• 한국음향학회지
• /
• 제38권3호
• /
• pp.340-343
• /
• 2019

본 논문은 동력차에서 견인전동기 기진 주파수와 견인전동기 강체 모드 공진 문제로 인해 발생할 수 있는 현상에 대해 소개하고, 이를 제어하는데 효과적인 설계인자를 해석적으로 검토해보았다. 회전 속도가 변하는 회전기기의 경우, 공진 문제를 해결하기 위해서는 공진주파수 대역을 상용 운전 범위 바깥으로 이동시키거나 동강성을 크게 하는 등의 방법을 통하여 공진 응답이 낮아지도록 하는 방안이 있다. 견인전동기의 운전 범위는 일반적으로 0 r/min ~ 4800 r/min으로 대차모드가 이 운전 영역대를 벗어나게 설계하는 것은 현실적으로 불가능 하다. 따라서 공진 응답에 영향을 주는 설계 인자를 찾아 이를 적절하게 조정하여야 한다. 유한요소 해석 검토 결과, 견인전동기 강체모드 공진 응답에 영향을 주는 설계인자는 트랜섬파이프 간격으로 간격이 지나치게 넓게 설계될 경우 견인전동기 기진력과 강체 모드 간 공진 시 과도한 진동이 발생될 수 있음을 파악하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 창립기념 춘계학술대회 논문집
• /
• pp.466-473
• /
• 1998

LRV(Light Rail Vehicle) is one of the most useful way for urban transit. HDPIC has designed and manufactured the LRV train set for Manila Line 1 expansion. The LRV is composed of two carbody sections which are coupled by a articulated bogie. The articulated bogie and two motorized bogies have slewing rings in order to improve the curving performance and ride quality. Carbody structures are mainly made of low-carbon stainless steel (STS301L), and the carbody bolsters and draft sills are made of rolled steel for welded structures. The authority's specifications specified the design load conditions and weight limits. Design load conditions are vertical load, compressive load and diagonal jacking, and the maximum axle load is 10.7 ton. In order to meet those requirements, the stiffness and strength of carbody structure were predicted using finite element analysis during design stage. The half or full structure is modeled and analyzed with design load conditions, and critical areas are analysed in detail using sub-modeling method. The strength and strength of carbody structure was also verified by the load test. The analysis and test results show a good agreement.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 추계학술대회 논문집
• /
• pp.172-180
• /
• 1999

The major subject of this paper is to develop the concept fur a Korea high speed train system and recommend to train configuration. High speed train configurations are basically concerned traction power(train configurations with concentrated; CPT or distributed Power system: DPT) and train design(single car as compared with articulated bogies). The result of configuration, a advantages and disadvantaged were necessitated by different train configurations; -distributed underfloor power have an increased length for the seats by 15% as compared with the concentrated power trait - articulated trainsets are characterised by less of number of bogies and reduced values of mass, train resistance, noise and vibration. from the result, the optimized train concept combining high seat capacity per train length with low weight and train resistance is 400m long, single -floor train composed of two symmetrically arranged half trainsets. Therefore, at this work recommended distributed train system However, the final decision of Korea high speed train configuration was concentrated power train and articulated bogie system. The configuration of trainset was 20cars included 2 power cars, 4 motorized cars and 14 trailer cars.