• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.10
• /
• pp.694-701
• /
• 2012

The main purpose of this study is to evaluate of backwash system of hydrodynamic separator filter (HSF) with solar powered submerged pumps. It consists of a photovoltaic solar array, control electronics, battery, and two submersible pump powered by a 12 voltage DC motor. The laboratory scale study on treatable potential of micro particles using backwash HSF that was a combined with perlite filter cartridge and backwash nozzles. Since it was not easy to use actual storm water in the scaled-down hydraulic model investigations, it was necessary to reproduce ranges of particle sizes with synthetic materials. The synthesized storm runoff was made with water and addition of particles; ion exchange resin partices, silica gel particles, and commercial area manhole sediment particles. HSF was made of acryl resin with 250 mm of diameter filter chamber and overall height of 800 mm. Four case test were performed with different backwashing conditions and determined the SS removal efficiency with various surface loading rates. The operated range of surface loading rate was about 308~$1,250m^3/m^2/day$. It was found that SS removal efficiency of HSF using two submersible pumps improved by about 18% compared with HSF without backwash. Nonpoint control devices with solar water pumping systems would be useful for backwashing the filter in areas with not suppling electricity and reduce filter media exchange cost.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.16 no.4
• /
• pp.630-636
• /
• 2002

After The Yellow Emperor's Canon of Internal Medicine, The text researches of pathologic change to the liver disease concluded the next, 1, The category of liver-disease(肝病) include the Symptoms of abnormality due to vital energy and blood motion, emotion and intention, muscular and reproductive function, and legions around descending liver channel. 2. In the theory that Liver-Yang energy(肝陽氣) is always overproducing, Liver-Yin blood(肝陰血) is always lacking, pathologic characteristics for liver disease is functional change of malfunction of the use of body(體用失調), So nourishing the liver and kidney is used for the principal aspects of a disease. regulating and calm the liver is used for the secondary aspects of a disease as the treatment plan, 3. If malfunctioning of the functions of dispersion and discharge(疏泄), Iiver-energy(肝氣) is becoming degected, So overproduct and overflow of ascent and exhalation of liver-yang(肝陽) is becoming blood are ascending following energy. complete usage of Yin-blood(陰血) is responsible for some kinds of mass formed by blood stasis in the early stage of pathogenesis of liver disease syndrome of the energy system as the progession of disease extravasated blood is forming. the pathologic characteristics is appeared loss of control of the vital energy and blood(體用失調) at the liver disease. 4. Sthenia-syndrome of liver(肝實證) and liver-heat syndrome(肝熱證) is appered that overproducing and overflow of dispersion(疏泄太過) and discharge is responsible for overfunctioning of liver disease or some kinds of heat syndrome such as liver fire(肝火), Sthenia of liver-yang(肝陽上亢), the syndromes of sthenic liver heat(肝實熱) are appered. deficiency of the liver(肝虛證) and cold syndrome of liver(肝寒證) is classified pathologic characteristics of cold and heat, deficiency and excess that regression of sensory, motor, mental due to lack of dispersion and discharge(疏泄不及), or intruding of the cold miasma, are degected. 5. The liver is close relation of physiologic function and internal organ such as spleen, stomach, lung, heart, kidney, gall bladder by the meridian channels, because of property of wind Zang, rapid progession is classified by phthologic charateristics.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11b
• /
• pp.472-479
• /
• 2000

A persimmon harvesting vehicle that can be operated in hilly orchards as well as a manipulator that can be used to harvest persimmons located in remote positions in the trees were designed and developed. The vehicle could be operated with keeping balanced position in an inclined field and its working platform could be moved up and down easy to approach fruits in a remote region with the aids of a hydraulic and a electrical and electronics systems. The weight of the vehicle was 927 kg and the center of gravity was located at 427 mm to the inner side from the center of a right driving caterpillar, 607 mm to a rear axle from the center of a front axle, and 562 mm to upward from ground. The automatic level control sensor for leveling the working platform was activated within 14.5 ∼ 16.5 degrees of slope variation. The total length of the manipulator was 1.39 m and weight is 975 g. It was powered by a 12 V geared motor to detach persimmon fruits with a rotational force. The gripper was made of plastic and rubber to increase a frictional force. In a performance evaluation test, static tipping angle, dynamic tipping angle toward front side when the vehicle was moving downward, climbing angle, driving speed of the vehicle were measured or calculated. In persimmon harvesting tests 24.9% of yield was increased by hand picking with the aid of the vehicle and additional 7% of yield were increased when the manipulator was used. Therefore, 99010 of total possible yield was achievable when both of the vehicle and the manipulator were used for the manual persimmon harvesting. Increase in 22.5% of total yield was achieved with the manipulator only.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.4
• /
• pp.464-476
• /
• 2019

Objectives: This study aimed to assess the exposure levels of tollbooth workers to diesel particulate matter using black carbon (BC) and to find the correlations among variables associated with BC using the motor vehicle management act regulated by the Ministry of Land, Infrastructure and Transport. Methods: This study was performed over 14 days at a university in Seoul. BC levels were monitored using an aethalometer and were conducted around the breathing zones of the workers. There were three sampling locations: inside the tollbooth (front gate and rear gate) and an office as a control group. T-test, correlation, and multiple linear regression analysis were performed using SPSS. Results: The geometric mean (GM) of BC_30min concentrations in the exposure group was 2.44 ㎍/㎥, approximately 1.4 times higher than the control group (1.75 ㎍/㎥). The GM of BC_30min concentrations was 2.75 ㎍/㎥ during the heavy traffic time (9-10 am) and 2.30 ㎍/㎥ during non-heavy traffic times (p<0.001). The multiple linear regression analysis shows that the number of all types of vehicles and PM_2.5 concentrations in the atmosphere were factors increasing the GM of BC(ln(BC_30min)) concentrations (adjusted R²=0.42, p<0.001). The workers were constantly exposed to low concentrations (GM of BC_30min=2.44 ㎍/㎥), but they were exposed to peak concentrations instantly (BC_10sec=3545.04 ㎍/㎥). When the GM of BC_30min concentrations was momentarily represented as high, it was identified that a vehicle mainly using diesel fuel or an aging vehicle had passed. Conclusions: A ventilation system should be installed in the closed tollbooth or aging vehicles should be controlled so as not to pass tollbooths.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.11 no.3
• /
• pp.271-277
• /
• 2017

The purpose of this study was to develop a balance chair for improving pelvic correction and postural balance through postural balance training using tactile feedback by a vibration motor provided in real time according to the user's attitude. We built a body frame using mono cast(MC) Nylon, Touch thin film transistor(TFT) for user interface, a main control module using Arduino, a 9-axis acceleration sensor for user's posture determination, and a vibration module for tactile feedback. The prototype of the Balance Chair which surrounds the outside was made with cushion for sitting conformability. In order to verify the effectiveness of the postural balance training system using the built prototype, the muscle activity (% MVIC) of the left and right iliocostalis lumborum those are the main muscles of the spinal movement was measured with ten female subjects. And the balance ability before and after training was measured using Spine Balance 3D, a posture balance ability evaluation device. The muscular activities of the left and right iliocostalis lumborum showed the balance activation according to vibration feedback during exercise protocol and postural balance improved after balance exercise training using balance chair. This study could be apply to use the fundamental research for developing the various postural balance product.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.5
• /
• pp.269-274
• /
• 2013

To proportionally control the electronic valve position of the actuator, we designed and fabricated PCU, CPT, and rotary absolute optical encoder for the detection of absolute angular position in the actuator. We also designed and constructed the test system by using DAQ hardware and Labview. We designed PCU to convert 1-5 V, 0-5 V, 0-10 V, 2-10 V voltage signals and 4-20 mA current signals to the voltage signals in the common 0.5-2.5 V range. We designed CPT to output 4-20 mA current signals corresponding to the valve positions based on the PWM signal input from the MCU. We also designed 20 bit optical encoder by using infrared LED and infrared transistor and made the serial communication with the main board possible. When we tested PCU and CPT with DAQ hardware and Labview software, they operated correctly with the small errors within ${\pm}0.003$ V and ${\pm}0.01$ mA, respectively, showing that our actuator has the excellent performance to employ as the industrial proportional-valve-actuator. The resolution of the encoder was $11.25^{\circ}$ and the maximum revolution to detect was 32,768.

• Journal of Korean Society of Forest Science
• /
• v.100 no.2
• /
• pp.154-164
• /
• 2011

This study was conducted to develop the semi-crawler type mini-forwarder that can be operated comfortable small-scale logging operation in the steep terrain and also used at a variety of operations such as the civil work in erosion control and forest-road. Considering the minimum turning radius and the width of forest operation road, the total length, width and loading capacity of the semi-crawler type mini-forwarder is 5,750 mm, 1,900 mm and $2.5m^{3}$, respectively. The maximum engine power is 96ps at 3600 rpm. Selected hydraulic pumps are consists of two main pumps and two sub-main pumps. Main hydraulic pumps are utilized to running motor of the front wheel and rear crawler. Sub-main pumps are utilized to the actuation parts such as steering, crane, out-rigger and dump cylinder. The transmission was adapted as the HST (Hydro-Static Transmission) system. The driving parts are designed and manufactured as the front wheel type and the rear crawler type. The steering type was manufactured as the ackerman type. Driving control parts type was designed and manufactured as driver's seat type of normal cars. It is also attached on auxiliary equipments such as winch, log grapple and out-rigger. The traveling speed of the semi-crawler type mini-forwarder in forest road was 5.3 km/hr to 7.7 km/hr.

• Journal of the Institute of Convergence Signal Processing
• /
• v.25 no.2
• /
• pp.67-76
• /
• 2024

Various types of assistive devices have been developed for upper limb amputees over the years, with myoelectric prosthesis particularly aimed at improving user convenience by enabling a range of hand gestures beyond simple grasping, tailored to the size and shape of objects. In this study, we developed a five-finger myoelectric prosthesis mimicking human hand size and finger movements, utilizing motor and worm gear mechanisms for stable and independent operation. Based on this, we designed a control system for independent finger control through electromyographic signal input, proposed a state transition-based hand gesture conversion algorithm by selecting representative eight hand gestures and defining conversion condition parameters. We introduced training and usability evaluation methods, and conducted usability assessments among upper limb amputees using dedicated tools, confirming the potential for commercial application of the algorithm and observing adaptive capabilities and high performance through iterative evaluations.

• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.11_12
• /
• pp.682-691
• /
• 2005

We present a two-step evolution system that produces controllable virtual creatures in physically simulated 3D environment. Previous evolutionary methods for virtual creatures did not allow any user intervention during evolution process, because they generated a creature's shape, locomotion, and high-level behaviors such as target-following and obstacle avoidance simultaneously by one-time evolution process. In this work, we divide a single system into manageable two sub-systems, and this more likely allowsuser interaction. In the first stage, a body structure and low-level motor controllers of a creature for straight movement are generated by an evolutionary algorithm. Next, a high-level control to follow a given path is achieved by a neural network. The connection weights of the neural network are optimized by a genetic algorithm. The evolved controller could follow any given path fairly well. Moreover, users can choose or abort creatures according to their taste before the entire evolution process is finished. This paper also presents a new sinusoidal controller and a simplified hydrodynamics model for a capped-cylinder, which is the basic body primitive of a creature.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.39 no.6
• /
• pp.42-48
• /
• 2002

The design, construction and performance test of a convenient multi-purpose irradiator is described. A multi-purpose irradiator using Cesium-137 has been developed for studies of low dose radiation effects in biology and for calibration of Thermo Luminescent dosimeter(TLD). During the operation, three rods of radioactive material which are 10cm in length revolve 180 degrees and irradiate biological samples, or TLD, and return to their shielded position, after the programmed time. A programmable Logic Controller(PLC) controls the sequence of operation, interlock, motor rotation and safety system. The rotation speed of biological samples can vary up to 20 RPM. A real time monitoring system was also incorporated to check and control the operation status of the irradiator. The capacity of the irradiation chamber was 4.5 liters. The isodose distribution at arbitrary vertical planes was measured by using film dosimetry. The dose-rate was 0.13 cGy/min in air and 0.11 cGy/min in water equivalent material in the case of Cesium-137. Range of activity was 2 Ci. The homogeneity of dose distribution in the chamber was ${\pm}$7%. The actual radiation level on the surface was within permissible levels. The irradiator had a maximum 0.35 mR/min radiation leakage on its surface.