycling, retention and fail bit problems of sub-deep micron shrink such as Virtual negative read used in moving read, randomization. The characteristics of retention, cycling and program performance have 3 K per 1 year and 12.7 MB/s respectively. And device size is 179.32 $mm^2$ (16.79 mm ${\times}$ 10.68 mm) in 3 metal 26 nm CMOS.

• 전자공학회논문지T
• /
• 제36T권2호
• /
• pp.32-41
• /
• 1999

CD(Compact Disc) 호환성을 가지는 고밀도 재생전용 및 기록재생용 DVD(Digital Video Disc) 기기의 광학픽업 2중 엑츄에이터 구조를 콤팩트하게 할 수 있는 단일 엑츄에이터 설계법을 제시한다. 설계된 엑츄에이터는 가동부에 CD용 대물렌즈와 DVD용 대물렌즈를 함께 장착하고, 사용 디스크에 따라 가동부를 축주위로 회전시켜서 대물렌즈를 전환하는 축습동형 구조를 하고, 자기 스프링에 의하여 부동된다. 감쇠방식으로서는 가동부와 축사이의 쿨롱마찰을 이용하고, 가동부는 유한요소법(FEM)을 통해, 서보대역내에서 2차 진동모드가 발생하지 않도록 한다. 본 논문의 설계법을 검증하기 위하여 시제품을 제작하고, 동특성을 측정, 평가한다.

• 한국컴퓨터정보학회논문지
• /
• 제11권1호
• /
• pp.87-96
• /
• 2006

선택을 추정은 질의 최적화를 위한 기법중의 하나이다. 이동객체에 대한 기존 선택율 추정 기법은 시간에 따른 이동객체의 위치 변화를 요약 정보에 반영하지 못하며. 또한 기존 공간 요약 정보를 확장하여 이용함으로써 선택율 추정시 많은 에러를 발생시키고 있다. 기존 기법들이 이동객체의 위치 정보 변화를 요약 정보에 반영하기 위해서는 요약 정보를 자주 재생성해야 하며, 그러므로 전체 데이터베이스를 자주 스캔해야 하는 문제점을 갖고 있다. 따라서 이 논문에서는 이동객체의 현재 질의에 대한 선택을 추정 기법을 개발하기 위하여 쿼드 트리 기반의 히스토그램 기법을 제안하였다. 또한 제안된 기법의 구현과 평가를 통해 제안된 기법의 성능을 분석하였다. 이 논문에서 제안된 기법은 차량 추적 시스템, 위치 기반 서비스, 응급 구조 서비스, 그리고 텔레매틱스 서비스 등과 같은 연속적으로 위치를 변경하는 이동객체의 정보를 실시간으로 관리하고 검색하는 응용분야에 활용 가능할 것이다.

• 정보저장시스템학회논문집
• /
• 제1권2호
• /
• pp.132-136
• /
• 2005

It is widely accepted that the reading mechanism of Super-RENS(super-resolution near field structure) and Super-ROM(super-resolution read only memory) is closely related with non-linear temperature dependent material properties such as refractive indices, phase change. Furthermore, the dynamic change of the temperature distribution also an essential part of reading mechanism of Super-RENS/ROM. Therefore, the knowledge of the temperature distribution as a function a time is one of the important keys to reveal the physics of reading mechanism in Super-RENS/ROM. We calculated time-dependent temperature distribution in a 3-dimensional Super-ROM disk structure when moving laser beam is irradiated. With a help of commercial software FEMLAB which employed finite element method, we simulated the temperature distribution of ROM structure whose pit diameter is 120-nm with 50-nm depth. Energy absorption by moving laser irradiation, time variations of heat transfer processes, heat fluxes, heat transfer ratios, and temperature distributions of the complicate 3-dimensional ROM structure have been obtained.

• 제어로봇시스템학회논문지
• /
• 제14권5호
• /
• pp.462-466
• /
• 2008

This paper proposes a stable gain scheduling method of linear time invariant controllers for tracking servo system. In order to read and write the data on the optical disc, the pick-up head should be moved to the exact track quickly and follow the track immediately. Two different controllers are used for each moving and track-following. In pull-in period, a transition period from moving to track-following, the head might slip and miss the target track. This brings on another searching process and increases the total time. One way to avoid slipping is to extend the bandwidth of the track-following controller. But, extending the bandwidth could degrade the following performance. More prevalent way is to use one more controller in this pull-in period and switch to the following controller. In general, however, switching or scheduling of stable controllers cannot guarantee the stability. This paper suggests an scheduling method guaranteeing the overall stability not only in a generalized form but also in special form for SISO system. The sufficient condition is derived from the fact that Q factor of a stable controller should be stay in $RH_{\infty}$ space. In the experiment, the proposed method shows better performance than the switching method such as shorter time and lower current consumption.

• 한국실내디자인학회논문집
• /
• 제20권1호
• /
• pp.165-172
• /
• 2011

Visitors' behaviors within an exhibition space are a substantial means to grant spatial arrangement and validity of exhibits. Therefore, the study analyzed visitors' behaviors in the viewpoint of attraction power and holding power of exhibits on the basis of exhibition layout of real science museums. Through the analysis, the study grasped efficiency of analysis index and exhibition environment elements which might have an effect on planning the exhibition space of a large-scale museum and producing detailed ranges of exhibition. The main indicators used are: 1. Attraction power: it indicates the relative incidence of people who have stopped in front of an object/exhibit during the exhibition tour. It is calculated by dividing the number of people who stop by the total number of people who have visited the museum or gallery. 2. Holding power: it measures the average time spent in front of an information/communication element. It is calculated by dividing the average time of stay by the time "necessary" to read an element. As a result, It was expected that attraction power and holding power of exhibit would be increased when moving line of seeing was inductive. However, when the traffic movements of seeing was inductive, repetitive seeing of exhibit was almost never realized and visitors had a strong tendency which viewed on their way of moving without viewing on their way of stopping. On the other hand, it may mean that density of exhibit is low or size of exhibition space is small that most of exhibits within exhibition space have high attraction power and holding power. As Gwacheon National Science Museum, when a museum is composed of many large-scale exhibit halls, it should be formed by separating the main moving line of seeing from the optional moving line of seeing through visitors' natural choice of exhibit and proper inducement of moving line of seeing. In such structure, exhibition environment of the main moving line has an effect on attraction of exhibit and the use of optional moving line acts as a factor to increase attraction. In addition, it is thought that attribute of exhibit and proper arrangement of rest space within exhibition space will increase holding power of exhibit.

• Journal of Advanced Marine Engineering and Technology
• /
• 제21권5호
• /
• pp.579-583
• /
• 1997

A diesel Engine rotates vibratively because of alternative explosion strokes. Traditional measurement of a diesel engine speed is carried out by measuring output voltage of FV convertor from input signals of MPU(magnetic pickup unit) or of DC tachometer. Because these measurement include also vibrative rotation of a diesel engine, an analog filter is often used to eliminate high frequency noises due to periodic explosion stroke. But by this method these high frequency noises do not eliminated effectively because noise frequencies are changed according to diesel engine speed. In this paper, author proposes a new measurement method of a diesel engine revolution which read digital signal directly from MPU and prove the utility of proposed method through the real experiment.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.486-489
• /
• 2006

This paper presents a newly proposed object-oriented finite element framework and its applications on dynamic analysis of plate girder bridge. The developed framework supports various types of finite elements, materials, constraints, loads, and solution methods. One major feature different from other object-oriented finite element programs is that static model and dynamic state can be easily read from or written to a file. In addition, the framework supports efficient DOF pattern handling for a node connecting elements with different DOF patterns, new multi-point constraint handling, and various scripting languages for easy use of the library. In order to show the applicability to dynamic analysis, dynamic moving load analysis on plate girder bridge is performed.

• 수산해양기술연구
• /
• 제16권1호
• /
• pp.43-47
• /
• 1980

The author designed and tested the high sensitive three-phase power factor meter and relay circuit, and dealt with the circuit to detect the phase of the current and the voltage. An operational amplifier comparator circuit and two single-phase transformers are used to control and detect the phase angle between the current and the voltage. The results obtained are as follows: 1. Converting the sine wave input current into the constant amplitude rectangular wave form by using a transistor chopper circuit, the power factor can be measured precisely over the load current of 0.08 A. 2. Using the moving coil type current meter, the power factor meter can be read in uniform . scale all over the range. 3. Using the three-phase power factor meter, the power factor relay which works at any power factor can be made.