• Journal of the Korean Society of Safety
• /
• v.38 no.1
• /
• pp.25-33
• /
• 2023

In this study, we determined the failure rate and fire status of electric motors widely used in domestic and industrial devices and analyzed the associated fire risks by identifying the electrical and temperature characteristics of electric motors under the normal and restrained operation modes in industrial sites and laboratories. A 2.2kW motor used for driving a conveyor during the vulcanization process in a rubber product manufacturing plant was employed as the study object and was exposed to a high- temperature environment as this motor is widely used in industrial sites. The current amplitude was 4.45-4.50 A during normal operation and 38.2-41.5 A during restrained operation due to the pinching of products and semi-finished products (i.e., 8.5 times higher than that during normal operation). The leakage current amplitude was 0.33 mA during both operation modes. The temperature of the workplace in summer was 42.38℃, indicating a poor environment for the installed motor. In the laboratory, the current and temperature of the coil inside a 3.7kW motor were measured under the restrained operation mode as performing measurements of the coil inside the motor in industrial sites is challenging. The current amplitude during normal operation was 3.5 A, whereas that during restrained operation for 30 s was 51.7-58.6 A, which is 14.8-16.7 times higher than that of normal operation. Moreover, the temperature of the motor coil increased from 22.9℃ to 101℃. Based on the experimental data, we derived the temperature increase formula according to the restrained operation time by performing a regression analysis and verified the time at which the temperature exceeded the stipulated limit for the insulation grade. The findings presented in this paper can be utilized to establish fire-prevention measures and perform safety management of motors of the same type or with a similar capacity.

• The Journal of Korean Academy of Sensory Integration
• /
• v.15 no.1
• /
• pp.10-20
• /
• 2017

Objective : The purpose of this study was to investigate the effect of proprioceptive-vestibular based sensory integrative intervention on handwriting and fine motor function in elementary school students in grades 1 to 3. Methods : In this study, eight students in an elementary school in Busan were enrolled. The intervention was conducted twice a week from May to October, 2016, and a total of 14 intervention sessions were conducted. In order to evaluate the writing ability and the fine-motor exercise ability before and after the intervention, the fine-motor movement items of the Korean alphabet writing test and the Bruininks-Oseretsky Test of Motor Proficiency (BOTMP) evaluation were used. Results : There was a statistically significant difference between the total scores of consonant writing and the Korean alphabet writing assessment after the intervention. In BOTMP-Fine motor, the response speed items showed statistically significant difference. Visual-motor control scores increased during intervention, but the statistical significance was not found. Conclusion : Sensory integration interventions might have positive effects on elementary school students' writing skills and fine motor functions.

• Proceedings of the KIEE Conference
• /
• 2008.04c
• /
• pp.175-177
• /
• 2008

The level crossing collision accident which comprises more than 90 percent of all level crossing accidents is one of the most serious safety problems. There is a critical need for providing safe strategy and is focusing on the level crossing information rather than measures at a grade crossing. This study is intended to develop technology for accident prevention and damage reduction based on accident cases analysis result and improvement direction to complement shortcomings of safety equipment of conventional level crossing and to establish safety of travelers(train, motor vehicle, person).

• The Journal of Internal Korean Medicine
• /
• v.30 no.4
• /
• pp.719-731
• /
• 2009

Objectives : Stroke is the most common disabling neurological disease of adult life. The treatment and rehabilitation of stroke patients is an important and challenging area in the field of medicine. In Korea, a lot of stroke patients are treated using oriental medicine and there have been reports on their functional recovery. The aim of this study was to prove the therapeutic effect of oriental medicine on ischemic stroke. We also tried to identify characteristics of patients whose functional recovery was prominent and studied whether or not the use of fluids, anticoagulants, antiplatelets and neuroprotective agents increased the functional recovery of patients. Methods : We studied 794 patients within 2 weeks after first attack of ischemic stroke who were admitted to Kyung-Hee Oriental Medical Center from 1999 to 2000. Their maximum admission period was 60 days. Results : Motor power grade, NIHSS and MBI scores of patients improved during hospitalization significantly. Factors affecting functional recovery were admission period, motor power grade, NIHSS and MBI at admission. Age, waist-hip ratio and HDL cholesterol also affected functional recovery of patients. Whether or not fluids, anticoagulants, antiplatelets and neuroprotective agents were administered had nothing to do with functional recovery. Conclusion : Oriental medicine is effective for treatment and rehabilitation of ischemic stroke patients. When we manage stroke, we have to consider some important factors.

• Journal of Electrical Engineering and Technology
• /
• v.4 no.4
• /
• pp.515-520
• /
• 2009

According to the operating characteristics of pump applications, they should exhibit high efficiency and energy saving capabilities throughout the whole operating process. A novel efficiency optimization control strategy is presented here to meet the high efficiency demand of a variable speed Permanent Magnet Synchronous Motor (PMSM). The core of this strategy is the excellent integration of mended maximum torque to the current control algorithm, based on the losses model during the dynamic and the grade search method with changed step by fuzzy logic during the steady. The performance experiments for the control system of a variable speed high efficiency PMSM have been completed. The test results verified that the system can reliably operate with a different control strategy during dynamic and steady operation, and the system exhibits better performance when using the efficiency-optimization control.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.715-718
• /
• 2002

As the modern technology of continuous casting plant is focused on improvement of slab quality, the control system of strand driven roll which has positive effect is investigated in this paper. An irregular distribution of withdrawal force gives rise to horizontal crack in high and middle grade carbon steel. Based on the basic understanding on design concept of high technology company, monitoring the withdrawal force distribution of strand driven roll and analysis of the control system was Performed at continuous casters of POSCO. The control algorithm of withdrawal force distribution for A.C motor vector control, which was derived from above study and had been applied for POSCO Kwangyang 1-4 continuous casting plant, is presented.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.9 s.252
• /
• pp.858-865
• /
• 2006

SMART Pilot is a multipurpose small capacity integral type reactor. Main coolant pump (MCP) of SMART Pilot is a canned-motor-type axial pump to circulate the primary coolant between nuclear fuel and steam generator in the primary system. The reactor is designed to operate under condition of $310^{\circ}C$ and 14.7MPa. Thus MCP has to be tested under same operating condition as reactor design condition to verify its performance and safety. In present wort a test apparatus to simulate real operating situations of the reactor has been designed and constructed to test MCP. And then functional tests, performance tests, and endurance tests have been carried out upon a prototype MCP. Canned motor characteristics, homologous head/torque curves, coast-down curves, NPSH curves and lift-time performance variations were obtained from the qualification test as well as hydraulic performance characteristics of MCP.

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.689-691
• /
• 1995

In this paper, a fault detection and isolation unit(FDIU) for a centrifugal pump system driven by DC-motor is proposed. The proposed scheme can be classified into the dedicated observer scheme(DOS). A fuzzy logic based inference engine is adopted for the isolation of each faults. Having the fuzzy inference engine, the proposed FDIU resolve a few important problems of the conventional DOSs with conventional two valued logic. The ouputs of the proposed FDIU are not "ith fault occurred" but the grade of memberships that indicate the consistency of observered symptoms(residuals) with each fault symptoms stored in the rule base. The ouputs can easily be transferred to the ranking of the fault possibilities and it will provide very useful informations in monitoring the process. The simulation results show that the FDIU has very good diagnostic ability even in the noisy environment.

• Journal of Korean Neurosurgical Society
• /
• v.37 no.5
• /
• pp.389-391
• /
• 2005

We report a case of T4 bursting fracture with paraparesis that recovered by posterior approach. A 47-year-old man presented with paraparesis (grade III) which had progressed rapidly after motor cycle accident. After sacrificing the T4 nerve root (right), posterior interbody fusion using cage following T4 corpectomy and T3-4, T4-5 discectomy was performed. After operation, lower extremities motor power improved and he could walk after one month. And this is the first report of posterior approach using cage by corpectomy and two level discectomy in case of upper thoracic burst fracture in Korea.

• Biomolecules & Therapeutics
• /
• v.8 no.1
• /
• pp.93-98
• /
• 2000

This study has been carried out to investigate general pharmacological action of bamboo salt (jukyom) in terms of effects on central nervous system and cardiovascular system in experimental animals. After bamboo salt, crude salt or reagent-grade NaCl were orally administered into male ICR mice with dose of 2.0 g/kg, general behavioural syndromes such as body weight and locomotor activity, spontaneous motor activity, pento-barbital-induced sleeping time, muscle incoordination, electroshock-induced convulsion, body temperature and writhing response caused by 0.6% acetic acid solution were observed. Bamboo salt had no influences in these indices for examinition of effect on central nervous system. Additionally, conscious male Sprague Dawley rats fastened overnight won ere treated with bamboo salt, crude salt or reagent-grade NaCl (2.0 g/kg, p.o.) to examine the effect of these salts cardiovascular system. Systolic, median and diastolic food pressure and heart rate were dertemined using tail cuff indirect method. Treatment with Hydralazine (50 mg/kg, p.o) as a positive control produced the decreases in systolic, median and diastolic blood treasure and an increase in heart rate. whereas no changes were observed in bamboo salt, crude salt and reagent-grade NaCl treated groups. These results strongly suggest that bamboo salt may have no effects on general pharmacology of central nervous systems and cardio-vascular systems.