• Archives of Reconstructive Microsurgery
• /
• 제13권1호
• /
• pp.29-35
• /
• 2004

Materials and Methods: Total number of peroneal perforator flap is 14 cases, which 10 cases were man, 4 cases were woman. The range of age was 12 years old minimally and until 63 years old. The trauma was most common etiology, which was like traffic accidents, 9 cases. We confirmed tibialis anterior artery patency by doppler flow meter, angiography as preoperative evaluation. Results: 1. The success rate was 91%, that in 14 cases, 13 cases were succeded. 2. To obtain successful result of peroneal flap, one must have the anatomic concept for vascular pattern, 8 cases were between peroneus muscle and soleus muscle branch type but, 3 cases were through soleus muscle branch type, so we treated these cases by using soleus muscle including peroneal perforating branch not to injury perforating artery directly. 3. The pedicle size was between minimally $2{\times}2.5cm$ and maximally $6.5{\times}8.5cm$ so we could treat large recipient site. 4. The pedicle length was between minimally 3.2 cm and maximally 11.5cm, average 7.5 cm. 5. The diameter of perforating artery was estimated by inspection, that was about 0.2-0.5 cm Conclusion: The peroneal perforating artery flap has merits that we can approach in avascular zone and has wide movable range from foot to distal femur and little donor site mobidity and can harvest osteocutaneous flap. The weak point was the irregular anatomy of nutrient artery and not to contain sensory nerve.

• 동의생리병리학회지
• /
• 제18권4호
• /
• pp.965-975
• /
• 2004

The writer reviewed on Chojop and came to conclusions as follows. Symptoms of Chojop is appeared digestive ailment such as belching, nausea, regurgitation of acid, stomachache etc., if being serious, felt oppressed with palpitating in chest and uneasiness at times. In Dangaesimbub written by Chujinhyung, the causes of Chojop were mainly regarded as phlegmatic fire(痰火) and suggested the way of treatment. The causes of Chojop are movable fire with phlegm, insufficiency of blood caused by thinking to excess, and Shinyanghohan(腎陽虛汗) that is piled cold phlegm by voidance and coldness of Renal Yang, but the main cause is brought to a conclusion as phlegmatic fire. The phlegmatic fire is come from being in discord with the spleen and the stomach, or from in harmony between vigor and blood according to essence and vital energy which are disturbed by combined feelings. That is caused by disharmony between inner and outer conditions according to individuals. The distinctive features in shapes of Chojop are revealed to shapes such as manlike woman, womanlike man, wearing darkish or reddish color between two eyebrows, being almond eyed, strong eyebrows, being sunk the upper part of the nose bridge, lots of facial blots, Dam-body, Ki type, Shin type, Birds group, and Yangmyung type. The doctors can prescribe Whadamchungwhatang to Yangmyung type, Yanghyulsamul-tang for patients with strong eyebrows so flourishing blood and vigor, Hyangsapyungwuisan for patients belong to Birds group, Soshikchungul-tang for Ki type, and Palmiwhan for man belonged to Bangkwang-body with voidance and coldness of Renal Yang chiefly.

• Journal of Biosystems Engineering
• /
• 제31권3호
• /
• pp.161-167
• /
• 2006

The purpose of this study is to find the optimal conditions of PCM slurry manufacturing equipment for saving the marketing cost and keeping the original quality of products. In addition, the characteristics of the movable container for shipping or distributing products is analysed. The major results are as follows. 1. PCM thermal storage system is designed with the conditions of temperature($-5{\sim}10^{\circ}C$), cold chain time(30 minutes), and one time usage(50 liter). This system includes tank, freezer, circulating pump, cycle type heat exchanger, swelling tank, equipment of supplying PCM supplying unit includes cold tank, cycle type heat exchanger, suction unit and control equipments, etc. 2. After ability test of PCM thermal storage system, it shows that the required freezing time of PCM thermal storage system is less than one of the previous system. The reason is that churn (top and bottom) and compulsion circulation are occurred simultaneously and unit cooler type method is better than chiller type method. 3. By the experiment of transportation latent heat container, it is decided that the best container is $K_1$ with latent heat temperature($0{\sim}5^{\circ}C$) and density(0.15%). However, for $K_l\;and\;K_2$, it is necessary more studies on latent heat thermal conditions and conditions of making method.

• 한국주거학회논문집
• /
• 제18권5호
• /
• pp.85-91
• /
• 2007

This is a case study for improving the sound environmental quality of cafeteria in university campus. The purpose of the study is to find out the present condition of physical level, type, and cause of indoor noise of cafeteria in university campus by comparison with a restaurant near campus. Research methods were field survey and questionnaire survey. Field survey was consisted of measurement on equivalent and instant noise level and observation on noise type. Respondents of questionnaire survey were 60 students using subject cafeteria or restaurant. Surveys were carried out in the 8th and in the 14th of December 2005. The results are as follows. 1) Indoor noise levels of the cafeteria were measured as $67.2{\sim}76.6$ (average 73.3) dB(A)Leq5min and $60.3{\sim}90.5$ (average 71.2) dB (A), exceeded the indoor noise recommended value of ASHRAE (American Society of Heating, Refrigerating and Air Conditioning Engineers). But noise levels of the restaurant were $61.6{\sim}70.4$ (average 66.9) dB(A)Leq5min and $59.8{\sim}70.6$ (average 64.9) dB(A). 2) The users's responses on major noise type in the cafeteria were 'noise by handling equipment and tableware', 'noise by moving chairs', and 'talcing noise', but 'taking noise' and 'background music' in the restaurant. 3) It was found that indoor noise level of the cafeteria was caused by sound reflection of finishing materials, noise diffusion by open type kitchen, and dragging noise of movable furniture.

• 한국수자원학회논문집
• /
• 제40권2호
• /
• pp.135-146
• /
• 2007

한강 본류의 잠실 및 신곡 수중보가 흐름에 미치는 영향을 적절히 모의할 수 있도록 FLDWAV 모형을 수정, 개선하였다. 고정보 측에서 발생하는 월류형 흐름에 대해서는 월류 유량 관계식을, 가동보 측에서의 하도형 흐름에 대해서는 Manning 형의 유량관계식을 각각 적용함으로써 복합적인 형태의 수중보 흐름을 모의하도록 하였다. 월류 유량식으로는 수중 위어형 및 자유 월류형 흐름에 대한 식들이 적용 가능하며, 가동보 개방시 또는 미개방시의 흐름을 모두 모의할 수 있다. 모형의 적용성을 검증하기 위하여 수중보 지점에서의 다양한 조건에 대하여 계산을 수행한 결과, 각 경우에 대한 배수효과가 잘 모의되었다. $M_2$ 및 $S_2$, 2개 분조에 대한 합성 조위를 생성, 대조 및 소조시의 조위 조건을 하류단 경계조건으로 하여 과거 홍수사상에 대한 모의계산을 수행하였다. 홍수규모가 작을수록 대조 및 소조 시 계산유량의 차이가 커지고, 감조구간도 상류쪽으로 확장되는 경향이 명확히 나타났다. 평수시 흐름에 대한 모의기능을 검사한 결과, 수중보의 존재로 인한 수위의 불연속성이 잘 모의되었다.

• 한국주거학회논문집
• /
• 제21권1호
• /
• pp.113-121
• /
• 2010

This research is aimed at the development of Long Life Housing, which can realize sustainable construction and environment. It also promotes practical use of Long Life Housing with evaluation of the field application through Mockup House. This research is one of the important tools to realize Long Life Housing and deducts various traditional design's element technology to cope with demands of change of life cycle and style of residents. this study set three elements of plans for modernization in the traditional design factors that opening, wall and bottom as space composition elements of interior facts. first, Jang-ji wall and storage wall system separated from elements of wall that applied modernize elements of the wall. second, element of opening was restructure swing-lift-up opening system into modernize. third, maru and toet-maru system separated from elements of bottom that was applied modernize elements of the bottom. each elements segregation with four types as basic type, separate type, movable type and mixed type. This research make a proposal of plans for modernization in the traditional design factors, aimed at Long Life Housing through these four types blend. In addition, it points to promote realization of the sustainable 'Korea-style Long Life Housing' through modernization.

• 한국안전학회지
• /
• 제19권4호
• /
• pp.42-47
• /
• 2004

In this paper, we analyzed on the characteristics of the stranded wire disconnected by repeated stress. The stranded wires that were used in the experiment are PVC insulated flexible cords(VCTFK: Vinyl Insulated Vinyl Cabtyre Cord Flat-type) of $0.75mm^2,\;1.25mm^2,\;and\;2.0mm^2$. They are used to connect the load in low voltage. The stranded wires disconnected by repeated stress were magnified with optical microscope. Using X-ray, the disconnected wire were photo-graphed. we compared mechanical characteristics of the stranded wire between disconnected tendency and allowable current. On the mechanical strength of vinyl cap tire ellipse type cords under bending stress, VCTFK of $1.25mm^2$ was the strongest of them. When it was bent $826.3\pm7$ times, it appeared the disconnected tendency that element wires of VCTFK of $1.25mm^2$ are more about 1.67 times than element wires of VCTFK of $0.75mm^2$. In mechanical strength, VCTFK of $1.25mm^2$ is higher about 1.7 times than VCTFK of $0.75mm^2$. Therefore, we found out that mechanical strength was higher, when the wire had a lot of element wires. In comparison with bending stress, VCTFK of $1.25mm^2$ is the strongest among samples, and it is the most useful in wires of movable type.

• 센서학회지
• /
• 제5권3호
• /
• pp.1-8
• /
• 1996

LVDT는 독립적으로 움직일 수 있는 코어의 변위에 비례하여 전기적 출력을 나타내는 전기기계적 트랜스듀서이다. 기존의 일반적 LVDT는 구조적으로 측정범위에 대해 크기의 비가 작은 단점을 가지고 있다. 이러한 단점을 개선하기 위하여, 새로운 형태의 LVDT를 제안하였고 동일한 치수와 코어를 가진 두가지 형태의 LVDT에 대하여 FEM 해석을 통하여 시뮬레이션하였다. 시뮬레이션 한 결과를 토대로 이들을 제작하여 그 특성을 비교하였으며 시험결과 측정범위${\pm}5\;mm$ 에서 일반 LVDT는 ${\pm}3\;%$의 선형도를 나타내었으며, 본 연구에서 제안한 LVDT는 ${\pm}0.5\;%$의 선형특성을 나타내었다. 따라서 이론적 결과와 실험적 결과를 통하여 기존의 LVDT보다 제안된 LVDT의 특성이 우수함을 확인할 수 있었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.690-696
• /
• 2011

A number of conventional railway bridge is more than 2600. Non-ballast plate girder bridge is about 700 and this is 27% of all bridge numbers. Non-ballast plate girder has advantages that self load is more lighter than moving load and construction cost is more inexpensive than concrete bridge. But non-ballast plate girder has disadvantages that vibration and noise is bigger than concrete bridge. This study had analyzed behavior of non-ballast plate girder according to the arrangement of supports and driving conditions to review the proper arrangement of support. Measurements were performed in single line and disel locomotive of 7400type were used as test vehicle. The vehicle's driving conditions are as follows; Change of driving direction, Constant speed driving, Deceleration driving, Acceleration driving. Main measurement contents were horizontal displacement and vertical vibration acceleration in girder of vicinity support. Results of measurement are as follows; In case that a vehicle drives from fixed support to movable support, vertical vibration acceleration of the girder was smaller than opposition case.

• 대한기계학회논문집A
• /
• 제30권11호
• /
• pp.1369-1375
• /
• 2006

In this work, mechanical characteristics of stainless steel diaphragm have been studied as a potential robust substrate and a diaphragm material for micromachined devices. Lamination process techniques combined with traditional micromachining processes have been adopted as suitable fabrication technologies. To illustrate these principles, capacitive pressure sensors based on a stainless steel diaphragm have been designed, fabricated and characterized. The fabrication process for stainless steel micromachined devices keeps the membrane and substrate being at the environment of 8.65MPa pressure and $175^{\circ}C$ for a half hour and then subsequently cooled to $25^{\circ}C$. Each sensor uses a stainless steel substrate, a laminated stainless steel film as a suspended movable plate and a fixed, surface micromachined back electrode of electroplated nickel. The finite element method is adopted to investigate residual stresses formed in the process. Besides, out-of-plane deflections are calculated under pressures on the diaphragm. The sensitivity of the device fabricated using these technologies is 9.03 ppm $kPa^{-1}$ with a net capacitance change of 0.14 pF over a range 0$\sim$180 kPa.