• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.53-60
• /
• 2002

Motion of lung tumors from respiration has been reported in the literature to be as large as of 1-2 cm. This motion requires an additional margin between the Clinical Target Volume (CTV) and the Planning Target Volume (PTV). While such a margin is necessary, it may not be sufficient to ensure proper delivery of Intensity Modulated Radiotherapy (IMRT) to the CTV during the simultaneous movement of the DMLC. Gated treatment has been proposed to improve normal tissues sparing as well as to ensure accurate dose coverage of the tumor volume. The following questions have not been addressed in the literature: a) what is the dose error to a target volume without gated IMRT treatment\ulcorner b) what is an acceptable gating window for such treatment. In this study, we address these questions by proposing a novel technique for calculating the 3D dose error that would result if a lung IMRT plan were delivered without gating. The method is also generalized for gated treatment with an arbitrary triggering window. IMRT plans for three patients with lung tumor were studied. The treatment plans were generated with HELIOS for delivery with 6 MV on a CL2100 Varian linear accelerator with a 26 pair MLC. A CTV to PTV margin of 1 cm was used. An IMRT planning system searches for an optimized fluence map ${\Phi}$ (x,y) for each port, which is then converted into a dynamic MLC file (DMLC). The DMLC file contains information about MLC subfield shapes and the fractional Monitor Units (MUs) to be delivered for each subfield. With a lung tumor, a CTV that executes a quasi periodic motion z(t) does not receive ${\Phi}$ (x,y), but rather an Effective Incident Fluence EIF(x,y). We numerically evaluate the EIF(x,y) from a given DMLC file by a coordinate transformation to the Target's Eye View (TEV). In the TEV coordinate system, the CTV itself is stationary, and the MLC is seen to execute a motion -z(t) that is superimposed on the DMLC motion. The resulting EIF(x,y)is inputted back into the dose calculation engine to estimate the 3D dose to a moving CTV. In this study, we model respiratory motion as a sinusoidal function with an amplitude of 10 mm in the superior-inferior direction, a period of 5 seconds, and an initial phase of zero.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.2
• /
• pp.163-172
• /
• 2005

When tracking a human face in the moving pictures with complex background under irregular lighting conditions, the detected face can be larger including background or smaller including only a part of the face. Even background can be detected as a face area. To solve these problems, this paper proposes a new face tracking method using a block difference image and a Kalman estimator. The block difference image allows us to detect even a small motion of a human and the face area is selected using the skin color inside the detected motion area. If the pixels with skin color inside the detected motion area, the boundary of the area is represented by a code sequence using the 8-neighbor window and the head area is detected analysing this code. The pixels in the head area is segmented by colors and the region most similar with the skin color is considered as a face area. The detected face area is represented by a rectangle including the area and its four vertices are used as the states of the Kalman estimator to trace the motion of the face area. It is proved by the experiments that the proposed method increases the accuracy of face detection and reduces the fare detection time significantly.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.4
• /
• pp.429-434
• /
• 2011

Bulk cargo loaded into ship can be damaged by various kinds reasons. This paper aims to analyze about cargo damage of coil carrier ship due to condensation. Condensation is the formation of liquid drops of water from water vapor. Condensation consists of small drops of water which form when warm water vapour or steam touches a cold surface such as a window. In general, condensation have occurred by temperature difference at large building and ship's tank. It is phenomenon that can occur often to oceangoing vessel moving temperature difference places in similar time. This paper proposes a new method using dehumidification device and fan heater to prevent bulk cargo damage of coil carrier ship from condensation.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.1
• /
• pp.21-28
• /
• 2000

Although commercial PIV systems have been widely used for the non-intrusive velocity field measurement of fluid flows, they are still under development and have considerable room for improvement. In this study, a single-frame double-exposure PIV system using a high-resolution CCD camera was developed. A pulsed Nd:Yag laser and high-resolution CCD camera were synchronized by a home-made control circuit. In order to resolve the directional ambiguity problem encountered in the single-frame PIV technique, the second particle image was genuinely shifted in the CCD sensor array during the time interval dt. The velocity vector field was determined by calculating the displacement vector at each interrogation window using cross-correlation with 50% overlapping. In order to check the effect of spatial resolution of CCD camera on the accuracy of PIV velocity field measurement, the developed PIV system with three different resolution modes of the CCD camera (512 ${\times}$ 512, lK ${\times}$ IK, 2K ${\times}$ 2K) was applied to a turbulent flow which simulate the Zn plating process of a steel strip. The experimental model consists of a snout and a moving belt. Aluminum flakes about $1{\mu}m$ diameter were used as scattering particles for the liquid flow in the zinc pot and the gas flow above the zinc surface was seeded with atomized olive oil with an average diameter of 1-$3{\mu}m$. Velocity field measurements were carried out at the strip speed $V_s$=1.0 m/s. The 2K ${\times}$ 2K high-resolution PIV technique was significantly superior compared to the smaller pixel resolution PIV system. For the cases of 512 ${\times}$ 512 and 1K ${\times}$ 1K pixel resolution PIV system, it was difficult to get accurate flow structure of viscous flow near the wall and small vortex structure in the region of large velocity gradient.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2002.05a
• /
• pp.227-230
• /
• 2002

The Loose Part Monitoring System(LPMS) has been designed to detect, locate and evaluate detached or loosened parts and foreign objects in the reactor coolant system. In this paper, at first, we presents an application of the back propagation neural network. At the preprocessing step, the moving window average filter is adopted to reject the low frequency background noise components. And then, extracting the acoustic signature such as Starting point of impact signal, Rising time, Half period, and Global time, they are used as the inputs to neural network. Secondly, we applied the neural network algorithm to LPMS in order to estimate the mass of loose parts. We trained the impact test data of YGN3 using the backpropagation method. The input parameter for training is Rising Time, Half Period, Maximum amplitude. The result showed that the neural network would be applied to LPMS. Also, applying the neural network to the Practical false alarm data during startup and impact test signal at nuclear power Plant, the false alarms are reduced effectively. 1.

• Microbiology and Biotechnology Letters
• /
• v.21 no.4
• /
• pp.354-365
• /
• 1993

A novel control method with automatic tuning of PID controller parameters has been developed for efficient regulation of dissolved oxygen concentration in fed-batch fermentations of Escherichia coli. Agitation speed and oxygen partial pressure in the inlet gas stream were chosen to be the manipulated variables. A heuristic reasoning allowed improved tuning decisions from the supervision of control performance indices and it coule obviate the needs for process assumptions or disturbance patterns. The control input consisted of feedback and feedforword parts. The feedback part was determined by PID control and the feedforward part is determined from the feed rate. The proportional gain was updated on-line by a set of heuristics rules based on the supervision of three performance indices. These indices were output error covariance, the average value of output error, and input covariance, which were calculated on-line using a moving window. The integral and derivative time constants were determined from the period of output response. The specific growth rate was maintained at a low level to avoid acetic acid accumulation and thus to achieve a high cell density. The specific growthe rate was estimated from the carbon dioxide evolution rate. In fed-batch fermentation, the simutaneous control of dissolved oxygen concentration (at 0.2; fraction of saturated value) and specific growth rate (at 0.25$hr^{-1}$) was satisfactory for the entire culture period in spite of the changes in the feed rate and the switching of control input.

• International Journal of Automotive Technology
• /
• v.8 no.3
• /
• pp.259-268
• /
• 2007

A knock detection circuit that is based on the signal of an accelerometer installed on the engine block of a spark ignition automotive engine has a band-pass filter with a certain frequency as a parameter to be calibrated. A new statistical method for the determination of the frequency which is the most suitable for the knock detection in real-time applications is proposed. The method uses both the cylinder pressure and block vibration signals and is divided into two steps. In both steps, a new recursive trigonometric interpolation method that calculates the frequency contents of the signals is applied. The new trigonometric interpolation method developed in this paper improves the performance of the Discrete Fourier Transformation, allowing a flexible choice of the size of the moving window. In the first step, the frequency contents of the cylinder pressure signal are calculated. The knock is detected in the cylinder of the engine cycle for which at least one value of the maximal amplitudes calculated via the trigonometric interpolation method exceeds a threshold value indicating a considerable amount of oscillations in the pressure signal; this cycle is selected as a knocking cycle. In the second step, the frequency analysis is performed on the block vibration signal for the cycles selected in the previous step. The knock detectability, which is an individual cylinder attribute at a certain frequency, is verified via a statistical hypothesis test for testing the equality of two mean values, i.e. mean values of the amplitudes for knocking and non-knocking cycles. Signal-to-noise ratio is associated in this paper with the value of t-statistic. The frequency with the largest signal-to-noise ratio (the value of t-statistic) is chosen for implementation in the engine knock detection circuit.

• Korean Institute of Interior Design Journal
• /
• v.22 no.4
• /
• pp.52-61
• /
• 2013

This study set out to compare and analyze the spaces in the images and sets of the representative movies that led the new heyday of Korean film since 1997 and examine the characteristics of contemporary Korean modernism in the movies, thus building an academic foundation for future exchanges between contemporary Korean architecture and contemporary Korean cinema. As for methodologies, the study first examined the film theories on how to utilize spaces projected onto moving images. Secondly, the study made an overall comparison of the characteristics of spaces in the representative movies of contemporary Korean cinema since 1997. Finally, the study compared and analyzed them with the intrinsic characteristics of modernism architecture space. The research findings were as follows: first, the representative movies of contemporary Korean cinema since 1997 either had a backdrop of everyday modernism space in the 1970s and 1980s or created a new space of late or post modernism in them that escaped from daily life for the mise-en-$Sc\grave{e}ne$ composition. Secondly, the contemporary Korean cinemas used the unornamented modernism architecture in Korea as the props of revealing the personalities and emotional aspects of the characters in a prominent fashion. Thirdly, they also used communication between internal and external space and spatial severance via the facade window in modernism architecture as important devices for narration organization. Finally, they selected the camera positions by applying the principle of open space, which allows for the expansion, reduction, and distinction of space according to functions, and thus established a methodology to create a space fit for the personalities of characters and stories.

• Journal of Korea Multimedia Society
• /
• v.4 no.5
• /
• pp.446-454
• /
• 2001

A long-distance education method using the computational environment has been developed and implemented for quite some time. However, there has been some difficulty in the simulation of face-to-face instruction due to limitations in performance of the computers and the networks. Continued development of multimedia technologies has now made it possible to simulate face-to-face instruction, recording the teachers' instructions in the form of a screen dump. In this paper, we propose a system that allows the teacher to make loaming materials available on the Web using Window Media Technology(WMT). This technology also allows remote site users to view the contents at their convenience. A media encoder acquires the lessons and stores them as moving pictures. The lessons are displayed on the screen as the teacher explains them. The learning materials are stored in a Windows media file format, the file is stored on a lecture server and provided to the user using a streaming method in real time. The users can view the contents on the Web without requiring a special player. The proposed system consists of a lecture writer module, a lecture server module and a lecture client module.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.2
• /
• pp.131-140
• /
• 2011

Smart packet agent is an application that is proposed to provide routing protocol and service module in ubiquitous network environment. However, it uses multi-hop broadcast, thus it causes increasing network traffic, low-speed data transmission, and the unnecessary joining nodes. In this paper, a transmit technique that uses unicast-based multi-hop to have lower network traffic and faster transmission time than the multi-hop broadcast technique. In our scheme, u-Zone Master establishes temporary routing paths by calculating moving nodes' hop-counter. Therefore, it reduces smart packet agent's network traffic and retransmission rate. Besides, this paper proposed an UDP transmission that bases on sliding window. Hence, the Stop & Wait transmission speed is improved. The results, which are taken by analyzing performance prove that the proposed scheme has better performance.