• International Journal of Industrial Entomology and Biomaterials
• /
• 제4권1호
• /
• pp.19-22
• /
• 2002

Rotary mountages are the best mountages among all the mountages that are used in sericultural areas. But to use this mountage more space, separate mounting hall & requires more labour to pickup the matured worms. to over come these problems, self mounting method is adopted to save the time Er labour, But the mounting rate is generally less. To accelerate the mounting rate different repellents viz; saw dust, phytoecdysone, 1% cresol with paddy husk, lime, kaolin, gormalin chaff were used in the present study. The results indicated that highest number of larvae climbed the mountage in 1% cresol with paddy husk, followed by phytoecdysone and lime. It is observed that the use of repellents at wandering stage accilerates mounting rate and did not affect the quality of the cocoons and reeling characters.

• 소음진동
• /
• 제6권4호
• /
• pp.503-511
• /
• 1996

There is a tendency of using the resilient mounting system to control the structure born noise transimitted from a engine of which weight is comparatively light and of which speed is comparatively high. According to recent reports, the resilient mounting system is applied to control the vibration of a engine running up to 300 - 400 R.P.M.. Furthermore, the resilient system is also used to the ships such as marine exploring ships, fishing boats, and military vessels. It is not desirous to apply the results for the resilient mounting systems of automobile engines to the controls of the vibrations of marine engines. Marine engines are worked under the idle speed in port and are operated up to the maximum contineous revolution at sea(running up condition). And marine engines are usually worked in inevitable conditions such as a misfire and a cut-off cylinder operating condition. Concerning the above running conditions, a resilient mounting system should be designed in the case of marine engines. In this paper, we studied the effect of engine's misfire on the resilient mounting systems. And the influences of design parameters, such as dynamic characteristics and fitting angles of resilient rubber mountings, were also investigated respectively on the single and double resilient mounting systems.

• Journal of Advanced Marine Engineering and Technology
• /
• 제18권5호
• /
• pp.56-67
• /
• 1994

The installation methods of diesel engines in ships would be largely classified into two groups : one is the direct mounting system fixing engine directly into double bottom of the hull, and the other is the resilient mounting system having vibration absorbers between engine and ship body such as rubber plate to prevent shocks or vibration transmission. The direct mounting system is generally used for large-sized low speed diesel engines, because the resilient mounting system has difficulties in reducing the natural frequency of engine itself under normal speed. On the contrary, the resilient mounting system is often used for medium or high speed engines for marine propulsion and generator that have light weight and high revolution speed. Recently, it is even applied to engines having relatively low speed(300-400rpm) for fishing boats. Although many researches for the resilient mounting system have been carried out, many problems in applying these results directly to marine vessels because most of these have been used for automobiles. Up to now we have had to depend on the professional foreign company in design and the supply of parts for the resilient mounting system of marinediesel engines utterly. In preseut study, the exciting forces of engines effecting to resilient mounting were examined, and patterns of vibration and evaluation procedure for force transmission from resilient mounting to the body of hull were established. Also, these results were applied to the analysis of free and forced vibration for the rubber-type resilient mounting systems of marine diesel engines. Besides, after changing the various design parameters, such as locations, angles, dynamic characteristics and the number of resilient mountings, the influences on resilient mounting system were also examined.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.1039-1042
• /
• 2002

SMD(Surface Mounting Device) which mounts electronic components as IC-Chips on PCB automatically, produces a large dynamic force and vibration. The unwanted vibrations in SMD degrade the performance of the precision device and it is the major obstacle to limit its speed for mounting. This study investigated the vibration analysis of a typical SMD to predict the natural frequencies and mode shapes. To validate the finite element analysis of SMD, the FE result was compared with that of ODS measurements. It was shown that the predicted results were well correlated with the experimental modal parameters.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1996년도 춘계학술대회논문집; 부산수산대학교, 10 May 1996
• /
• pp.188-193
• /
• 1996

The purpose of resilient mounting for marine engine is to prevent noise and ship damages caused by engine vibration. Although many researches for the resilient mounting system have been carried out, these results have limit to apply on the marine engine systems. Because marine engine generally have low speed operating range and have to consider misfiring condition. In this paper, we studied the effect of engine's misfiring on the resilient mounting systems. And the influences of design parameters, such as dynamic characteristics and location angles of resilient rubber mountings, were also examined on the single and double resilient mounting systems.

• 한국측량학회지
• /
• 제30권1호
• /
• pp.31-38
• /
• 2012

UAV기반 멀티센서 시스템을 통해 취득된 영상의 지오레퍼런싱 정확도는 사용된 GPS/INS 시스템의 성능뿐만 아니라 카메라와 GPS/INS 시스템간의 상호관계를 나타내는 탑재변수의 정확도에 의해 영향을 받는다. 따라서 멀티센서 시스템 개발에 있어서 탑재변수의 정확한 추정은 필수적이다. 현재 우리는 재난/재해와 같은 긴급 상황에 대한 빠른 대응을 위해 실시간으로 대상지역을 감시할 수 있는 저고도 UAV기반의 실시간 공중자료획득 시스템을 개발하고 있다. 본 연구는 현재 개발 중인 시스템의 탑재변수 추정을 위한 시스템 캘리브레이션 방법론을 제안한다. 또한 실제 시스템의 제원을 이용한 시뮬레이션 데이터를 이용하여 정확하고 효율적인 캘리브레이션을 위한 효과적인 비행경로 및 지상기준점의 필요 개수를 도출하였다. 실험 결과, 총 6개의 스트립으로 구성된 비행경로를 따라 획득된 데이터와 5점 이상의 지상기준점 정보를 이용하면 제안된 방법론을 통해 정확한 탑재변수의 추정이 가능함을 확인할 수 있었다. 향후에는 제안된 방법론을 이용하여 개발된 시스템의 탑재변수를 추정하고 이를 이용하여 획득된 센서 데이터의 지오레퍼런싱 정확도 평가를 수행할 예정이다.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제7권1호
• /
• pp.79-82
• /
• 2003

To study the effect of mounting fully ripe and unripe silkworms at different maturation percentage, the ripe and unripe silkworms were mounted separately and observed the cocoon and reeling characters. The significant difference in the cocoon and reeling parameters was observed between all ripe and unripe batches except for summer season. The silkworms collecting together and mounting at a time can be recommended only in summer season and at certain level during rainy season.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.139.2-139
• /
• 2001

This paper presents identification and control of a surface mounting system. The mount head of the system is modeled to analyze its dynamic characteristics, which is critical to the placement performance of the mounter. Based on this model, an identification work is carried out to estimate the modeled parameters by using genetic algorithm (GA), which plays a role of minimizing an error between the actual response and the model response. Having obtained the identified parameters, we design a disturbance observer control to compensate the friction. The disturbance observer can estimate the friction force and the uncertainty of the system. From the experimental results, it is found that the proposed disturbance observer plus PID controller show a better performance than PID controller alone. In order to accomplish a stable contact content control for fast mounting a ...

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.389-394
• /
• 2003

In this paper, a shape optimization technique is applied to design of an air-conditioner mounting bracket. The mounting bracket is a structural component of an engine, on which bolts attach an air-conditioner compressor. The air-conditioner mounting bracket has a large portion of weight among the engine components. To reduce weight of the bracket, the shape is optimized using a finite element software. The compressor assembly, composed of a compressor and a bracket is modeled using finite elements. An objective function for the shape optimization of the bracket is the weight of the bracket. Two design constraints on the bracket are the first resonant frequency of the compressor assembly and the fatigue life of the bracket. The design variables are the shape of the bracket including thickness profiles of the front and back surfaces of the bracket, radius of outer bolt-holes, and side edge profiles. The coordinates of the FE nodes control the shape parameters. Optimal shapes of the bracket are obtained by using SOL200 of MSC/NASTRAN.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.121-121
• /
• 2000

This paper presents a design of macro-micro system for high-speed mounting of micro-chips. A macro motion device is driven by DC servomotor and ball screw mechanism. To obtain fast response, a micro motion device utilizes a precision elector magnetic actuator In order to reduce peak impact force, We evaluate the design parameters that have an effect on it. And a characteristic of response is simulated using PID controller in velocity and force control.