• Asian-Australasian Journal of Animal Sciences
• /
• 제29권1호
• /
• pp.149-156
• /
• 2016

In this experiment, we proposed and implemented a disease forecasting system using a received signal strength indication ZigBee-based wireless network with a 3-axis acceleration sensor to detect illness at an early stage by monitoring movement of experimentally infected weaned piglets. Twenty seven piglets were divided into control, Salmonella enteritidis (SE) infection, and Escherichia coli (EC) infection group, and their movements were monitored for five days using wireless sensor nodes on their backs. Data generated showed the 3-axis movement of piglets (X-axis: left and right direction, Y-axis: anteroposterior direction, and Z-axis: up and down direction) at five different time periods. Piglets in both infected groups had lower weight gain and feed intake, as well as higher feed conversion ratios than the control group (p<0.05). Infection with SE and EC resulted in reduced body temperature of the piglets at day 2, 4, and 5 (p<0.05). The early morning X-axis movement did not differ between groups; however, the Y-axis movement was higher in the EC group (day 1 and 2), and the Z-axis movement was higher in the EC (day 1) and SE group (day 4) during different experimental periods (p<0.05). The morning X and Y-axis movement did not differ between treatment groups. However, the Z-axis movement was higher in both infected groups at day 1 and lower at day 4 compared to the control (p<0.05). The midday X-axis movement was significantly lower in both infected groups (day 4 and 5) compared to the control (p<0.05), whereas the Y-axis movement did not differ. The Z-axis movement was highest in the SE group at day 1 and 2 and lower at day 4 and 5 (p<0.05). Evening X-axis movement was highest in the control group throughout the experimental period. During day 1 and 2, the Z-axis movement was higher in both of the infected groups; whereas it was lower in the SE group during day 3 and 4 (p<0.05). During day 1 and 2, the night X-axis movement was lower and the Z-axis movement was higher in the infected piglets (p<0.05). Overall, the movement of infected piglets was altered, and the acceleration sensor could be successfully employed for monitoring pig activity.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1245-1248
• /
• 2004

This paper presents a new technique to analyze data on the coordinate x, y, z and apply these data to design the motion control to improve the efficiency of the engraving machine so that it can engrave accordingly in 3 dimensions. First, the tool path on the x-y plane is analyzed to be synchronized with the z-axis. The digital data is then sent to the motion control to guide the movement of the engrave point on the x-y plane. Tool path moves along the x-axis with zero degree and different values of the y-axis according to the coordinate of the digital data and the analysis along z-axis to determine the depth for engraving. The depth can be specified from the gray level with the 256 levels of resolution. The data obtained includes the distances on x-axis, y-axis, and z-axis, the acceleration of the engrave point's movement, and the speed of the engrave point's movement. These data is then transfered to the motion control to guide the movement of the engrave point along the z-axis associated with the x-y plane. The results indicate that engraving using this technique is fast and continuous. The specimen obtained looks perfect in 3D view.

• 대한정형도수물리치료학회지
• /
• 제22권2호
• /
• pp.51-56
• /
• 2016

Background: The purpose of this study is to compare axis change during cervical flexion and extension according to lordosis angle to patients with scoliosis. Methods: Movement axis change was estimated during cervical flexion and extension in twenty-four scoliosis patients with hypolordosis using radiography. Subjects were divided into mild lordotic curve group (MLCG, n=12, $34{\sim}25^{\circ}$) and severe lordotic curve group (SLCG, n=12, less $25^{\circ}$) according to cervical lordosis angle. Results: During cervical flexion, both group showed movement axis change to upper part of cervical vertebra and SLCG showed greater than MLCG but there is no significant difference. During cervical extension, SLCG showed greater than MLCG and there is significant difference. Conclusion: It is considered that cervical hypolordosis acts as important factor to scoliosis and degenerative joint disease because it leads to change of movement axis and central route of joint.

• 수산해양기술연구
• /
• 제58권4호
• /
• pp.289-298
• /
• 2022

Sea anchor for fishery is commonly used in jigging fishery and purse seine. The study of sea anchor was studied for improvement of opening efficiency and drag by changing the type of shape and the diameter of vent. However, standard specification of sea anchor is not set and has not been studied for underwater stability. Therefore, this study aimed to improve underwater stability of sea anchor by changing a vent diameter and weight of sinker. The experiment was conducted in flume water tank. The experiment model of sea anchor was made from actual model of sea anchor which is used in fishery by similarity law. The model of sea anchor was designed to different types of vent diameter and weight of sinker in different current speed. The value of movement of side to side (X-axis), drag of sea anchor (Y-axis) and movement of up and down (Z-axis) was measured for 30 seconds. Each value of X, Y, Z-axis was analyzed through t-test and ANOVA analysis to verify that each value had a significant difference according to the difference compositions. There was correlation between the movement of X-axis and Z-axis. The drag of sea anchor was stronger as the current speed increased. However, the larger the vent diameter, the weaker the drag. From the result of the standard deviation, the movement of X-axis was inversely proportional to the vent diameter. However, movement of Z-axis was larger as the weight of sinker was the heaviest or lightest from the result of the standard deviation. These results suggest that the sea anchor should be combined with proper size of the vent diameter and the weight of sinker to improve the stability.

• 대한통합의학회지
• /
• 제10권4호
• /
• pp.1-9
• /
• 2022

Purpose : The purpose of this research is to propose a more efficient exercising method by measuring and comparing the movement of center of pressure (COP) while hemiplegic stroke patients perform kneeling squat exercise and squat exercise. Methods : 17 hemiplegic stroke patients were instructed to perform kneeling squat exercises and squat exercises, and the research was designed as a cross-over study. For data collection, a pressure distribution measurement platform (PDM) was used to measure the movement area, length, speed, and distance from the center of the X-axis of center of pressure. The data was then analyzed through a paired t-test. Results : Kneeling squat exercises have been found to have a significantly smaller center of pressure movement area compared to that of squat exercise(p<.001), and the center of pressure movement length of kneeing squat exercise has also been found to be relatively shorter (p<.001). Moreover, kneeling squat exercises have been found to have a significantly slower center of pressure movement speed than squat exercise (p<.001), and kneeing squat exercise center of pressure movement distance from the center of the X-axis has been found to be significantly small (p<.001). Conclusion : Kneeling squat exercises have significantly decreased amounts of center of pressure movement area, distance, and speed compared to squat exercises. Also, the center of pressure movement distance from the center of the X-axis was relatively closer. This result seems to derive from patients performing their motions with wide base surfaces while being refrained from using unstable ankle joints during kneeing squat exercise. Therefore, it can be concluded that kneeing squat exercises show relatively balanced center of pressure movements between the paralyzed and non-paralyzed sides because kneeling squats show smaller shakes in the center of pressure.

• 대한치과보철학회지
• /
• 제25권1호
• /
• pp.119-135
• /
• 1987

For the determination of instantaneous centre of rotation in the mandibular movement, the habitual opening path was recorded on the sagittal tracing plate by a Gnathorecorder attached on the lower anterior teeth which was designed for this study. The opening path was demonstrated mathematically and the instantaneous centre of rotation in the opening path were calculated and plotted by computer programs, and then a computer graphic movement of the mandible was obtained according to the opening path. The hinge path of posterior border movement was graphied by the Gnathorecorder as well and demonstated mathematically. This hinge path was compared with the same obtained by Visitrainer to prove a reliability of the Gnathorecorder. The results obtained from this study were as follows. 1. The habitual opening path and hinge path obtained from the Gnathorecorder movement were expressed mathematically as follows: $y=0.11x^2-0.66x+3.09$ (equation of opening path), $y=0.04x^2+0.21x+3.71$ (equation of hinge path), and a kinematic hinge axis was not shown in the equation of kings path. 2. The early habitual opening movement of the mandible demonstrated almost a straight opening path or an arc motion with the larger radius and it's centre of rotation moved parallelly in the more rear and lower position than a kinematic hinge axis. 3. Instantaneous centre of rotation occured along with the translation of the condyle, and mandible was rotated around an axis in the close to the maximum opening and then moved toward the forward and upward position. 4. There were some similarities between the articular eminence and the movement pattern of a special point which was the kinematic hinge axis.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.403-406
• /
• 1996

In this paper, the geometry between horizontal and vertical movement of lens is studied for automatic vergence control of horizontal moving axis stereo camera. When the disparity of stereo remains contant, the horizontal movement of camera lens for image disparity and the vertical movement for image focus have linear geometry. Using this linearity, we can control the vergence of stereo camera only by focusing of stereo camera lens.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 1999년도 추계학술대회 논문집
• /
• pp.111-114
• /
• 1999

Off-vertical axis rotator was developed to differentiate each function of the canal and otolith in the vestibular system and evaluate subjective symptoms during postural change. Eye movement induced by various types of rotation was measured in normal subjects. Nystagmus with fast component corresponding to direction of rotation was occurred by sinusoidal earth vertical axis rotation, and the gain of eye movement in vestibuloocular reflex (VOR) was lower than in visual vestibuloocular reflex (VVOR) and higher than in visual fixed vestibuloocular reflex (VFX). Degree of dizziness was proportioned to degree of gain. off-vertical axis rotation was produced severe dizziness than earth vertical axis rotation. These results suggest stimulation of the otolith should be minimized to make a stable and pleasant condition in work and travel.

• 대한방사선치료학회지
• /
• 제23권1호
• /
• pp.31-39
• /
• 2011

목 적: 카우치의 회전없이 갠트리 회전에 국한된 토모테라피 치료 시 환자머리의 각도를 올려 non-coplanar 빔처럼 치료하는 방법을 모색하였다. 이러한 방식의 토모테라피 치료 시 환자자세와 구강고정기구의 사용으로 인한 치료시 환자의 움직임을 분석하여 임상 치료에 이와 같은 결과를 참조하여 보다 정밀하고 정확한 치료를 하는데 도움을 주고자 한다. 대상 및 방법: 나선형 토모테라피를 이용하여 방사선 치료를 받는 뇌종양 환자 8명을 대상으로 모의치료 시 기존의 방식대로 앙와위(supine)자세에서 2명의 환자는 S-plate를 사용하여 환자의 머리를 원래대로 똑바로 하고 머리고정장치(thermoplastic mask)를 사용하였고, 3명의 환자는 S-plate에 Variable Axis Baseplate를 장착하여 머리의 각도를 올린 후 머리고정기구를 사용하였으며, 나머지 3명의 환자는 두 번째 그룹의 환자들과 동일한 방법으로 머리를 올린 후 환자가 아래로 밀려 내려가는 것을 줄이고자 하는 방안으로 구강고정기구(mouthpiece immobilization device)와 머리고정기구를 사용하였다. 토모테라피 치료 계획용 장비로 치료계획을 세운 후 치료를 시행하였다. 치료 시 초고압 전산화단층 촬영(Megavoltage computed tomography; MVCT)을 치료 후에 한번 더 시행하여 lateral (X), longitudinal (Y), and vertical (Z) 각 방향의 이동값을 확인하고 전체의 움직임을 vector값($\sqrt{x^2+y^2+z^2}$)으로 계산하여 치료 중 오차를 살펴보고 정상 뇌를 포함한 결정장기에 들어가는 선량을 비교하였다. 결 과: 세 그룹으로 나누어 X, Y, Z, vector값으로 치료 중 오차를 비교하였다. 치료 전 MVCT의 보정 값으로 이동하여 치료하고 난 후 그대로 치료 후 MVCT를 시행한 후의 보정 값(X, Y, Z)은 0에 가까워야 환자의 움직임이 적은 것으로 알 수가 있다. Variable Axis Baseplate과 S-plate를 사용하여 머리의 각도를 올린 상태로 치료한 환자를 똑바로 치료한 환자와 비교했을 때, 머리를 기울여서 치료하다 보니 X축에 비해(13% 감소) 아래로 밀려 Y (109% 증가), Z (88% 증가)축의 이동값이 상대적으로 컸다. 머리를 기울인 후, 구강고정기구를 사용한 경우는 사용하지 않은 그룹보다 X축의 이동은 평균값이 9.4% 증가하였지만, 상대적으로 움직임이 많았던 Y축은 이동의 평균값이 64% 이상, Z축은 평균값이 67% 이상, vector값은 59% 이상 감소하였다. 8명의 환자 중 전두엽과 기저핵의 왼쪽에 종양이 위치한 환자의 경우 non-coplanar 방식으로 치료할 경우, 선량의 평균값이 오른쪽 눈에는 38%, 왼쪽 눈에는 23%, 시신경교차에는 30%, 뇌간에는 27%, 정상 뇌에는 8% 감소하는 결과를 보였다. 결 론: Coplanar 방식의 IMRT 치료만 가능한 토모테라피는 이러한 단점을 보완하기 위해 종양이 결정장기 주위에 있거나 고선량으로 치료해야 하는 경우 인위적으로 머리를 기울이고 구강고정기구를 함께 사용하여 환자의 움직임을 최소화하면서 non-coplanar 방식을 적절히 사용할 수 있을 것으로 사료된다.

• 대한산업공학회지
• /
• 제26권1호
• /
• pp.73-80
• /
• 2000

To determine the exact direction and location of the human joint in motion is crucial in developing a more accurate human model and producing a more fitting artificial joint. There have been several reports on the biomechanical analysis of the joint to determine the anatomy and movement of joints. However, all the previous researches were made in vitro study, that is, they investigated the passive movement of the joint from cadavers and the suggested location of the joint axis was difficult to make practical applications due to the lack of the direction of joint axis. Also, in many biomechanical models, each joint axis is assumed to lie horizontally or vertically to the adjacent links. Such an assumption causes inherent inaccuracy. In this study, the direction and location of the transverse elbow axis was obtained with respect to the global coordinate system whose origin is on the lateral epicondyle of the humerus. The suggested result based on the global coordinate system lying on the external landmark will be helpful to understand the information of the axis and to make an application. From the experiments conducted for five subjects, the direction and location of the elbow transverse joint was determined for each subject by the helical axis method. A statistical validation was also performed to confirm the result. Finally, the result was applied to develop a simple elbow model which is a part of the kinematic arm model. The simple elbow movement model was developed to validate the significance of the result and the kinematic arm model was able to describe the geometry of any complex linkage system. As a result, the errors incurred from the proposed model were significantly reduced when compared to the ones from the previous approach.