• Journal of the Korea Convergence Society
• /
• v.10 no.4
• /
• pp.39-43
• /
• 2019

The gantry of surface mount equipment (SMD) is responsible for transferring parts from the feeder to the PCB. At this time, the moving time of the gantry affects the yield. Therefore, in this paper, we propose the fastest path from the suction to the mounting to reduce the gantry travel time. This path is a case where the velocity in front of the camera is 2m/sec due to the nature of the gantry. Therefore, the trajectory graph of this case was created through simulation and the travel time was calculated. As a result, we can see that the moving time of the moving-motion method proposed in this paper is 20% shorter than the current stop-motion method.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.10
• /
• pp.44-51
• /
• 2020

We studied the heating characteristics of a whirling spindle. This spindle is an important component of a whirling machine for turning a ball screw shaft. In the manufacturing process for a conventional ball screw shaft, a single tool is used to form a spiral in a lathe machine tool. Thereafter, a high-frequency heat treatment process is performed. Recently, a whirling-type cutting method has emerged. This method can perform hard turning in the rotating direction of the spiral portion of the ball screw shaft by rotating and mounting multiple tools. The whirling method can be applied to the heat-treated material. In this study, an experimental apparatus was constructed to analyze the whirling spindle. The experiment proceeded in four steps. The rotating speed of the whirling spindle was set to ISO random and sequential rising conditions. Cooling and non-cooling modes in the cooling jacket were tested. As a result of the above experiment, the heating characteristics of the whirling spindle were derived.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1936-1938
• /
• 2004

In this paper, we discussed measurement method of PD (Partial Discharge) of 22.9[kV] cable. Cable rail track laying portable detector that can detect partial discharge of cable connection ashes by on-line done spot way to detect Lemke equipment and high broadcasting CT sensor that use antenna sensor using ICM mounting was explained. Because measurement corona signal is very big, analysis of partial discharge is difficult state, we used connector. It could be attenuated by 2 times. We found out that corona signal which generated on B phase is flowed on A phase and C phase. It could measure that partial discharge of A phase happens actually. We could confirm that partial discharge of about 250 ${\sim}$ 300 [pC] on A phase is dangerous.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1092-1096
• /
• 2011

The "standard regulation" of the vehicles from "urban transit law" are being adopted to electric multiple unit in domestic. In the standard regulation, there are two types for EMU. One is heavy EMU for Seoul. The other is large EMU for Pusan, Daegu, Gwangju, Daejeon, Incheon. Korea Railroad Research Institute, with the assistance of the Ministry of Land, Transport and Maritime Affairs, "advanced EMU development project" are progressed, and 6th year started at September, one unit to six cars is completed. Now "urban transit vehicle performance tests are on the current progress. The main characteristics of AUTS(Advanced Urban Transit System) are as follows. One inverter control one motor, DDM(Dircet Drive Motor), no driving gear, plug door and steps, mounting and maintenance costs down, passenger convenience improvement. This paper describes the key features the next generation EMU, and performance test results, and the commercial success method of national R&D business.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.48-51
• /
• 1997

This paper presents the algorithm of FIC inspection in chip mounter. When device is mounted on the PCB, it is impossible to get zero defects since there are many problems which can not be predicted. Of these problems, devices with bent corner leads due to mis-handling and which are not placed at a given point measured along the axis are principal problem in SMT(Surface Mounting Technology). In this paper, we proposed a new algorithm based on the Radon transform which uses a projection to inspect the FIC(Flat Integrated Circuit) device and compared this method with other algorithms. We measured the position error and applied this algorithm to our image processing board which is characterized by line scan camera. We compared speed and accuracy in our board.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.149-152
• /
• 2004

Speed and torque control of PMSM(Permanent Magnet Synchronous Motor) are usually achieved by using position and speed sensors which require additional mounting space, reduce the reliability in harsh environments and increase the cost of a motor. Therefore, many studies have been performed for the elimination of speed and position sensors. In this paper, a novel speed sensorless control of a permanent magnet synchronous motor based on SVMR(Support Vector Machine Regression) is presented. The SVM regression method is an algorithm that estimates an unknown mapping between a system's input and outputs, from the available data or training data. Two well-known different voltage model is necessary to estimate the speed of a PMSM. The validity and the usefulness of proposed algorithm are thoroughly verified through numerical simulation.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.3 s.180
• /
• pp.132-138
• /
• 2006

With a great requirement of innovation caused by severe competition current companies are encouraged to improve bottleneck areas in production procedure. Specially a chassis line in which assembly processes are mainly carried out manually has the large potential to be automated. The putting of spare tire in trunk in chassis line is still dominated by free dropping method. Through that, parts in trunk such as luggage room lamp, jack and so on were damaged and the complaint of assembler in the next process was occurred due to physical strength. To eliminate these, tile robot system was in this paper developed to place spare tire on the mounting hole in trunk. The movement of robot was synchronized with the velocity of chassis hanger. With this automated system the productivity of the chassis line was increased from the benefits such as simplification of the system using only robot without the mechanically synchronized transport, inserting spare tire into the right position with robot, reduction of damaged parts and production of various type of car.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.10a
• /
• pp.43-46
• /
• 2009

This paper describes a development of the temporary transformer system and method. The failure causes are genrally divided into problems in manufacturing, mounting and operating. To replace the bum-out pole transformers developed various facilities, power cable clamp, the control panel of self-sensing device and voltage connection box etc. That is more effective to establish the emergency transmission systems for the non interruption replacement of distribution transformers.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.6 s.99
• /
• pp.674-679
• /
• 2005

Statistical Energy Analysis(SEA) has been considered as a Possible method for predicting responses of complex structures, especially at higher frequencies. In this paper, an SEA model of a vehicle was built using 138 energy storing subsystems connected together using 1019 Junctions. SEAM software program was used to build and calculate the model. To demonstrate the accuracy of the SEA model, predicted response levels were compared with measured levels. The source Input levels were measured at the engine mounting parts. There is good agreement between the estimated and the experimental results. This paper also identifies some dominant energy flow paths from sources. It is finally presented that the SEA model can optimize the design parameters of vehicles using model parameters and energy flow paths.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.5 s.176
• /
• pp.1238-1245
• /
• 2000

One of the main causes of severe wear or crack initiation in wheel and rail is the contact stress due to wheel-rail contact. First, we obtain contact stress due to the rail mounting slope using the finite element method. Second, the shape design based on more reasonable contact stress analysis rather th~n a general Hertzian contact theory is investigated in order to reduce the contact stress. The optimum -design is performed using the simple 2-D finite element model and its results are verified by 311) finite element analysis.