• The Journal of Korean Physical Therapy
• /
• v.15 no.4
• /
• pp.412-430
• /
• 2003

Functional stability is dependent on integrated local and global muscle function. Movement dysfunction can present as a local and global problem, though both frequently occur together. To good understand how movement induces pain syndrome, the optimal actions and interaction of the multiple anatomic and functional systems involved in motion must be considered. Minor alterations in the precision of movement cause microtrauma and, if allowed to continue, will cause macrotrauma and pain. These alteration of the movement result in the development of compensatory movement and movement impairment. Muscle that become tight tend to pull the body segment to which they are attached, creating postural deviation. The antagonistic muscles may become weak and allow postural deviations due to lack of balanced support. Both hypertonic and inhibited muscles will cause an alteration of the distribution of pressure over the joint(s) that they cross and, thus, may not only result from muscle dysfunction, but produce joint dysfunction as well. Alteration of the shoulder posture and movement dysfunction may sometimes result in compression of neurovascular structures in the shoulder and arm. There is a clear link between reduced proprioceptive input, altered motor unit recruitment and the neurovascular compression. This report start with understanding of the impaired alignment, movement patterns and neuromuscular compression of the shoulder girdle by movement impairment to approach method of the movement dysfunction.

• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.4
• /
• pp.549-564
• /
• 1993

The purpose of this study was to research the condylar path and the anterior angle of glenoid fossae and classify the patterns of condylar path. Thirty male and female dental students with normal occlesion and masticatory system ranging in age from 21 to 30, without present symptoms and an)r history of TM joint disturbance, were selected for this study. Transcranial radiographs of TM joints under mandibular lateral movement were obtained. By the computer analysis on the radiographs, the angle of posterior slope of articular eminance, the sagittal condylar guidance angie, condylar movement patterns and the height of glenoid fossa was measured respectively, and studied their interrelationship comparatively. The results obtained were as follows : 1. The total distance of condylar movement on balancing side during mandibular lateral movement was 4.55mm for Lt. and 4.78mm for Rt. when mandible moved from C.R. to canine to canine relation and 7.86mm for the Lt. and 8.10mm for the Rt. when mandible moved from C.R. to 7.5mm. 2. The horizontal distance of condylar movement on balancing side during mandibular lateral movements was 3.16mm for the Lt. and 3.52mm for the Rt. when mandible moved from C.R. to canine to canine relation and 6.10mm for the Lt. and 6.30mm for the Rt. when mandible moved from C.R. to 7.5mm. 3. The sagittal condylar guidance angle on balancing side during mandibular lateral movements was $45.96^{\circ}$ for the Lt. and $43.22^{\circ}$ for the Rt. when mandible moved from C.R. from canine to canine relation and $41.14^{\circ}$ for the Lt. and $39.77^{\circ}$ for the Rt. when mandible moved from C.R. to 7.5mm. 4. The height of glenoid fossa was 8.23mm for the Lt. and 7.80mm for the Rt. and the angle of posterior slope of articular eminence was $38.30^{\circ}$ for the Lt. and $38.79^{\circ}$ for the Rt. by method-A and $55.61^{\circ}$ for the Lt. and $55.64^{\circ}$ for the Rt. by method-B. 5. The sequence of the frequency of condylar movement patterns on balancing side during mandibular lateral movement were concave type(30 cases), convex type(16 cases), reverse S shape curve(9 cases) and S shape curve(5 cases) when mandible moved from C.R. to canine to canine relation and concave type(27 cases), 5 shape curve(13 cases), convex type(11 cases) and reverse S shape curve(9 cases) when mandible moved from C.R. to 7.5mm.

• The Journal of Korean Physical Therapy
• /
• v.10 no.1
• /
• pp.213-221
• /
• 1998

The purpose of this study was a motion analysis of proprioceptive neuromuscular facilitation patterns which is scapular and pelvis patterns, upper extremity patterns, lower extremity patterns, trunk patterns. The patterns combine motion in sagittal plane for flextion and extension, coronal or frontal plane for abduction and adduction, transverse plane for rotation. The patterns composed of mass movement pattern of the limbs and trunk muscles. Every pattern can change by changing the activity of the middle joint in the extremity patterns and changing the patient's positions.

• The Journal of Korean Physical Therapy
• /
• v.23 no.5
• /
• pp.7-14
• /
• 2011

Purpose: The purpose of this study was to describe the movement patterns when lying from an erect stance to a supine position of healthy adults and hemiplegia patients in the age group from 50 to 70. Methods: The subjects used in this study were 230 patients (144 healthy adults and 86 hemiplegia patients). Movement patterns were classified using categorical descriptions of the action of three body regions: the upper extremity, lower extremity, and the head-trunk region. Results: In the most common supine lying position in healthy adults (29.7%), the female fifties age group performed a symmetrical pattern using the upper extremity region, a symmetrical squat pattern using the lower extremity region, and a symmetrical pattern using the head-trunk region (1-1-1). However, in the most supine lying position in hemiplegia patients (32.0%), the female sixties age group usually performed this pattern by using the upper extremity and lower extremity regions in a squat position by raising the leg, and performing rotation of the head-trunk region (3-4-3). Conclusion: Using this clinical therapy, and considering the patients ability to exercise when lying from an erect stance to a supine position, the proper care could be provided. Moreover, this therapy introduces action based on a variety of training methods and on the effects which might result from any changes.

• The Journal of Korean Academy of Prosthodontics
• /
• v.27 no.2
• /
• pp.143-154
• /
• 1989

The purpose of this study was to investigate the mandibular opening and closing movements at mandibular incisor region and clinical rest position in normal subject using the newly developed electric mandibular movement analyzing device, (M.K.G.-K6 diagnostic system, Myo-tronics Inc. Seattle, WA, U.S.A.) The 58 normal subjects, who were students of the College of Dentistry, Chonbuk National University, were selected according to sampling criteria. The obtained results were as follows: 1. There was no significant difference of distribution of opening and closing movement patterns at mandibular incisor region between male and female. There was significant difference between habitual and maximum movement patterns both in sagittal and frontal plane. 2. Although the percentage of distribution of crossover pattern was highest in all cases, but there were significant differences between patterns only at habitual opening and closing movement in sagittal plane. 3. The mean of maximum opening was $47.29{\pm}4.68mm$ in male and $42.15{\pm}4.95mm$ in female. Therefore the mean of maximum opening was larger in male than in female. 4. The mean of maximum laterotrusion in frontal trajectory was larger to the left than to the right. Also the proportion of left deviation at maximum opening position was larger than that of other cases. 5. The mean of maximum opening and closing velocity was higher in male than in female and the mean of closing velocity was higher than that of opening velocity. Also the amount of separation from the centric occlusion was higher in maximum closing velocity than in maximum opening velocity. 6. Clinical rest position was $1.70{\pm}0.99mm$ inferior, $0.74{\pm}0.57mm$ anterior, $0.99{\pm}0.51mm$ right from centric occlusion and the A/V ratio was 1:2.7.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.6
• /
• pp.462-467
• /
• 2013

In this paper, we analyzed the effects of doctoring process on the patterns of Ag ink in gravure off-set printing. The parameters of doctoring process were the angle and the pressure, which was represented by the depth of blade movement to the gravure roll, of doctor blade to the surface of gravure roll, and the angle of patterns engraved on the gravure roll to the doctor blade moving direction. The proper parameters were extracted for the fine patterns and they were 15 mm for the pressure, $60^{\circ}$ for the blade angle. And the angle of patterns with respect to the blade movement should be less than $40^{\circ}$ for the best results. The gravure off-set printing with the above parameters was carried out to print gate electrodes and scan bus lines of OTFT-backplane for e-paper. The line width of $50{\mu}m$ was successfully obtained. The thickness of electrodes was $2.5{\mu}m$ and the surface roughness was $0.65{\mu}m$ and the sheet resistance was $15.8{\Omega}/{\Box}$.

• Sleep Medicine and Psychophysiology
• /
• v.4 no.2
• /
• pp.191-200
• /
• 1997

Objectives : Periodic limb movements during sleep (PLMS) may cause arousals that may lead to non-restorative sleep. PLMS is characterized by long sleep latency, sleep fragmentation, frequent stage shifts, and rarity of stages 3/4 NREM sleep on polysomnography. However, controversies have existed and it still remains to be elaborated whether PLMS actually causes insomnia, since normal persons happen to have PLMS. Clinically, it would be crucial to know factors which might disturb sleep in PLMS. We became interested in Coleman's theory(1980) that invariant periodic movements disturb patients' sleep less. Though, Coleman's study seems to have been confounded by including PLMS patients with various co-morbid sleep disorders. Therefore, we attempted to study in patients only with PLMS the effects of movement patterns on sleep architecture. Methods : In 27 patients diagnosed as having PLMS only with clinical interview and nocturnal polysomnography, we studied the relationship between the movement patterns such as mean duration and variability of periodic limb movement's interval and the sleep architecture variables. Results : The shorter and the more regular the limb movement intervals were, the fewer arousals followed. The movement intervals of the older patients were shorter and more regular than the younger patients. The probability of the accompanying arousal with each limb movement increased as the duration and variance of the movement intervals increased. It decreased as the age and the frequency of limb movements increased. Among these factors the most significant one was the mean duration of the movement intervals. In other words, the shorter the movement intervals were, the less disturbed sleep was. Conclusion : PLMS frequency increases with aging but the probability of the accompanying arousal with each movement decreases with aging. Sleep-disturbing effects of PLMS depends more on the duration and variability of movement intervals than the PLMS frequency.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.89-89
• /
• 2022

Soybean (Glycine max (L.) Merr.) is a representative food resource. To preserve the integrity of soybean, it is necessary to protect soybean yield and seed quality from threats of various pests and diseases. Riptortus pedestris is a well-known insect pest that causes the greatest loss of soybean yield in South Korea. This pest not only directly reduces yields but also causes disorders and diseases in plant growth. Unfortunately, no resistant soybean resources have been reported. Therefore, it is necessary to identify the distribution and movement of Riptortus pedestris at an early stage to reduce the damage caused by insect pests. Conventionally, the human eye has performed the diagnosis of agronomic traits related to pest outbreaks. However, due to human vision's subjectivity and impermanence, it is time-consuming, requires the assistance of specialists, and is labor-intensive. Therefore, the responses and behavior patterns of Riptortus pedestris to the scent of mixture R were visualized with a 3D model through the perspective of artificial intelligence. The movement patterns of Riptortus pedestris was analyzed by using time-series image data. In addition, classification was performed through visual analysis based on a deep learning model. In the object tracking, implemented using the YOLO series model, the path of the movement of pests shows a negative reaction to a mixture Rina video scene. As a result of 3D modeling using the x, y, and z-axis of the tracked objects, 80% of the subjects showed behavioral patterns consistent with the treatment of mixture R. In addition, these studies are being conducted in the soybean field and it will be possible to preserve the yield of soybeans through the application of a pest control platform to the early stage of soybeans.

• Journal of Information Processing Systems
• /
• v.6 no.4
• /
• pp.521-536
• /
• 2010

Spatio-temporal patterns extracted from historical trajectories of moving objects reveal important knowledge about movement behavior for high quality LBS services. Existing approaches transform trajectories into sequences of location symbols and derive frequent subsequences by applying conventional sequential pattern mining algorithms. However, spatio-temporal correlations may be lost due to the inappropriate approximations of spatial and temporal properties. In this paper, we address the problem of mining spatio-temporal patterns from trajectory data. The inefficient description of temporal information decreases the mining efficiency and the interpretability of the patterns. We provide a formal statement of efficient representation of spatio-temporal movements and propose a new approach to discover spatio-temporal patterns in trajectory data. The proposed method first finds meaningful spatio-temporal regions and extracts frequent spatio-temporal patterns based on a prefix-projection approach from the sequences of these regions. We experimentally analyze that the proposed method improves mining performance and derives more intuitive patterns.

• The Journal of Korean Academy of Prosthodontics
• /
• v.17 no.1
• /
• pp.7-21
• /
• 1979

This investigation was to analyse normal protrusive and lateral condylar pantographic records written on the sagittal plane and to study components of Fisher's angle and their interrelations. The purpose of this study was limited to (1) discussing the significance of sagittal pantographic record in diagnosis of occlusal disease and(2) basing for reasoning validity of measuring Fisher's angle which has been reported so far. As a result followings were concluded. 1. In each protrusive and lateral condylar movement path, five complicate factors such as initial straightness, distributed simple sigmoid type, simple curvature, initial tiny protruding convexity and tiny repeated sigmoid patterns were noted. Generally each condylar movement path was composed of two to three of these factors. 2. The distribution of positional interrelations of protrusive and lateral condylar paths could be divided into five categories; (a) protrusive-upper, (b) completely coinciding, (c) partially initial coinciding, (d) partially inverted crossing, and (e) completely inverting. Among these, protrusive path-upper positioned condyles were prevailed (79.2%). 3. The distribution of interrelations of protrusive and lateral condylar paths could be devided into five categories according to their distances in the course of movement. Among these, opening (95.8%) and paralleling (66.7%) were prevailing. 4. The involved number of characteristic heterogenous patterns of five categories in protrusive and lateral condylar movement recording relations at one simultaneous recordings was limited to three. However, in case of homogeneous patterns were repeated, usually three to four were included. 5. The maximum distance between protrusive and lateral condylar paths was 1.45mm at the location of 4mm advanced position from centric relation point and 3.90mm at the location of protrusive movement terminal. 6. It seemed to be that ,pantographic records should be consulted other clinical symptoms in order to make certain occlusion diagnosis. 7. At the present moment of investigation, expressing Fisher's angle as a degree revealed a lack due to inherent complexity of protrusive and lateral condylar movement paths. 8. The typical pattern of protrusive and lateral condylar paths written on a pantographic sagittal plate might be described as follows; (a) protrusive condylar path should be positioned upwardly, (b) both mainly be simple curvature, (c) interrelations mainly be opening or paralleling. 9. The mean amounts of separation between protrusive and lateral condylar movement path were $0.75{\pm}0.46$ at 4mm advanced location from centric relation and $1.74{\pm}0.64mm$ at the location of protrusive path terminal.