• 전력전자학회논문지
• /
• 제6권3호
• /
• pp.250-257
• /
• 2001

SRM 드라이브는 펄스 기자력과 스위칭 전류원리상 큰 소음과 진동이 발생된다. SRM 드라이브에서 발생하는 진동.소음의 주된 원인은 상 스위치-오프시의 고정자와 회전자 사이에 자기적인 스트레스로 작용하는 바사방향의 급격한 전자력 변화에 의한 고정자 프레임의 탄성진동에 의해 발생한다. 본 논문에서는 이러한 SRM 드라이브의 진동을 저감하는 방법으로 기존의 SRM에 상권선과 동일한 자속이 발생하도록 단방향 보상권선(Compensating Winding)을 감아 컴뮤테이션 기간동안 2단계 소호전압방식을 적용하는 방법을 제안하고자 한다. 2단계 소호전압방식을 적용함으로서 상전류를 빨리 소호시킬 수 있고 이로 인해 토크 활용구간과 에너지 활용도를 넓힐 수 있어서 큰 출력을 발생시킬 수 있었으며, 진동.소음저감효과를 얻울 수 있었다

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1997년도 전력전자학술대회 논문집
• /
• pp.79-83
• /
• 1997

The inverter fed BLDC(Brushless DC) motor has been increasingly applied to industry and home appliances due to the advance of power electronics and permanent magnet technology, and its high efficiency and good acoustic noise characteristics. The BLDC motor and drives, however, require the rotor position sensors that may cause some problems such as the high cost and space. In this paper, sensorless algorithm for an interior permanent magnet BLDC motor is proposed. The maximum torque per ampere operation with advance angle considering load torque and speed was simulated and verified through the experiment.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제53권9호
• /
• pp.615-621
• /
• 2004

This paper describes the design of a 2-phase stepping motor driver using CPLD. The driver IC such as L297, which is mostly used has some difficulties in PWM current control because of the switching noise of power MOSFETs. The switching noise causes current ripple and acoustic noise. To reduce the switching noise, we designed a digital filter using VHDL. Also we designed constant current method for 1-2 phase(half step) excitation to reduce the torque ripple. Experimental results show the effectiveness of the proposed method. It is enabling further enhancements of stepping motor drive technology broadening the range of applications for the stepping motors.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.758-761
• /
• 2005

This paper describes the acoustic noise spectra of the pseudo-random carrier modulation technique according to the different PRBS(Pseudo Random Binary Sequence) bits. To confirm the validity of the proposed method, a 130v three-phase 5-level inverter motor drives was implemented. The harmonics spectra broadening effect of pseudo random carrier and the acoustic noise radiated from the inverter drives were discussed and verified according to the different bits of shift resister operating as PRBS.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 I
• /
• pp.39-45
• /
• 2001

As HDD moves into new emerging consumer markets, expectations on quietness, as well as performance, have increased. The acoustic noise of HDD seems to be closely related to excitation of the spindle motor system. Recently, as a simple approach to reduce disk vibration, thicker disk, which is 50 mil (1.27mm), starts to use in HDD industry. Noise spectrum of HDD with use of 50 mil disk shows the dominant peaks of 900 Hz, mainly caused by excitations of the disk due to air windage effect. In order to reduce noise at this specific frequency, squeeze air damping effect was investigated by extremely reducing the gap between the disk and the base platform.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.580-582
• /
• 2002

A major problems of Switched Reluctance Motor(SRM) is torque ripple which causes undesirable acoustic noise and vibration. To reduce the torque ripple two different approaches are used. One is to modify a motor geometry, the other is to manipulate motor current to improve performance. This paper presents modifications of the rotor pole shape which reduces the torque ripple.

• 조명전기설비학회논문지
• /
• 제19권3호
• /
• pp.17-26
• /
• 2005

본 연구에서는 유도전동기 구동 시스템에서 새로운 RPWM 방식을 제안하였다. 유도전동기 구동 시스템에서 발생하는 소음을 줄이기 위하여 공간벡터 RPWM방식에 기반을 둔 RPWM방식을 제안하였다. 제안된 RPWM방식을 드럼 세탁기에 적용하여 세탁기에서 발생하는 소음과 진동을 측정하였으며 그 결과를 비교하였다. 제안된 방식의 타당성을 입증하기 위하여 시뮬레이션과 실험을 수행하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.316-319
• /
• 1998

RPWM(Random Pulse Width Modulation) is a switching technique to spread the voltage and current harmonics on the wide frequency area. Using randomly changed switching frequency of the inverter, the power spectrum of the electromagnetic acoustic noise cab be spread to the wide-band area. The wide-band noise is much more comfortable and less annoying than the narrow-band one. So RPWM have been attracting an interest as an excellent method for the reduction of acoustic noise on the inverter drive system. In this paper a new RPPWM (Random Position PWM) is proposed and implemented. Each of three pulses is located randomly in each switching interval. Along with the randomization of PWM pulses, the space vector modulation is executed in the C167 microcontroller also. The experimental results show that the voltage and current harmonics were spread to wide band area and that the audible switching noise was reduced by proposed RPPWM method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.150-156
• /
• 2001

This paper describes an implementation of the DSP(Digital Signal Processor) based triangular carrier frequency modulated RPWM inverter drive system. The power spectrum of the noise emitted from the induction motor was measured in the anechoic chamber. The analysis of the sources for the acoustic noise and the effects of the noise reduction are confirmed by the measured spectra of the noise. Real-time RPWM along with the speed control was achieved by high speed DSP. By changing the center frequency and the bandwidth of the carrier, the proposed real-time RPWM scheme can be used as an efficient switching frequency band acoustic noise reduction method for the inverter drive system with variant load conditions.

• 한국소음진동공학회논문집
• /
• 제11권9호
• /
• pp.454-461
• /
• 2001

Acoustic noise and vibration of a BLDC motor is a coupled phenomenon between mechanical characteristics and electromagnetic origins through the motor air-gap. When a relative misalignment of rotor in the air-gap center exists on the assemblage, it is considered to influence the motor system characteristics. In this paper, the back electro motive force(BEMF) is analyzed by Finite Element Method(FEM) and verified by experiments for the SPM and IPM type motors. For magnetic field analysis, a FEM is used to account for the magnetic saturation. Using these results, the FEM is made to determine the appropriate electromagnetic field analysis in BLDC motors with rotor eccentricity ratio. A radial magnetic imbalance force of BLDC motor with rotor eccentricity is analyzed. Results demonstrate that the imbalance force is increased according to the degree of misalignment. An IPM motor, mostly chosen to realize high-speed operation, shows a worse effect on magnetic unbalanced forces and dynamic responses compared with SPM motor due to magnetic saturation when the rotor eccentricity exists.