• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.5
• /
• pp.451-456
• /
• 2005

This paper describes three kinds of experiments and analysis of their results related to human tactile sensitivity using an integrated tactile display system. The device can provide vibration, normal pressure and lateral slip/stretch which are important physical quantities to sense texture. We have tried to find out the efficient method of stimulating, limitation of surface discrimination by kinesthetic farce feedback and the effectiveness of the combination of kinesthetic force and tactile feedback. Seven kinds of different stimulating methods were carried out and they are single or combination of the kinesthetic force, normal static pressure, vibration, active/passive shear and moving wave. Both prototype specimen and stimulus using tactile display were provided to all examinees and they were allowed to answer the most similar sample. The experimental results show that static pressure is proper stimulus for the display of micro shape of the surface and vibrating stimulus is more effective for the display of fine surface. And the sensitivities of active touch and passive touch are compared. Since kinesthetic force feedback is appropriate to display shape and stiffness of an object, but roughness display has a limitation of resolution, the concurrent providing methods of kinesthetic and tactile feedback are applied to simulate physical properties during touching an object.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.659-662
• /
• 2005

Recently, the need for LBS (Location Based Services) is increasing with the rapid growth of the location measurement units, mobile devices, and communication technologies. Especially, wireless carriers are concentrating on LBS since it is regarded as so-called 'killer application' among wireless data services. Although LBS give us convenience and useful information, its use also raises privacy issues. There are quite possibilities that the people's locations are tracked by location measurement units while people do not recognize the existence of the units. To protect a person's location information, lawful and technical aspects should be considered. In this paper, we explain issues, regulations, standards, and platforms related to the protection of the location information. Finally, we suggest the architecture of a platform complying with the regulations and standards. It considers various issues not covered in other studies.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.249-252
• /
• 2004

The automatic determination of vehicle operation status as well as continuous tracking of vehicle location with intelligent management is one of major elements to achieve the goals. Especially, vehicle operation status can only be analyzed in terms of expert experiences with real-time location data with scheduling information. However the scheduling information of individual vehicle is very difficult to be interpreted immediately because there are hundreds of thousand vehicles are run at the same time in the national wide range workplace. In this paper, we propose the location-based knowledge management system(LKMs) using the active trajectory analysis method with routing and scheduling information to cope with the problems. This system uses an inference technology with dispatching and geographic information to generate the logistics knowledge that can be furnished to the manager in the central vehicle monitoring and controlling center.

• International Journal of Precision Engineering and Manufacturing
• /
• v.6 no.2
• /
• pp.34-39
• /
• 2005

The precision stage is an essential device for optic fiber assembly systems, micro machines and semiconductor equipments. A new piezoelectric inchworm type actuator is proposed to implement an actuator-integrated long-stroke linear stage. An in-and-quadrature phase (I/Q) heterodyne interferometer is developed as a feedback sensor of a servo system, and a synchronized counting method is proposed. The proposed measurement system can measure the accurate position of fast moving object with robustness to external sensing noise from actuator vibration. The developed servo stage will be applied to optic fiber device assembly system.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.283-285
• /
• 2003

This paper describes a data fusion method for high spatial resolution satellite imagery. The pixels located around an object edge have spectral mixing because of the geometric primitive of pixel. The larger a size of pixel is, the wider an area of spectral mixing is. The intensity of pixels adjacent edges were modified by the spectral characteristics of the pixels located inside of objects. The methods developed in this study were tested using IKONOS Multispectral and Pan data of a part of Jeju-shi in Korea. The test application shows that the spectral information of the pixels adjacent edges were improved well.

• The Journal of Korea Robotics Society
• /
• v.18 no.1
• /
• pp.53-58
• /
• 2023

In general, in order to operate an autonomous underwater vehicle (AUV) in an underwater environment, a navigation system such as a Doppler Log (DVL) using a Doppler phenomenon of ultrasonic waves is used for speed and direction estimation. However, most of the ultrasonic sensors in underwater is large for long-distance sensing and the cost is very high. In this study, not only canal neuromast on the fish's lateral lines but also superficial neuromast are studied on the simulation to obtain pressure values for each pressure sensor, and the obtained pressure data is supervised using spherical CNN. To this end, through supervised learning using pressure data obtained from a pressure sensor attached to an underwater vehicle, we can estimate the speed and angle of the underwater vehicle in a quasi-static underwater environment and propose a method for a non-ultrasonic based navigation system.

• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.922-932
• /
• 2018

Radial distance sensors are widely used for surveying and autonomous navigation. It is necessary to train the operation principle of these sensors and how to apply them. Although commercialization of radial distance sensor continues to be cost-effective through lower performance, but it is still expensive for educational purposes. In this paper, we propose a distance sensor module with object tracking using radial array of low cost phototransistor which can be used for educational robot. The proposed method is able to detect the position of a fast moving object immediately by arranging the phototransistor in the range of 180 degrees and improve the sensing angle range and track the object by the sensor rotation using the servo motor. The scan speed of the proposed sensor is 50~200 times faster than the commercial distance sensor, thus it can be applied to a high performance educational mobile robot with 1ms control loop.

• Fire Science and Engineering
• /
• v.32 no.6
• /
• pp.40-45
• /
• 2018

The omnidirectional surveillance camera uses the object detection algorithm to level the object by unit so that broadband surveillance can be performed using a fisheye lens and then, it was a field experiment with a system composed of an omnidirectional surveillance camera and a tracking (PTZ) camera. The omnidirectional surveillance camera accurately detects the moving object, displays the squarely, and tracks it in close cooperation with the tracking camera. In the field test of flame detection and temperature of the sensing camera, when the flame is detected during the auto scan, the detection camera stops and the temperature is displayed by moving the corresponding spot part to the central part of the screen. It is also possible to measure the distance of the flame from the distance of 1.5 km, which exceeds the standard of calorific value of 1 km 2,340 kcal. In the performance test of detecting the flame along the distance, it is possible to be 1.5 km in width exceeding $56cm{\times}90cm$ at a distance of 1km, and so it is also adaptable to forest fire. The system is expected to be very useful for safety such as prevention of intrinsic or surrounding fire and intrusion monitoring if it is installed in a petroleum gas storage facility or a storing place for oil in the future.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.4
• /
• pp.55-60
• /
• 2010

Rodents can recognize objects by using their whiskers. Not only rodents but also mammals use their whiskers to recognize objects. However, rodents can discriminate surface roughness in micrometer resolution throughout their whisker sensing. Rats can distinguish an target object's shape, roughness and surface pattern by moving their whisker back and forth freely. Mechanoreceptors surrounding the whisker in their follicle measure deflection and vibration of the whisker. In this paper, we designed biomimetic whiskers modeling rodent whiskers and showed the characteristic properties to extract the information of surface roughness.

• The KIPS Transactions:PartB
• /
• v.16B no.6
• /
• pp.435-442
• /
• 2009

We propose an annotation system, which allows users moving on an environment to receive personalized messages that are generated by exploiting contextual information. In the system, the context is defined as an entity including user's identity, location and time. Identity of user is a key data to enable personal aspect of generated message. For sensing the context, the proposed system uses AR(augmented reality) technology. Markers are attached to real objects for tracking user's location. AR can provide an effective annotating method to enhance human's perception and interaction abilities. The received message can be a virtual post-it or three-dimensional virtual model of object overlaid onto the real-world view. Experimental results show that the proposed system works well in real-time with high performance and it can be used as a mobile service for personalized messaging.