• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.201-206
• /
• 2003

Plastic injection mould have two kinds of trouble, one is in mould another in injection parts. Most of defects of the former take the cause in a design like in structure and working, the later weld line, transforming, sink mark, burning, flow mark, scratching, shading, black hole and so on. Most of problems of the later is difficult for making a clear definitely the reason of defects because of complexible. The purpose of this paper is to improve the quality of plastic injection mould and parts with inquiring the counter plan and rouble of the part of Flat TV Front Cover by flow control method and gas- assisted injection moulding. For minimizing defects from injection moulding parts, this paper was investigated with using computer aided injection mold filling simulations. Based on these numerical results, I established guidelines mould design and injection processing condition. As a results I got the improve of quality, minimizing surface defects moulded parts and troubles in mould.

• 소성∙가공
• /
• 제12권8호
• /
• pp.738-743
• /
• 2003

The major problems of a plastic injection mould can be devided into two kinds, one is in mould another in injected parts. Most of defects of the former comes from mould design, such as, structure and working. The latter are weld line, warpage, sink mark, burning, flow mark, scratching, shading, black hole and so on. Most of problems in injection molding are difficult to find the reason because of complexity. The purpose of this paper is to improve the quality of plastic injection mould and parts with inquiring the counter plan and analizing troubles of the part of Flat TV Front Cover by flow control method and gas-assisted injection moulding. For minimizing defects of the injection moulded parts, computer aided simulation method for injection mould filling was used. Based on these numerical results, the guidelines of mould design and injection processing condition were established. As a result, the improvement of quality, such as minimizing surface defects of injection moulding parts and troubles in mould was achieved.

• 항공우주시스템공학회지
• /
• 제2권2호
• /
• pp.14-19
• /
• 2008

This paper presents the procedure and the results of the preliminary design of the fuel tank as a part of developing the helicopter. For the requirements of operational capability, MIL-DTL-27422D and Defence Standard 15-2/Issue 1 are considered to be applied in developing a helicopter fuel tank. The procedure of the fuel tank development is set up including interface plate design, tank design, former design, tank material lay-up, and tank installation assessment. The outer moulded line and fittings of fuel tank have being designed, and several test will be performed to get the qualification.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2002년도 추계공동학술대회논문집
• /
• pp.101-105
• /
• 2002

F.R.P는 수지에 유리섬유를 적층하여 제작하는 방법으로 온돈 습도 등의 적층조건에 따라 기계적.물리적 특성치가 변화하며 구성성분의 함량에 따라 다양한 편차를 나타내는 특징이 있다. 강선이나 알루미늄선의 경우에는 선급의 규칙과 기타 관련규정에 적합한 규격치수의 철강재와 알루미늄을 구입하여 사용하면 되는데 반해 F.R.P는 성형을 제작하여 그 위에 유리섬유를 적층하여 건조하는 방법으로 강선 설계시의 강판의 선정 및 부재의 조합에 의한 설계방식과는 달리 재료설계와 구조설계를 동시에 행하여야 하는 특징으로 F.R.P선박의 관련 규칙은 강선에 비하여 설계자유도가 큰 반면 부재에 대한 구체적인 기준이 확정되지 못하고 잠정규정을 설정하여 사용하고 있다. 이에 본 연구에서는 선박의 길이가 12미터(M)급인 소형 F.R.P선을 기준으로 F.R.P의 재료적 특성과 강토 방향성에 따른 유리섬유의 기계적 특성을 조사하였으며 소형 F.R.P선박의 구조설계에 필요한 기초자료를 마련하였다.